• Journal of Korean Society of Forest Science
• /
• v.98 no.6
• /
• pp.780-790
• /
• 2009

The objective of this study was to analyze 'Forestland Classification System' in Korea and to develop a strategy for its improvement. A survey was conducted in this study based on the Delphi technique, one of the interactive survey method relying on a panel of experts. The result indicated that the existing 'Forestland Classification System' was initiated for reasonable management of forestland, but now it turned into one of the most strict management restrictions. To improve forestland management in Korea, it was suggested to adopt 'Forest Function System' in this study. Moreover, to avoid indiscreet landuse conversion that might be occurred by substituting the 'Forest Function System' for the 'Forestland Classification System', it was suggested to adopt 'Forestland Conversion Propriety Assessment System'. In fact, landuse conversion has been regulated by the 'Environmental Impact Assessment System', but this system appeared inadequate to be applied to the forested area. Illegal acts for having permission of landuse conversion for reserved forests was another big issue in the forestland management. For example, alteration of the reserved status of forests or partition into patches smaller than the size limit has been attempted. Thus in this study, it was strongly recommended to take sanction against such illegal acts. In order to enhance the efficiency of forestland management, it was also suggested to integrate administrative agencies related to the landuse conversion or to take over the charge to local governments.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.407-408
• /
• 2011

Natural boron consists of two stable isotopes 10B and 11B with natural abundance of 18.8 atom percent of 10B and 81.2 atom percent of 11B. The thermal neutron absorption cross-section for 10B and 11B are 3837 barn and 0.005 barn respectively. 10B enriched specific compounds are used for control rods and as a reactor coolant additives. In this work 2 methods for boron enrichment were analysed: 1) Gas irradiation in static conditions. Dissociation occurs due to multiphoton absorption by specific isotopes in appropriately tuned laser field. IR shifted laser pulses are usually used in combination with increasing the laser intensity also improves selectivity up to some degree. In order to prevent recombination of dissociated molecules BCl3 is mixed with H2S 2) SILARC method. Advantages of this method: a) Gas cooling is helpful to split and shrink boron isotopes absorption bands. In order to achieve better selectivity BCl3 gas has to be substantially rarefied (~0.01%-5%) in mixture with carrier gas. b) Laser intensity is lower than in the first method. Some preliminary calculations of dissociation and recombination with carrier gas molecules energetics for both methods will be demonstrated Boron separation in SILARC method can be represented as multistage process: 1) Mixture of BCl3 with carrier gas is putted in reservoir 2) Gas overcooling due to expansion through Laval nozzle 3) IR multiphoton absorption by gas irradiated by specifically tuned laser field with subsequent gradual gas condensation in outlet chamber It is planned to develop software which includes these stages. This software will rely on the following available software based on quantum molecular dynamics in external quantized field: 1) WavePacket: Each particle is treated semiclassicaly based on Wigner transform method 2) Turbomole: It is based on local density methods like density of functional methods (DFT) and its improvement- coupled clusters approach (CC) to take into account quantum correlation. These models will be used to extract information concerning kinetic coefficients, and their dependence on applied external field. Information on radiative corrections to equation of state induced by laser field which take into account possible phase transition (or crossover?) can be also revealed. This mixed phase equation of state with quantum corrections will be further used in hydrodynamical simulations. Moreover results of these hydrodynamical simulations can be compared with results of CFD calculations. The first reasonable question to ask before starting the CFD simulations is whether turbulent effects are significant or not, and how to model turbulence? The questions of laser beam parameters and outlet chamber geometry which are most optimal to make all gas volume irradiated is also discussed. Relationship between enrichment factor and stagnation pressure and temperature based on experimental data is also reported.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.5
• /
• pp.651-662
• /
• 2023

Recently, research on the use of Building Information Modeling(BIM) for various construction management activities is being actively conducted, and interest in 3D model-based estimation is increasing because it has the advantage of being able to be automatically performed using the attribute information of the 3D model. Therefore, this study aimed that the difference in the quantities is calculated the quantity based on the 2D drawing of a building and is extracted from the 3D model created by the Revit software was compared and tried to find out the cause. The difference in the quantity calculated by the two methods was the largest in the formwork, followed by the smallest in the order of the quantity of rebar and concrete. The reason for this difference is that there is a part where the quantity extraction in the 3D model is not suitable for the quantity calculation standard, and in particular, in the case of formwork, it was difficult to separate only the quantity of the necessary part. In addition, since the quantity of rebar was not separated by member, it was impossible to accurately compare the quantity and identify the cause of the difference. Therefore, it is considered to be the most reasonable to use application software that imports only the numerical information necessary for quantity calculation from the 3D model and applies a separate calculation formula.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.15 no.4
• /
• pp.214-223
• /
• 2003

A reliability analysis is straightforwardly applied to the sloped coastal structures against the random wave overtopping. A reliability function can be directly derived from a empirical formula in which may take into account many variables associated with the random wave overtopping. The probability of failure exceeded the allowable overtopping discharge can be evaluated as a function of dimensionless crest height with some reasonable statistical properties and distribution functions of each random variable. Some differences of probabilities of failure occurred from variations of the slopes of structures as well as types of armour are investigated into quantitatively. Additionally, the effects of the crest width of units placed in front of the concrete cap on the probability of failure may be analyzed. Finally, the sensitivity analyses are carried out with respect to the uncertainties of random variables. It is found that the overall characteristics similar to the known experimental results are correctly represented in this reliability analyses. Also, it should be noted that the probabilities of failure may be quantitatively obtained for several structural and hydraulic conditions, which never assess in the deterministic design method. Thus, it may be possible for determination on the crest height of sloped coastal structures to consider the probability of failure of wave overtopping, by which may be increased the efficiency of practical design.

• KIISE Transactions on Computing Practices
• /
• v.23 no.7
• /
• pp.397-407
• /
• 2017

Wireless networks make the users' work more convenient and efficient, but such networks can impair the availability of network resources and can cause leakage of important corporate information when there are security threats. In particular, damage has increased because of security attacks that take advantage of the vulnerabilities created by a wireless AP (Access Point). Public organizations and companies have gradually selected the WIPS (Wireless Intrusion Prevention System) to block wireless security threats and protect the internal network. However, it is very costly for other organizations and companies to introduce the WIPS solution. This paper proposes implementing a WIPS Sensor by using Raspberry Pi to reduce these costs and to block the various wireless LAN security threats. This implementation would protect corporate information and provide consistent services at a relatively reasonable price.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.2
• /
• pp.250-256
• /
• 1998

The culture of makeup has early developed in China. Especially, beautiful eyebrows were the symbol of a beauty. This study is related to fashionable Cheong-Dae in Han Dynasty. In Han Dynasty, women painted thier eyebrows with blue color in a different color from former periods. This fact has close connection with the bordering countries on Western China. Together with Hu fashion having been in fashion during trading directive with Western China women has seemed to use Cheong-Dae for their makeup in Han Dynasty. In Hand Dynasty, Ferghana women had very often used it for their makeup. And it had produced in Ferghana, Jaguda, Kashkar. In Tang Dynasty, it has been said that Persia was the best. Let's take a look at the producing method. Soak indigo plants in water add lime and stir it up, then bubbles are formed. They are called it as Cheong-Dae. Nearly, they are produced in the course of indigo dying. So we can see inflowing course of Cheong-Dae into China through the history of Indigo dying. We can guess the use of Cheong-Dae in Egypt. Indeed, Nile Blue is used for the Protection their access from insects as well as effect of coolness visually. This guess is very reasonable because the fact is considered that some people dye with indigo color by the way of sedimentation in Peniasula of Sinai. Also, the PH of Cheong-Dae is about 7. So, it does no harm in skin and its color is dark blue. Cheong-Dae has effects of insecticide and removal of fever. Cheong-Dae that had been used in Peninsula of Egypt seems to have been carried into China through Silk Route. And by trial to make Cheong-Dae it is proved that its ingredient is plant.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.13
• /
• pp.329-346
• /
• 2000

The marine cargo insurance is mainly the insurance on foreign trade commodities. The sales contract stipulates as to which of the seller or the buyer should arrange the insurance. In other words, if the sales contract is made on the C.I.F. terms, the seller has to arrange the insurance, while, in the case of F.O.B. or C.F.R. terms, the buyer has to arrange it. The F.O.B. or C.F.R. terms means that the seller has to take out an insurance for himself until the cargo being loaded onboard the overseas vessel at the port of shipment in export country. But our country has not reasonable insurance to cover seller's risk, because it hasn't yet implemented the insurance. In respect of a cargo exported from Korea on F.O.B. or C.F.R. terms, the F.O.B. insurance covers comprehensively the inland transit and storage until the cargo being loaded onboard the overseas vessel at the port of shipment in Korea with a certain limitation of a insurance period. The goal of this study is to analyze the development propriety of F.O.B. Insurance. This could be done through analyzing the volume and analyzing the proportion of F.O.B. or C.F.R. terms for export. It is supposed that the potential demands of F.O.B. insurance are sufficient in our country for developing the F.O.B. insurance. At this point of time, the positive development of F.O.B. insurance for export is inevitable from the viewpoint of present situation of trading circles.

• Journal of Distribution Science
• /
• v.14 no.10
• /
• pp.47-57
• /
• 2016

Purpose - This study's purpose is to investigate the market structure of the Korean duty free shop industry that has received recent attention from researchers and practitioners. By raising the question of whether or not the Korean duty free shop industry is unequivocally monopolistic, a wider viewpoint is provided. The study seeks to offer insights and managerial implications for marketers and policy makers who are in charge of regulating major Korean duty free shops. Research design, data, and methodology - The authors use secondary data from various sources, including Korea Customs Service and the Moodie Report, to investigate the structure of the duty free shop industry of Korea. Based on several theories, they present various criteria and statistical evidence such as K-firm concentration ratio, HHI, consumer substitutability, excess profit, and marketing costs. Results - In terms of consumer substitutability, it is difficult to confirm whether or not the Korean duty free shop industry is monopolistic. Notwithstanding monopoly characteristics in terms of market share, neither the company Lotte nor Shilla appear to have market dominating power. It is not easy for either of them to control prices or to achieve a much lower operational profit ratio due to a dominant bargaining power. Moreover, the license is not an economic rent. In this situation, it is not easy for these companies to obtain an excessive profit. Conclusions - Considering that most global duty free shops are trying to go upscale to improve bargaining power, it does not seem likely that rigid regulations are needed in the industry. Even though the Korean duty free industry ostensibly has a monopolistic structure, government and policy-makers should look beyond the surface. They should take global and other reasonable criteria into consideration when they establish or change regulation policies. Thorough understanding and appropriate support are needed for the Korean duty free shop industry. Additionally, duty free shops should position themselves as global companies struggling against unlimited international competition, rather than Korean domestic companies. At the same time, they need to give customers appropriate information about the benefits they provide.

• Journal of the Korean Society of Safety
• /
• v.17 no.4
• /
• pp.184-188
• /
• 2002

According to a recent report, Korea first reached aging society in 2000 and it is forecasted that the number of aged people over 65 years old will increase form 7.13%(2000) to 14% or more of total population in Korea in 2022. As many aged peoples are employed as day labor under the financial circumstances after Korean Financial Crisis, it is critical that we should take safety control measures for them. Thus, this study focused on analyzing aged accidents in terms of their characteristics, based on the actual trend of industrial accidents from 1996 to 2001 and the applications of medical treatment for the affected or wounded in Busan metropolitan area for recent 3 years (1999 to 2001) in order to analyze accident characteristics to cope with emergent aging period. As a result of analyzing the above data by job type, it was found that the construction work amounted to 38% of total job type. This result implies that accidents of the aged often occurs in 3D jobs including construction works without reasonable automation, which requires us to establish some preventive policies against those accidents. Moreover, it is found that rapid increasing accidents such as upset or occupational diseases or damages are typically attributed to those in the aged, mainly because the aged employees over 55 years old often have disadvantageous physical conditions such as relatively degraded balance and muscular control ability comparing to the younger. Therefore, it recommended that we should make effective safety policies for the aged and actively apply those policies to them. Moreover, it is required that we should encourage them to actively participate in safety compliance through corresponding trainings.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.10a
• /
• pp.230-239
• /
• 2006

The depth, width and alignment of fairway that are main port water facilities should be designed considering the various elements including particulars of design ships, weather and sea conditions around fairway and method of ship-handling. However not only the existing Japanese design standard for fairway and also those of other countries do not take into consideration of such kind of elements and no design standard is made by quantitative analysis. In this circumstance the new design standard (Approach Channels, A Guide for Design) depending on classified various elements and quantitative analysis was proposed in 1997 by PIANC and IAPH. But it was proved that calculated values according to this standard were unfounded and had some problems to output the discontinuous value by small difference of calculation condition because the each value fur each element was simply added. And also it is hard to apply this standard to the design of port water facilities in Japan because this [A Guide for Design] is the design standard for long channels in European port. The proposal of more reasonable Japanese standard will be expected by applying the study result of naval architecture and navigation and by the cooperation of ship operators to use fairway, naval architects to built ships and civil engineers to dredge fairway. The concept of a fairway in 'Design standard fur fairway in next generation' is defined as passage for approach channel) and traffic lane designated by light buoys as navigable water for safe navigation. In 'Design standard for fairway in next generation' depth, width and alignment are picked up among many design elements of a fairway. Design method for those elements is shown based on design ships and navigational environments. This standard shows the method of design for each dimension depending on characteristic on design ship and weather and sea condition. On the other hand, in case of existing fairway, it is possible to decide the size of ship and navigation criteria by opposite analysis.