• 한국생산제조학회지
• /
• 제20권1호
• /
• pp.23-27
• /
• 2011

This study analyzes about the variation of pressure and stream velocity according to the movement of tail wing. The pressure at the front part of airplane becomes lower than at the rear part and the stream velocity has decreased by being bumped against the wing of airplane. The pressure at the front part of rudder becomes higher than at its rear part according to the movement of rudder among the tail wings of airplane. The more stream velocity becomes decreased, the more rudder spreads out. As the tail wing of airplane folds, the pressure at its front part becomes higher. And the pressure at its rear part becomes lower than at its front part. The more tail wing of airplane folds, the more stream velocity becomes decreased.

• 한국항공우주학회지
• /
• 제45권10호
• /
• pp.817-824
• /
• 2017

꼬리날개 조종 유도무기의 주날개-꼬리날개 간섭 현상에 대한 연구를 수행하였다. 풍동시험 데이터를 이용하여 주날개-꼬리날개 간섭 정도를 산출하였으며 날개간의 간섭 현상이 전체 공력에 미치는 영향을 분석하였다. 성분 시험 결과를 이용하여 downwash angle을 산출하였으며 날개간의 간섭 영향을 받음각에 대한 비율로 나타내었다. 날개간의 간섭현상 발생 시 유동 특성을 살펴보기 위해 수치해석을 실시하였으며 받음각에 대한 vorticity 특성을 비교하였다. 실험적, 수치적 연구를 통해 주날개-꼬리날개 간섭현상이 유도무기의 정안정성에 큰 영향을 미침을 확인하였다.

• 항공우주시스템공학회지
• /
• 제7권3호
• /
• pp.15-19
• /
• 2013

Tail wing is important to designing of civil aircrafts, because it is responsible for aircraft stability and control. Tail wing has a role in aircraft control and makes aircraft fly stably without any pilot control input. Also, designing of tail wing determine trim drag force in whole aircraft. Center of gravity(CG) of aircraft travels with various effects as placement of passenger's seats, location of cargo bay, etc. In designing horizontal tail volume, aircraft CG travel has to be considered to have margin so that it should be sized to provide adequate stability and control for the airplane's entire CG range throughout the flight envelope. Finally, it is essential to have sufficient elevator control to perform stall at forward CG for all flaps down configurations. Such stalls establish the FAR stall speed which airplane take-off and landing performance. This paper deals with the process for tail wing design regarding the aircraft CG travel and results for 95-seat type turboprop aircraft.

• 한국항공우주학회지
• /
• 제49권2호
• /
• pp.85-93
• /
• 2021

본 논문에서는 반경험적 해석도구를 이용하여 일반적인 형상의 꼬리날개 조종 유도무기의 공력 특성을 예측하고 그 결과를 보정하는 연구를 수행하였다. 반경험적 해석도구의 공력 특성 예측 결과를 풍동시험 결과와 비교하여 오차 원인을 확인하였으며, 반경험적 해석도구의 주요 오차 요인은 주날개-꼬리날개 간 간섭 성분임을 확인하였다. 반경험적 해석 결과를 풍동시험 결과와 전산해석 결과를 이용하여 보정하였으며, 보정된 데이터가 풍동시험 결과와 잘 일치함을 확인하였다. 본 연구를 통해 일반적인 꼬리날개 조종 유도무기의 공력 특성을 반경험적 해석도구를 이용하여 예측할 때 날개 간 간섭 성분 보정이 필요함을 확인하였다.

• International Journal of Aerospace System Engineering
• /
• 제6권1호
• /
• pp.1-7
• /
• 2019

In the present study, structural safety and stability on the main wing and tail planes of the 1.2 ton WIG(Wing in Ground Effect) flight vehicle, which will be a high speed maritime transportation system for the next generation, was performed. The carbon-epoxy composite material was used in design of wing structure. The skin-spar with skin-stressed structural type was adopted for improvement of lightness and structural stability. As a design procedure for this study, the design load was estimated with maximum flight load. From static strength analysis results using finite element method of the commercial codes. From the stress analysis results of the main wing, it was confirmed that the upper skin structure between the second rib and the third rib was unstable for the buckling load. Therefore in order to solve this problem, three stiffeners at the buckled region were added. After design modification, even though the weight of the wing was a little bit heavier than the target weight, the structural safety and stability was satisfied for design requirements.

• 대한기계학회논문집B
• /
• 제28권7호
• /
• pp.800-808
• /
• 2004

Wind tunnel test of an airplane model with forward swept wing was done in KARI LSWT to evaluate and measure the aerodynamic characteristics of initially designed configuration. Since the given wing planform did not fully satisfy the design requirements, local flow control devices such as vortilon, vortex generator and flow fence were used to delay separation and to enhance aerodynamic characteristics. Also decision making processes of design parameters such as vertical tail boom length, the location, size and the incidence angle of horizontal tail were discussed. The general aerodynamic characteristics of forward swept wing for various control surface deflection conditions of flap, aileron and elevator were also given.

• 한국항공우주학회지
• /
• 제45권3호
• /
• pp.173-179
• /
• 2017

본 논문에서는 모션캡쳐 카메라를 사용한 실험을 통해 날갯짓 비행체의 주 날개, 꼬리날개 구동기 특성 분석에 대하여 기술하였다. 실험은 빛이 차단된 실내에서 진행되었고 지그에 기체를 고정하여 날갯짓으로 인한 영향을 줄였다. 주 날개와 꼬리날개 끝단에 마커를 부착하였고 모션캡쳐 카메라는 입력 신호에 대한 각각의 반응을 측정한다. 실험 결과 주 날개는 날갯짓의 주파수에 따라 진폭이 변하는 경향을 보였고, Modified Strip Theory에 실험 결과와 비행체 제원을 적용하여 양력 및 추력 발생 시뮬레이션을 구현 하였다. 꼬리날개는 종 횡축별로 스텝 신호를 인가하여 이에 따른 결과를 2차 전달함수 형태로 정의하였고, 각 축별로 구동기의 구조 차이로 인하여 최종 응답시간, 오버슈트, 최대값 등에서 차이를 나타내는 것을 확인하였다.

• Proceedings of the National Institute of Ecology of the Republic of Korea
• /
• 제2권1호
• /
• pp.21-25
• /
• 2021

We measured the sizes of microstructures and the reflectance of blue feathers in the Common Kingfisher (Alcedo atthis). The colors were mainly produced in the barbs, which were composed of keratin sponge layers with air spaces and melanin rods. The reflectance spectra of back and tail feathers of the Common Kingfisher showed a peak with a broad plateau in the visible wavelength, whereas those of the wing feathers showed peaks in ultraviolet and visible and short-wavelengths. Moreover, the reflectance of back and tail feathers was higher than that of wing feathers. The blue color of the feathers comes from the keratin sponge layer due to coherent scattering. The back and tail feathers are composed of the keratin sponge layer only, and the wing feathers are composed of the keratin sponge layer and the keratin honeycomb structure. Due to the difference in these structures, it supposed that the reflectance is different. Determining why the reflectance spectra of the back and tail feathers were flattened will require further study.

• 한국군사과학기술학회지
• /
• 제7권3호
• /
• pp.149-156
• /
• 2004

In this study, vibration and aeroelastic analyses of a T-tail have been conducted. The structural dynamic computations of the T-tail are performed using MSC/NASTRAN and CFD-based computational aeroelastic analysis method is used to investigate the complex flutter phenomena. The results for vibration and aeroelastic analyses in the frequency and time domains are presented. It is importantly shown that the modal coupling of the torsional mode of vertical-wing and the asymmetric bending mode of horizontal-wing parts can give sensitive effects for the flutter stability of T-tail configurations.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 추계학술발표대회 논문집
• /
• pp.173-178
• /
• 2005

In this paper, an efficient and robust analysis system for the flutter optimization of laminated composite wings has been developed using the coupled computational method based on the genetic algorithm. General three-dimensional doublet-lattice method is efficiently used to compute generalized aerodynamic forces of T-tail configuration in the frequency domain. Structural dynamic analyses of laminated composite T-tail models are conducted using finite clement method. The classical P-k flutter analysis technique is applied to effectively solve the aeroelastic governing equations in the frequency domain. Optimum design studies using genetic algorithm have been conducted in order to obtain maximum flutter stability of a composite T-tail configuration. The results show that flutter stability can be significantly increased using composite materials with proper optimum design concepts even for the same weight and shape condition. In the view point of engineering design, it is also importantly shown that the optimization of the vertical wing part is highly effective comparing to the optimization of horizontal wing part.