• 한국생산제조학회지
• /
• 제21권1호
• /
• pp.40-45
• /
• 2012

The glass edge sealing is one of the vacuum glazing core manufacturing process and it needs the high reliability for the vacuum keeping. Conventionally, the glass edge sealing had been being researched by the method that pasted the flit on the glass edge part and bonded two sheets of glass. But this way has the defect that can't make tempered glass. In order to remedy it's faults, in this paper, the glass edge was sealed by using the hydrogen mixture gas torch within the furnace. The parameter having an effect on the glass edge sealing through the basic test was set. And the correlation of the thickness of the glass edge and parameter were analyzed through the design of experiment. By using the Taguchi method, the optimal process condition for the glass edge sealing was drawn and the validity was verified.

• 통합자연과학논문집
• /
• 제6권1호
• /
• pp.39-45
• /
• 2013

Robust design is an approach to reducing performance variation of quality characteristic values in quality engineering. Taguchi has an idea that mean and variation are handled simultaneously to reduce the expected loss in products and processes. In the Taguchi parameter design, the product-array approach using orthogonal arrays is mainly used. However, it often requires an excessive number of experiments. An alternative approach, which is called the combined-array approach, was studied. In these studies, only single quality characteristic (or response) was considered. In this paper we propose how to simultaneously optimize for multiple quality characteristics (or multiresponse) using desirability function when we used the combined-array approach to assign control and noise factors.

• 품질경영학회지
• /
• 제27권2호
• /
• pp.218-236
• /
• 1999

The purpose of parameter design is to determine optimal settings of design parameters of a product or a process such that the performance characteristics of a product exhibit small variabilities around their target values. Taguchi made significant contributions in this area. However, his analysis of the problem focused on only one performance characteristic or response, although in product and process design, multiple characteristics are more common. The critical problem in dealing with multiple characteristics is how to compromise the conflict among the selected levels of the design parameters for each individual characteristic. In this paper, Methodology using SN ratio optimized by univariate technique is proposed and a parameter design procedure to achieve the optimal balance among several different response variables is developed. Existing case studies are solved by the proposed method and the results are compared with ones by the sum of SN ratios, the expected weighted loss, the desirability function, and EXTOPSIS model.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.322-325
• /
• 2000

In the previous report1), the grinding characteristics of quartz were investigated. In this paper, the grinding mechanisms of brittle materials including ceramics and quartz are modeled and a new parameter SDR(Surface roughness Direction Ratio) is proposed to characterize the grinding mechanisms of such materials. A set of experiments were performed to verify the effectiveness of the suggested parameter. The experimental results indicate that the plastic deformation is the dominant material removal mode at the grinding conditions which show the higher value of SDR. In the case of quartz, the material was removed by brittle fracture in a lower value of SDR and by plastic deformation in a higher value of it. SDR is not affected by wheel mesh size when brittle fracture occured. But in the plastic deformation case, SDR value increases with wheel mesh size.

• 한국암반공학회:학술대회논문집
• /
• 한국암반공학회 2000년도 암반공학문제의 수치해석(Numerical Analysis in Rock Engineering Problems)
• /
• pp.229-234
• /
• 2000

발파진동의 전달과 감쇠 특성에는 대상 암반의 특성과 장약량 등이 영향을 미친다. 본 연구에서는 암반의 물성과 장약량의 변화가 발파진동의 전파에 미치는 영향을 파악하기 위해 유한차분 해석프로그램(FLAC)을 이용하여 해석하였다. 대상 지역은 광주시 제2순환도로 공사장이며 설계시 조사된 암반 물성치를 토대로 하였고, 주된 방법으로는 해석의 최대 주요인자를 추정할 수 있는 실험계획법 중 하나인 Taguchi법을 사용하였다. 해당 지반의 각 물성치와 장약량의 변수 레벨을 결정하였고, 이에 의거하여 거리별 발파진동의 전파과정을 고찰하였다. 그 결과 본 연구에서 고려된 암반의 물성치 중에서 발파진동 전달에 가장 영향을 크게 주는 인자는 밀도인 것으로 나타났다.

• 터널과지하공간
• /
• 제10권3호
• /
• pp.475-480
• /
• 2000

발파진동의 전달과 감쇠 특성에는 대상 암반의 특성과 장약량 둥이 영향을 마친다. 본 연구에서는 암반의 물성과 장약량의 변화가 발파진동의 전파에 미치는 영향을 파악하기 위해 유한차분 해석프로그램 (FLAC)을 이용하여 해석하였다. 대상 지역은 광주시 제2순환도로 공사장이며 설계시 조사된 암반 물성치를 토대로 하였고, 주된 방법으로는 해석의 최대 주요인자를 추정할 수 있는 실험계획법 중 하나인 Taguchi 법을 사용하였다. 해당 지반의 각 물성치와 장약량의 변수 레벨을 결정하였고, 이에 의거하여 거리별 발파진동의 전파과정을 고찰하였다. 그 결과 본 연구에서 고려된 암반의 물성치 중에서 발파진동 전달에 가장 영향을 크게 주는 인자는 밀도인 것으로 나타났다.

• 한국국방경영분석학회지
• /
• 제25권2호
• /
• pp.62-72
• /
• 1999

Taguchi´s parameter design is to determine the optimal settings of design parameters of a product or a process such that the characteristics of a product exhibit small variabilities around their targer values. His analysis of the problem has focused only on a single characteristic or response. However the quality of most products is seldom defined by a characteristic, and is rather the composite of a great number of characteristics which are often interrelated and nearly always measured in a variety of units. The critical problem in dealing with multiple characteristics is how to compromise the conflict among the selected levels of the design parameters for each individual characteristic. In this paper, Methodology using SN ratio optimized by unvariate technique is proposed and a parameter design procedure to achieve the optimal compromise among several different response variables is developed. One existing case study is solved by the proposed method and the results are compared with ones by the sum of SN ratios, the expected weighted loss, the desirability functions, and EXTOPSIS model.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.568-574
• /
• 1998

A systematic procedure for designing a direct-radiator-type loudspeaker has been developed, based on a numerical vibro-acoustic analysis and the Taguchi method. The finite-element model of the speaker cone has been used to calculate the vibration response of the cone excited by the voice coil. The vibration response of the speaker cone has been used as a boundary condition for the acoustic analysis, and the acoustic frequency characteristics of the loudspeaker have been calculated by the boundary element method. The numerical model has been confirmed by comparing the numerical results with experimental ones obtained in an anechoic chamber. Some design parameters contributing dominantly to the acoustic characteristics have been selected by using the Taguchi method, and the variations of the acoustic characteristics due to the changes of the parameter values have been examined using the numerical model.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.483-486
• /
• 2001

Rapid Prototyping(RP) has been widely applied in designing and developing processes a new product. The functional requirements of a rapid prototyping system are high speed and high accuracy, and they depend on the operating parameters, some of which can be set by users. The accuracy is evaluated by dimensional errors and form errors of manufactured pars. A specially designed specimen with various features has been used for the accuracy evaluation. According to the Taguchi experimental design techniques, and orthogonal array of experiments has been set which has the least number of experimental runs to find the parametric effects. A laser scanner is used to obtain the point data of the parts and Surfacer is used to determine the lengths and angles. The conditions for the FDM manufacturing parametrs have been found.

• 한국공작기계학회논문집
• /
• 제15권3호
• /
• pp.45-52
• /
• 2006

Burrs formed during face milling operations can be very difficult to characterize since there exist several parameters which have complex combined effects that affect the cutting process. Many researchers have attempted to predict burr characteristics including burr size and shape, using various experimental parameters such as cutting speed, feed rate, in-plane exit angle, and number of inserts. However, the results of these studies tend to be limited to a specific process parameter range and to certain materials. In this paper, the Taguchi method, a systematic optimization method for design and analysis of experiments, is introduced to acquire optimum cutting conditions for burr minimization. In addition, an in process monitoring scheme using an artificial neural network is presented for the prediction of burr types.