• 품질경영학회지
• /
• 제26권2호
• /
• pp.17-26
• /
• 1998

Taguchi's parameter design is a method for quality improvement by making the performance fo a system robust to noise. Parameter design with dynamic characteristics has been recently the subject of much interest. This paper is concerned with a review and a generalization of the Signal-to-Noise (SN) ratio, a quality measure for parameter design with dynamic characteristics, proposed by Taguchi. We present a method for determination and analysis of the generalized SN ratio and illustrate its implementation by example.

• 대한산업공학회지
• /
• 제41권1호
• /
• pp.97-104
• /
• 2015

An electric-motor which uses electric energy to dry laundry in a dryer generates wind by rotating a fan. The roles of electric motor and fan are crucial for drying. To reduce the noises or vibration, their performances should be improved. However, it requires a relatively high cost to redesign them. In this case, redesigning the fan case rather than the motor or the fan would be easier and cheaper. This paper is to apply Taguchi dynamic characteristic concept with the ideal function of energy conversion to redesign the fan case. Not only the increase of the wind power but also the decrease of noise, vibration and the other side effects are resulted.

• 산업경영시스템학회지
• /
• 제37권4호
• /
• pp.259-268
• /
• 2014

Uniform brightness is very crucial for LCD panels, which should be made in during manufacturing. Usually some compensating algorithms are applied to recover the brightness deviation that occurs in actual panels. Although such remedying tools are used, it is very hard to prevent horizontal or vertical crosstalks that represent the brightness level difference in horizontal or vertical direction. This research applied transformability Taguchi dynamic characteristics and "nominal is best" static characteristic simultaneously to design the compensating circuit optimally that may reduce the crosstalks and make uniform brightness level.

• 품질경영학회지
• /
• 제27권2호
• /
• pp.101-111
• /
• 1999

The purpose of Taguchi's robust design lies in quality improvement by making the performance of a system robust against noise. Robust design with continuous performance characteristics has been the subject of much interest. However relatively little work has been done for discrete characteristics such as 0-1, good-medium-bad, etc. This paper is concerned with robust design of a discrete dynamic system. We first investigate the Taguchi method for robust design with discrete dynamic characteristics and discuss his standard error probability (SEP). Then we propose a generalized SEP, which makes it possible to encompass a wider class of robust design problems. An illustration is also given by example.

• 품질경영학회지
• /
• 제45권4호
• /
• pp.1003-1020
• /
• 2017

Purpose: The purpose of this study is to find the optimum working conditions for spot welding of wire Cu alloys to achieve high-level quality. The parts subject to spot welding are brush card assemblies, which are the main module of the electric movement method of the car seat. Methods: In this study, the signal-to-noise ratio(SN ratio) and the loss function [L(y)] are used as Taguchi method for dynamic characteristics. Results: The results of the study are as follows. First, the analysis of variance using SN ratio showed 6 significant factors(p = 0.1% or less) among 7 factors except press force. Second, the optimal design of the dynamic characteristics is the tip exchange cycle: 50,000 ea., the welding time is 110 ms, the pressing force is 11 kgf/cm2, the rise time is 40 ms, and the tip dressing is 3,000 ea., Tip angle is 12o and electric current is 1,800 A. Conclusion: The validity of the spot welding process of the manufacturer's brush card assembly was verified and proved to be consistent with the study results. The results of this study are expected to standardize the welding conditions and guarantee the quality level required by the customers.

• 한국자동차공학회논문집
• /
• 제7권6호
• /
• pp.198-206
• /
• 1999

An automobile outside rear view mirror system has been analyzed and designed to reduce vibration with a finite element model. model analysis is conducted for the calculation of natural frequencies. harmonic analysis is utilized to estimate the displacements of the glass surface under dynamic loads. The model is verified with the vibration experiment of the parts and the assembled body. The structure of the mirror system is optimized for the robustness defined by the Taguchi concept. At first, many potential design variables are defined. Final design variables are selected based on the amount of contribution on the objective function. That is, sensitive variables are chose. The SN ratio in the Taguchi method is replaced by an objective function with the mean and the standard deviation of the quality characteristic. The defined objective function is appropriate in the structural design in that the vibration displacements are minimized while the robustness is improved.

• 산업경영시스템학회지
• /
• 제19권39호
• /
• pp.243-254
• /
• 1996

In this study, a model and an analysis method for parameter design is presented a linear relation between the input signal and the ideal value of a performance characteristic. Furthermore, There presented a new performance measure, expected quality loss after adjustment, which is proved to be equivalent to Taguchi's SN ratio approximately. On the basis of this, a two-step optimization procedure is proposed for parameter design considering the signal factor and the quality characteristics with continuous variable. Proposed procedure and Taguchi two-stage procedure are compared.

• 품질경영학회지
• /
• 제25권4호
• /
• pp.88-98
• /
• 1997

For quality improvement, it is important to reduce variations of the quality characteristic. That can be achieved by the a, pp.ication of parameter design methodology to make the performance of the quality characteristic robust over the variety of noise conditions. Taguchi has used the signal-to-noise ratios for that purpose. For the static target characteristic and the dynamic characteristic problem, we propose a reasonable generalized SN ratio and p-value plot for identifying dispersion factors. The orginal idea of the p-value plot in from the gamma-plot in Lunani, Nair & Wasserman(1995). The graphic advantage of the p-value polt for identifying dispersion factors is illustrated through constructed examples.

• 지능정보연구
• /
• 제23권1호
• /
• pp.47-67
• /
• 2017

강판 표면 결함은 강판의 품질과 가격을 결정하는 중요한 요인 중 하나로, 많은 철강 업체는 그동안 검사자의 육안으로 강판 표면 결함을 확인해왔다. 그러나 시각에 의존한 검사는 통상 30% 이상의 판단 오류가 발생함에 따라 검사 신뢰도가 낮은 문제점을 갖고 있다. 따라서 본 연구는 Simultaneous MTS (S-MTS) 알고리즘을 적용하여 보다 지능적이고 높은 정확도를 갖는 새로운 강판 표면 결함 진단 시스템을 제안하였다. S-MTS 알고리즘은 단일 클래스 분류에는 효과적이지만 다중 클래스 분류에서 정확도가 떨어지는 기존 마할라노비스 다구찌시스템 알고리즘(Mahalanobis Taguchi System; MTS)의 문제점을 해결한 새로운 알고리즘이다. 강판 표면 결함 진단은 대표적인 다중 클래스 분류 문제에 해당하므로, 강판 표면 결함 진단 시스템 구축을 위해 본 연구에서는 S-MTS 알고리즘을 채택하였다. 강판 표면 결함 진단 시스템 개발은 S-MTS 알고리즘에 따라 다음과 같이 진행하였다. 첫째, 각 강판 표면 결함 별로 개별적인 참조 그룹 마할라노비스 공간(Mahalanobis Space; MS)을 구축하였다. 둘째, 구축된 참조 그룹 MS를 기반으로 비교 그룹 마할라노비스 거리(Mahalanobis Distance; MD)를 계산한 후 최소 MD를 갖는 강판 표면 결함을 비교 그룹의 강판 표면 결함으로 판단하였다. 셋째, 강판 표면 결함을 분류하는 데 있어 결함 간의 차이점을 명확하게 해주는 예측 능력이 높은 변수를 파악하였다. 넷째, 예측 능력이 높은 변수만을 이용해 강판 표면 결함 분류를 재수행함으로써 최종적인 강판 표면 결함 진단 시스템을 구축한다. 이와 같은 과정을 통해 구축한 S-MTS 기반 강판 표면 결함 진단 시스템의 정확도는 90.79%로, 이는 기존 검사 방법에 비해 매우 높은 정확도를 갖는 유용한 방법임을 보여준다. 추후 연구에서는 본 연구를 통해 개발된 시스템을 현장 적용하여, 실제 효과성을 검증할 필요가 있다.