• Journal of the Korean Society of Clothing and Textiles
• /
• v.11 no.3 s.25
• /
• pp.41-55
• /
• 1987

The purpose of this study is to investigate the effects of napping of knitted fabric on wear sensation and physiological responses. Experimental garments were four types of warm-ups made of either $100\%$ PET or $65/35\%$ P /C and either napped or unnapped respectively. Two healthy young female adults were chosen as subjects for the experiment. Experimental room conditions were as follows: Temp., $22\pm0.5^{\circ}C$ R.H., $54\pm3\%$ and Air Velocity, 0.25m/ sec or 2. 86m/sec. The subjects exercised on bicycle ergometer and rested alternatively for totally 45-min. The results are summarized as follows. 1) With napped Warm-up, chest, back, mean skin temp. and microclimates, i.e., temp., relative humidity and water vapor pressure inside the clothing, were higher than with unnapped warm-up. And there was no difference in pulse rate between napped and unnapped warm-ups. 2) Wear sensations of thermal, humidity, tactile and comfort were 'more hot' and 'more uncomfortable' in 0.25m/sec air velocity. but in 2.86m/sec condition the tactile sensation was 'better' and 'more comfortable' with napped warm-ups. According to Pearson's Correlation, among various kinds of wear sensations, tactile is most related with comfort. From these results, it can be concluded that napped fabric decreases the rate of heat trans? mission and moisture diffusion through the clothing. Therefore skin and body temp. and temp., R.H., Vapor Pressure inside the clothing are increased.

• Journal of Biomedical Engineering Research
• /
• v.25 no.2
• /
• pp.145-150
• /
• 2004

In this study for the prosthesis of the spatial and directional sensation for the blind, an ultrasonic scale system and an electronic compass system were developed. The ultrasonic scale utilizes 40 ㎑ sound for the detection of distance to the barrier and the spatial information is transferred to the blind by various sound interval, which is proportional to the distance. The electronic compass utilizes a magnetoresistor bridge for the detection of the magnetic field strength of earth in horizontal plane. The information for the direction of the earth's north is transferred by tactile stimuli by a vibrating motor band around upper head. Detection distance of the ultrasonic scale is ranged from 0.065 to 3.26 meters, and the detection angle resolution of the electronic compass is about 22.5 degrees. The integrated system of the ultrasonic scale and the electronic compass was developed. Distance information is converted to the location of the tactile stimulation along the clockwise direction by a vibrating motor according to the distance installed around upper head of the blind. The intent of this article is to provide an practical prosthetic tool of spatial and directional sensation for the blind. Daily practice of this system will improve the usefulness of this system.

• Journal of Korean Society for Quality Management
• /
• v.45 no.3
• /
• pp.521-532
• /
• 2017

Purpose: The purpose of this study is to structure affective factors related to the tactile sense in order to improve tactile sensibility satisfaction of interior material. In this paper, we propose the design direction of interior material by analyzing the association between material properties and affective factors for automotive interior material. Methods: The relationship between sensibility adjectives and feelings related to tactile sensation were derived through factor analysis after touching prepared samples that were made by changing the material properties of automotive interior material. The association between affective factors and interior material properties were analyzed through ANOVA. Results: Seven kinds of visual and tactile affective factors were derived from the correlation between feeling of material and sensibility adjectives measured by 215 subjects. It is found that there is a quadratic relationship rather than a linear relationship through association analysis between affective factors and the material properties such as roughness, friction coefficient, and hardness. Conclusion: This study suggests the direction of the interior material design which can improve the sensibility satisfaction of the automobile customers by identifying the tactile factors related to the material properties of automotive interior material.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2003.11a
• /
• pp.21-22
• /
• 2003

여름철 더운환경과 냉방환경에서 안감소재별 6종의 원피스 드레스의 주관적 착용감을 평가한 결과, 안감소재에 따라 원피스 드레스의 주관적 착용감은 유의한 차이를 나타내어 고온환경에서는 레이온 안감이, 냉방환경에서는 아세테이트 안감의 착용감이 좋은 것으로 나타났다. 여름철 환경에서는 의복기후보다 주관적 착용감이 쾌적감에 더 큰 영향을 미치는 요인을 나타났다.

• Science of Emotion and Sensibility
• /
• v.21 no.2
• /
• pp.89-100
• /
• 2018

This study was performed to develop face towel fabrics that reflect consumer's tactile preferences. Three different kinds of pile fiber (100% cotton, 50% cotton/50% bamboo, 100% bamboo) of the towel fabrics were selected for the test. The towels were laundered one, five and 10 times repeatedly in a normal washing condition, and fabric softeners were applied to the towels that were laundered 10 times. The flexibility and absorbency (absorption rate and water absorptivity) were evaluated by laundering times of the face towels. Male and female university students evaluated their subjective sensations of the face towels. The flexibility of towel fabrics showed no significant difference according to type of pile fiber or laundering time. The absorbency of the towels was significantly different according to the type of pile fiber and laundering time. The absorption rate was higher in 100% bamboo fiber, and water absorptivity was higher for cotton fibers. There were no significant differences in subjective sensation according to the type of pile fiber of towels before laundering. As the frequency of laundering increased, the tactile preference for the towel slightly decreased. The 100% bamboo towel was rated the most comfortable among the three kinds of towels. The tactile preference for the towels was influenced by smoothness, fabric softness, and softener treatment, in that order.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.1
• /
• pp.116-126
• /
• 1998

This study was conducted to examine the effect of difference in materials of aerobic wear on both human body's physiological reactions and subjective wearing sensation by comparing and analysing not only cotton sparidex A, B and C but nylon spandex D, E and F used as actually wearing materials. The rectal temperature of type A and I remained at high degree, the type C was higher from after high-speed running but dropped sharply when taking a break finally. Both skin temperature and mean skin temperature dropped sharply due to sweat occurred during physical exercise, and then rose slowly when taking a break. Type A -D and B-I showed that the mean skin temperature remained at high degree when wearing a cotton spandex. Type C's temperature within its aerobic wear was lower than type F while its relative humidity was higher than type F. Wearing sensation showed a change similar to wearing, particularly, which was remarkable in type B-E. Also, it was shown that humidity sensation, tactile sensation and comfort sensation were good when wearing the cotton spandex.

• Journal of Korea Multimedia Society
• /
• v.14 no.1
• /
• pp.133-143
• /
• 2011

This paper proposes a mobile navigation system which haptically presents the way to go to visually impaired persons. In order to convey the tactile information to the visually impaired persons, we develop a new tactile module with a solenoid, a permanent magnet and an elastic spring. Furthermore, we suggest 2D vibration flow which originates from one point and gradually propagates to other points on a surface of the haptic navigation system. The tactile module and the vibration flow method are incorporated into the proposed haptic navigation system and they stimulate the user's finger pad and palm, respectively. We conduct experiments to investigate that the proposed navigation system haptically provides the direction to the users. From the experimental results, we verify that the proposed system can generate enough tactile sensation to guide the direction to go in real-time.

• Science of Emotion and Sensibility
• /
• v.10 no.1
• /
• pp.99-111
• /
• 2007

In order to identify tactile sensibility factors of traditional silk fabrics and to provide prediction models for the sensibility factors by mechanical properties, seventeen different traditional silk fabrics were evaluated in terms of both tactile sensation and sensibility by using a modified magnitude estimation line scale Gongdan and Newttong with lower values for surface roughness(SMD), bending rigidity(B), and compression resilience(RC) were rated as softer, smoother, fluffier, and more pliable in tactile sensation than any other traditional silk fabrics whereas Nobangju haying higher B, SMD, and tensile resilience(RT) was touched as crisper, more rustling, and springier. Three different tactile sensibility factors including 'Feminine', 'Natural', and 'Casual' were obtained significantly by grouping fifteen different tactile sensibility descriptors. In the prediction models sensibility 'Feminine' was explained positively by SMD, which was supported by the fact that both Gongdan and Newtton were perceived as more feminine. Sensibility 'Natural' that was felt stronger as for Myoungju and Sa was predicted negatively by both fabric thickness(T) and RT. Finally, RC, elongation at maximum load (EM), and T predicted sensibility 'Casual' negatively, which results in its higher factor scores for Myoungju and Shantung, respectively.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.8
• /
• pp.592-599
• /
• 2003

As one of the Principal modalities of human sensation, tactile feel is prerequisite for building wide variety of applications such as telemanipulation, virtual reality and medical engineering. A dynamic Braille display device based on a polymer actuator is presented. The actuator, often called artificial muscle actuator has advantageous features over the existing methods in terms of intrinsic softness, ease of fabrication, cost-effectiveness and miniaturization. The principles of actuation with dielectric elastomer is introduced, and necessary considerations on the design of a tactile display device are discussed. The design of the device is described in detail including the fabrication process and driving electronics. Also, preliminary results of experiments are given to evaluate its performance.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.1487-1488
• /
• 2013