• 제목/요약/키워드: Table scan

검색결과 70건 처리시간 0.023초

두부 CT 검사 시 테이블 높이에 따른 선량과 화질에 관한 연구 (A Study on Radiation Dose and Image Quality according to CT Table Height in Brain CT)

  • 김기원;오주영;민정환;이상선;이영봉;임경환;이윤
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제46권2호
    • /
    • pp.99-106
    • /
    • 2023
  • The height of the table should be considered important during computed tomography (CT) examination, but according to previous studies, not all radiology technologists set the table at the patient's center at the examination, which affects the exposure dose and image quality received by the patient. Therefore, this study intends to study the image quality exposure dose according to the height of the table to realize the optimal image quality and dose during the brain CT scan. The head phantom images were acquired using Philips Brilliance iCT 256. When the image was acquired, the table height was adjusted to 815, 865, 915, 965, 1015, and 1030 mm, respectively, and each scan was performed 3 times for each height. For the exposure dose measurement, optically stimulated luminescence dosimeter (OSLD) was attached to the front, side, eye, and thyroid gland of the head phantom. In the signal to noise ratio (SNR) measurement result, The SNR values for each table height were all lower than 915 mm. As a result of exposure dose, the exposure dose on each area increased as the table height decreased. The height of the table has a close relationship with the patient's radiation exposure dose in the CT scan.

전신 영상 검사 시행 시 테이블 이동속도의 정확성에 관한 연구 (The Accuracy of the Table Movement During a Whole Body Scan)

  • 이주영;정우영;정은미;동경래
    • 핵의학기술
    • /
    • 제13권3호
    • /
    • pp.86-91
    • /
    • 2009
  • 전신 영상 검사는 일반적인 핵의학 검사에 적용되고 있는 가장 기본적인 촬영 방법 중 하나이다. 이 때 각 검사마다 규정화된 테이블 이동 속도는 다양하다. 본 연구에서는 감마카메라의 사용 기간에 따른 노후 상태와 감마카메라 테이블 위의 무게 변화에 따른 테이블 이동 속도를 측정하여 그 정확성을 분석하는데 그 목적이 있다. 2008년 12월부터 2009년 2월까지 서울아산병원 핵의학과내에서 전신 영상 검사를 주로 시행하는 SIEMENS 장비 중 가장 사용기간이 긴 ECAM plus와 가장 최근에 설치된 SYMBIA T2를 대상으로 연구를 실시하였다. 각 장비별로 테이블 이동속도를 10, 15, 30 cm/min으로 나누어 매 10 cm씩 마다 총 100 cm의 구간을 타이머를 이용해 테이블 이동 시간을 측정하였다. 또한 표준 체중을 60~70 kg으로 감안하여 0, 66, 110 kg으로 나누어 체중에 따른 테이블의 이동 속도를 동일한 방법으로 측정하여 비교 분석하였다. 본 연구에서는 10 cm/min, 15 cm/min, 30 cm/min의 변동계수가 ECAM plus에서 1.23, 1.42, 2.02이었고, SYMBIA T2에서 1.23, 1.83, 2.28이었으며 테이블 이동속도가 증가될수록 변동은 많았다. 또한 무게 변화에 따른 각각의 변동계수는 0 kg에서 0.96, 1.45, 2.08이었고, 66 kg에서 1.32, 1.72, 2.27이며, 110 kg에서 1.37, 1.73, 2.14로 무게에 따른 큰 차이는 없었다. 95% 신뢰수준에서 통계적으로 유의한 차이는 있지 않아(p>0.05) 두 장비 모두 허용할 수 있는 범위안에 있었지만, ECAM plus에 비해 SYMBIA T2의 변동계수가 비교적 크게 측정되었다. 이러한 결과를 미루어 볼 때 Onco. Flash와 같은 Half-time 검사법을 실시하기 전에는 테이블의 이동과 테이블 이동 속도, 감마카메라의 상태를 점검하고, 좀 더 관심을 기울여야 하며 정기적인 점검을 일반화시키는 것이 유용할 것이라고 생각된다.

  • PDF

블록-순환으로 분배된 배열의 지역 주소 생성 (Generating Local Addresses for Block-Cyclic Distributed Array)

  • 권오영;김태근;한탁돈;양성봉;김신덕
    • 한국정보처리학회논문지
    • /
    • 제5권11호
    • /
    • pp.2835-2844
    • /
    • 1998
  • 대부분의 데이터 병렬 언어들은 배열을 분배하는 방법을 제공하고 있다. 이들 중 블록-순환(block-cyclic) 분배가 가장일반적인 데이터 방법이다. 블록-순환 형태로 분할된 배열 구간 A(l:h:s) 중 각 프로세서가 자신의 메모리 영역에서 접근하는 A의 지역주소를 컴파일러 또는 실시간 시스템들이 생성하는 방안에 대한 연구가 이루어지고 있다. 이 논문에서는 블록-순환 분배된 배열에 대한 두 가지 지역 주소 생성 방법을 제안한다. 하나는 가상-블록 (virtual-block)을 변형한 simple scan 방법이고, 다른 하나는 지역 메모리 접근에 대한 정보를 포함하는 ${\Delta}M$테이블을 선형시간에 생성하는 알고리즘이다. ${\Delta}M$테이블 생성과 각 프로세서가 10,000개의 지역배열 원소를 접근하는데 소요된 시간을 측정하는 실험을 하였다. 실험결과 simple scan 방법은 성능이 좋지 못하였다. 하지만 ${\Delta}M$테이블을 구성하는 다른 방법들 보다 빠른 시간에 수행이 완료되었다.

  • PDF

Categorical Data Analysis by Means of Echelon Analysis with Spatial Scan Statistics

  • Moon, Sung-Ho
    • Journal of the Korean Data and Information Science Society
    • /
    • 제15권1호
    • /
    • pp.83-94
    • /
    • 2004
  • In this study we analyze categorical data by means of spatial statistics and echelon analysis. To do this, we first determine the hierarchical structure of a given contingency table by using echelon dendrogram then, we detect candidates of hotspots given as the top echelon in the dendrogram. Next, we evaluate spatial scan statistics for the zones of significantly high or low rates based on the likelihood ratio. Finally, we detect hotspots of any size and shape based on spatial scan statistics.

  • PDF

단층촬영영상을 이용한 T.O.D Calibration의 정확성과 유용성에 관한 비교연구 (Comparative Study on Accuracy and Usefulness of Calibration Using CT T.O.D)

  • 서정범;김동현;이정범
    • 대한디지털의료영상학회논문지
    • /
    • 제13권1호
    • /
    • pp.39-48
    • /
    • 2011
  • Uses a Tomographic scan image and Table Object Distance(TOD) price after measuring, uses accuracy and usability of blood vessel diameter(Vessel Diameter) measurement under comparison evaluating boil TOD Calibration. The patient who enforces Prosecuting Attorney abdomen Tomographic scan in the object the superior mesentery artery uses PACS View from abdomen fault image and from blood vessel diameter and the table measures the height until of the blood vessel. Uses Angio Catheter from Angiography(5 Fr.) and enforces is measured from PACS View the height until of the table which and the blood vessel at TOD Calibration price and the size of the superior mesentery artery inputs measures an superior mesentery artery building skill. Catheter Calibration input Agnio Catheter where uses in Angiography the size of the superior mesentery artery at Catheter Calibration price and they measure. Produced an accuracy from monitoring data and comparison evaluated. The statistical program used SPSS. TOD Calibration accuracy was 96.53%, standard deviation is 0.03829. Catheter Calibration accuracy of 92.91%, standard deviation is 0.05085. Represents a statistically significant difference(p = 0). According to age and gender was not statistically significant(p > 0.05). TOD Calibration correlation coefficient R-squared of 88.8%, Catheter Calibration of the R-squared is 75.5%. High accuracy of both methods. Through this study, CT images using the measured distance between the table and the Object, TOD Calibration accuracy higher than two Catheter Calibration was measured. TOD and Catheter Calibration represents a statistically significant difference(p = 0).

  • PDF

영상 스케일러의 저전력 VLSI 구조 설계 및 계수 최적화 (Low-power VLSI Architecture Design for Image Scaler and Coefficients Optimization)

  • 한재영;이성원
    • 대한전자공학회논문지SD
    • /
    • 제47권6호
    • /
    • pp.22-34
    • /
    • 2010
  • 기존의 영상 스케일러(scaler)들은 연산량과 하드웨어 복잡도를 줄이기 위해 선형 보간과 같은 간단한 보간을 적용함으로써 화질을 희생시키거나, 고품질 영상을 얻기 위하여 복잡한 보간 기법을 적용함으로써 전력소모와 크기가 큰 하드웨어 구조를 적용하여 왔다. 그러나 영상기기들의 소형화와 고화질 영상에 대한 사용자들의 욕구 증대로 소형, 저전력이면서 결과 영상의 화질 또한 우수한 스케일러의 개발이 중요시되고 있다. 따라서 본 논문은 실시간, 고화질, 소형, 저전력의 목표를 모두 달성할 수 있는 래스터 스캔(raster scan) 방식의 스케일러 하드웨어 구조를 제안한다. 본 논문에서 제안하는 스케일러는 기존의 3차 보간(cubic interpolation) 기법과 룩업테이블(look-up table) 구조를 개선하여 저전력화와 소형화를 달성하였다. 제안하는 스케일러 구조의 특징은 기존의 실시간 스케일러가 포함하던 버퍼를 라인메모리로 대체하여 메모리 접근 횟수를 줄임으로써 저전력을 달성할 수 있도록 했다는 것이며, 또한 기존의 룩업테이블 구조에서 사용하던 3차 보간 수식을 재정리하여 곱셈기 수와 룩업테이블의 크기를 줄임으로써 하드웨어를 소형화하는 방법을 제안하였다. 마지막으로 사용되는 계수의 크기에 따른 결과를 분석하여 영상의 화질과 하드웨어 크기 간의 최적의 타협점을 제시하였다.

전산화 단층촬영시 주선속내 외의 주요장기 흡수선량 비교분석 (Comparative Analysis of Absorption Doses between Exposed and Unexposed Area on Major Organs During CT Scan)

  • 사정호;서태석;최보영;정규회
    • 한국의학물리학회지:의학물리
    • /
    • 제11권1호
    • /
    • pp.59-71
    • /
    • 2000
  • CT검사시 선량이 각 장기에 미치는 영향을 관찰 하고자 하였으며, 선정한 3부위(뇌, 흉부, 복부) 스캔에서 주 선속 및 주 선속외에 미치는 흡수선량을 측정 제시하고, 자궁에 영향을 주는 부위 스캔을 명확히 알고자 하였다. CT기계(Somatom plus 4, Siemens co, Germany)를 이용하였으며 인체에 조직등가 물질이 비슷한 Alderson Rando phantom (Alderson Reserch Laboratories, USA)과 Harshaw chemical 사에서 제작된 열형광선량계 Thermoluminescent dosimeter (TLD)-100 과 Reader와 Oven을 이용하였다. TLD 교정시에, 6MV 선형가속기와 $30{\times}30{\times}1.5$cm의 정사각형 고체 물팬텀을 사용하였다. TLD를 팬텀의 목적장기에 삽입시키기 위하여, 여성환자 (20세~40세) 40명의 영상을 이용하였으며, 위치 측정부위는 간, 위장, 비장, 신장, 대장, 방광, 자궁을 대상으로 하였다. Brain에서의 흡수선량 분포도에서 8 : 8(피치1) 에서는 비장까지 흡수선량이 측정되었으며 10 : 10 에서는 유방까지 흡수선량이 측정되었다. 흥부(Chest)에서의 흡수선량 분포도에서 8 : 8(피치1)에서의 주 선속 흡수선량이 높았다. Abdomen의 흡수선량 분포도에서 8 : 8 과 8 : 10의 스캔을 했을 때 주 선속 부위에서는 테이블 이동이 느린 8mm에서 흡수선량이 높게 나타났다. 뇌 CT의8 : 8과 10 : 10에서 자궁에 미치는 선량은 모두 없었으며, 몸 전체에 미치는 유효선량은 10 : 10 약간 높게 나타났다. Brain CT 에서 임산부나 임신가능 여성에게는 본 논문에서 확인된 방법으로 절편 두께를 8mm-10mm범위로 적용하는 것이 바람직 하고, Chest scan에서 8 : 10(피치 1.2)방법을 선택하는 것이 좋으며, 임산부나 임신 가능 환자에게는 10 : 15(피치 1.5)를 사용하는 것이 좋은 것으로 사료된다. Abdomen scan에서 유효선량이 10.707 mSv, MSAD가 7.2인 8 : 10을 택하는 것이 주 선속에 미치는 영향뿐만 아니라 생식선 장기인 Uterus에 미치는 영향이 비교적 적게 나타나, 다른 기법보다 다소 환자에게 적게 영향을 주며 검사 할 수 있다고 사료된다.

  • PDF

I-131 전신 스캔을 위한 Transmission Scan Tool 제작과 활용 (The Fabricating and Utilizing of the Transmission Scan Tool for I-131 Whole Body Scan)

  • 신채호;표성재;김봉수;조용귀;조진우;김창호
    • 핵의학기술
    • /
    • 제13권1호
    • /
    • pp.40-46
    • /
    • 2009
  • 목적 : 분화된 갑상선암 환자에서 방사성옥소(I-131)를 이용한 전신스캔은 보통 수술 후 잔여 갑상선 조직, 재발된 병변 부위 또는 전이 병소 등을 찾는데 유용한 방법이다. 최근 고선량 방사성동위원소를 이용한 치료는 증가 추세에 있으며, 동위원소 치료를 위한 입원대기는 수개월씩 지연되고 있다. 본원에서는 정화조 설비를 확장하여 주당 치료 가능 인원이 증가되었고 이로 인해 I-131 전신스캔 환자가 늘어나면서 검사시간 또한 증가되었다. 이를 개선하기 위해 본 연구에서는 기존의 검사시간을 단축하면서 병소의 위치를 정확하게 구별할 수 있도록 Transmission scan tool을 제작하여 우수한 분해능을 가진 전신영상을 얻고자 한다. 실험재료 및 방법 : 2008년 2월부터 7월까지 본과를 내원하고 ORBITER Gamma Camera를 이용하여 I-131 전신스캔을 시행하는 환자를 대상으로 하였다. 먼저 전신 스캔을 시행한 후 Transmission scan를 위해 검사 Table에 Rail을 설치하고 $^{99m}Tc$-pertechnetate 2 mCi를 희석한 Flood phantom을 올려놓을 수 있는 Tool을 자체 제작하여 Transmission image를 얻어 전신 스캔에 Fusion 하였다. 결과 : I-131 전신스캔과 Transmission scan의 Fusion된 영상은 간단한 marking을 통하여 구강이나 침샘부위, neck 부위의 병소, 전이병소의 위치를 감별하는데 우수한 분해능을 가진다. 또한 추가적인 국소 영상이 불필요하여 8~28분 정도의 검사 소요시간을 단축할 수 있었다. 결론 및 고찰 : I-131 전신스캔에서 Transmission scan은 방사능의 감약을 통하여 체표면의 윤곽을 정확히 나타낼 수 있으며 미리 시행한 I-131 전신스캔과의 Fusion 영상을 통하여 분해능을 향상시킴으로서 잔여 갑상선 조직이나 전이병소 등의 위치를 나타내는데 유용하다. 또한 추가적인 국소영상 촬영이 불필요함에 따라 검사에 소요되는 시간을 단축할 수 있고, 체표면 윤곽을 나타내어 해부학적 위치를 파악하는데 도움을 줄 수 있는 다른 임상검사에도 확대 적용할 수 있을 것이다.

  • PDF

간경변증(肝硬變症)에 있어서 교질형방사성금(膠質形放射性金)($^{198}Au$)을 사용(使用)한 간(肝)스켄과 간기능(肝機能)과의 관계(關係)에 관(關)한 임상연구(臨床硏究) (A Clinical Study on Liver Scanning using Colloidal Radiogold and Liver Function in Cirrhosis of the Liver)

  • 고창순;이종헌;장고창;이영;민영일;홍창기
    • 대한핵의학회지
    • /
    • 제3권1호
    • /
    • pp.59-67
    • /
    • 1969
  • Correlation between the blood clearance half time and findings of liver scan using the colloidal radiogold in patients of liver cirrhosis is observed through the scoring system, in which the more changes in size, shape and density in the liver scan, the more points are given (table 1). Results: 1) Within the increase in severity of hepatocellular dysfunction in liver cirrhosis, the degree and frequency of following changes in liver scan (done with colloidal radiogold) were increased in order. a) generalized hepatomegaly b) enlargement of the left lobe & reduction of the right lobe c) relatively increased radiodensity in the left lobe and 4) visualization of spleen. 2) Frequency of the normal scan in liver cirrhosis was $12{\pm}3.56%$, frequency of normal value in blood clearance half time of the radiogold was $5.0{\pm}2.34%$ and frequency of normal scan & normal blood clearance rate in liver cirrhosis was $3.6{\pm}2.06%$.

  • PDF

An Internal Pattern Run-Length Methodology for Slice Encoding

  • Lee, Lung-Jen;Tseng, Wang-Dauh;Lin, Rung-Bin
    • ETRI Journal
    • /
    • 제33권3호
    • /
    • pp.374-381
    • /
    • 2011
  • A simple and effective compression method is proposed for multiple-scan testing. For a given test set, each test pattern is compressed from the view of slices. An encoding table exploiting seven types of frequently-occurring pattern is used. Compression is then achieved by mapping slice data into codewords. The decompression logic is small and easy to implement. It is also applicable to schemes adopting a single-scan chain. Experimental results show this method can achieve good compression effect.