• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1B
• /
• pp.27-34
• /
• 2010

As VoIP systems move to wireless environments with much higher average packet loss rates than wired networks, it becomes less possible for the network to assure a reasonable QoS. So, real-time quality monitoring for mobile VoIP applications is an important issue to be explored. In this paper, we explore perceptual quality dependency on two parameters: the burst loss rate and average burst length. Also, we propose a simple 'moving average' approach with $\alpha$ aiming to measure those parameters on real-time basis. In order to find how accurately the two parameters measured estimate the real perceptual quality, we compare actual measured PESQ scores with estimated value by matching the measured quality metric to the trained MOS table. Finally, we propose the quality-based accounting system, which can set obvious continuities between quality and billing.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.8
• /
• pp.554-561
• /
• 2004

As the technologies of semiconductor and multimedia communication have been improved. the high-quality video and the multi-channel audio have been highlighted. MPEG Audio Layer 3 decoder has been implemented as a Processor using a standard. Since the synthesis filter of MPEG-1 Audio Layer 3 decoder requires the most outstanding operation in the entire decoder. the synthesis filter that can reduce the amount of operation is needed for the design of the high-speed processor. Therefore, in this paper, the synthesis filter. the most important part of MPEG Audio, is materialized in FPGA using the method of DAULT (distributed arithemetic look-up table). For the design of high-speed synthesis filter, the DAULT method is used instead of a multiplier and a Pipeline structure is used. The Performance improvement by 30% is obtained by additionally making the result of multiplication of data with cosine function into the table. All hardware design of this Paper are described using VHDL (VHIC Hardware Description Language) Active-HDL 6.1 of ALDEC is used for VHDL simulation and Synplify Pro 7.2V is used for Model-sim and synthesis. The corresponding library is materialized by XC4013E and XC4020EX. XC4052XL of XILINX and XACT M1.4 is used for P&R tool. The materialized processor operates from 20MHz to 70MHz.

• The Journal of the Korea Contents Association
• /
• v.12 no.7
• /
• pp.346-357
• /
• 2012

This study classified the various quality features of coffee shop by Kano model with customers' perspective. Also both satisfaction coefficient and dissatisfaction coefficient are calculated to analyse the relative influence of quality features on customer satisfaction. This study also dragged the potential customer satisfaction improvement index to scrutinize the quality improvement possibility for coffee shops. The analysis results showed that low price, luxurious interior, restfulness of table and chair, usability of wireless internet are belonged to the Attractive quality. On the other hand, cleanliness and hygiene, quality to price are identified as the One-dimensional quality. The current satisfaction level for both 'Caffe Bene' and 'Starbucks' are measured to draw the potential customer satisfaction improvement index. The result showed that low price and quality to price appeared to be the highest in its quality improvement possibility. The findings of this study help understanding the quality features to focus on and strengthening the competitiveness for coffee shops.

• Clinical and Experimental Reproductive Medicine
• /
• v.8 no.2
• /
• pp.45-55
• /
• 1981

Clomiphene citrate. antiestrogen, was given to 39 infertile males whose spermatogenesis were disturbed and the efficacy of the drug was evaluated at the Department of Urology in 1980. (Table 1). Patients were divided into 3 clinical observation groups such as group I composed of 19 cases of idiopathic azoospermia, group II consisted of 15 cases of oligospermia following the vasovasostomy, and group III comprised 5 cases of testicular azoospermia. (Table 2). Clinical characteristics of these patients were as follows: Age of the patients ranged from 26 to 43 years old with mean of 34, and that of their wives ranged from 24 to 41 years old with mean of 31. Duration of marital life ranged from 1 to 21 years with mean of 5 years. Sizes of testis ranged from 6 to 25 ml with mean of 16 ml. Coital frequency ranged from 0.5 to 6 per week with mean of 2.4 per week. Levels of plasma FSH ranged from 3.15 to 23.06 lU/1 with mean of 8.15 lU/1, those of LH ranged from 2.98 to 19.89 lU/1 with mean of 8.18 lU/1 and those of testosterone ranged from 3.09 to 9.97 ng/ml with mean of 6.48 ng/ml. (Table 3). Clomiphene citrate was given in dosage of 50 mg per day (in d.) orally to 31 patients for 3 to 9 months and in dosage of 100 mg per day (b.i.d.) orally to 8 patients for 3 to 9 months. (Table 8). Semen samples were analysed monthly on each patient by routine analysis techniques. For the assessment of the efficacy of Clomiphene citrate on faulty spermatogenesis following empirical criteria were used: For semen quality: Improvement (I) represents that semen parameter increased more than 25% from basal level after the treatment, Unchange (U) expresses that semen parameter increased less than 25% of basal level or not changed after the treatment and Deterioration (D) means that semen parameter decreased from basal level after the treatment. For fertility unit (total counts ${\times}$ motility ${\times}$ morphology ${\div}10^6$): Improvement (I) represents that fertility unit increased more than 10 units after the treatment, Unchange (U) expresses that fertility unit increased less than 10 units or not changed after the treatment, and Deterioration (D) means that fertility unit decreased after the treatment. (Table 4). Results obtained from the Clomiphene therapy were as follows: Changes of spermiograme before and after the Oomiphene therapy shown in the Table 5. Sperm counts increased from 23 to 31 ${\times}10^6$/ml in group I, from 17 to 29 ${\times}10^6$/ml in group II. Other parameters of spermiogramme were not changed significantly after the treatment. Fertility units increased from 14 to 18 units after the treatment in group I, and from 16 to 18 units after the treatment in group II. Effectiveness of Clomiphene citrate on spermatogenesis was summarised in the Tables 6 and 7. After the treatment, sperm count increased in 11 patients, motility increased in 6 patients, morphology increased in 4 patients and fertility units increased in 9 patients. No sperm could be produced by Clomiphene citrate in group III of testicular azoospermia. Dosage of 50 mg of Clomiphene citrate per day for 3 to 6 months was proved to be the most effective in the present series. (Table 8). Pregnancy occurred in 2 patients after the treatment. No particular side effects were noted by the treatment. Pharmacologic compounds used for male infertility were shown in the Table 9. Reported results of Clomiphene citrate were shown in the Table 10.

• Journal of the Korean Dietetic Association
• /
• v.11 no.1
• /
• pp.95-104
• /
• 2005

Customer satisfaction concerning foodservice quality characteristics were evaluated by using importance performance analysis(IPA) techniques in middle school foodsevice operations. One hundred students from each of 17 middle schools in Gangwon province were surveyed by self-developed questionnaire. Total of 1,675 questionnaires(female 943 and male 732 respectively) were collected and data were analyzed using SAS program. The results of this study are summarized as follows: 1.The male and female students scored the importance level as 3.99 and 4.03 out of 5 respectively, which means 'important' The performance level of female(2.71) was significantly lower than male(2.86) which means 'between bad and so-so'. it is suggested that the statistical analysis should be conducted respectively according to gender. And there is no performance level over 4(good). 2. Dissatisfied quality attributes identified were convenience of dinning room and the managerial attitude of dissatisfaction in the female and male students. 3. Satisfied quality attributes identified were hygiene of food and dinning room and spoon and cup and drinking water table and distribution process, taste of food, variety of food in the female and male students. 4. The performance scores of lower price(less than 1500 won) lunch group was higher than higher price(more than 1800 won) lunch group in the female and male students.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.4
• /
• pp.521-528
• /
• 2010

A product system will be improved continually until requirements are satisfied. It is true that considering alternative designs to improve product system is hard work; it is also true that selecting an adequate design idea that represents the needs of stakeholders concerned and meets effectiveness factors properly is not an easy work, either. In the process of driv-ing an idea and designing, which is called Design Phase, there are lots of existing tools for testing the driven idea in DFSS. But, those kinds of tools do not offer the function that helps to select the technically better design idea among alternative design ideas that have the same evaluation level. Moreover it is inappropriate to select adequate alternative design ideas by just verifying only the evaluation table in pugh matrix, since satisfied deviation val-ues are low when there is a too competitive mass product system in a market. Also, for the IT product with short life cycle, faster and more effective testing tool is needed. Therefore, the 'roduct quality index' is suggested in order to select an appropriate candidate design concept for system development that meets requirements by using 'deality concept' pro-vided by TRIZ. According to the result of this research, it is possible to select technically better idea fast and effectively; it is confirmed by applying the approach to the case of LCD BLU (Back Light Unit).

• Korean Journal of Community Nutrition
• /
• v.15 no.3
• /
• pp.369-378
• /
• 2010

School lunch programs at middle schools have increased in quantity. However, the quality of them is in fact not enough to reach the satisfactory standard, especially in the aspect of environment of school meals. It is true that there seems to be little attention to the environment. In this study, degree of satisfaction about school lunch program was surveyed for students in one middle school. Focus of survey was sanitary condition about the dining room and classroom where they have lunch. First, in order to investigate the degree of satisfaction about their dining place, questionnaire was sent out to the students at one middle school in Seoul. Questionnaire was made with reference to previous research. Second, for the study on environmental sanitation, dropping bacteria (general bacteria) is measured in three parts of dining place (entrance, serving table, dining table). Petriplate film was exposed to the responsible places for 15 minutes and then cultivated at the temperature of $32^{\circ}C$ for 48 hours before counting the number of bacteria formed. For the statistical analysis, SPSS 12.0 was used. The results of the study show that students had more satisfaction in dining room service than in classroom service. Important factors for the meal program such as "taste of food", "amount of food per student", "state of keeping warm", "appearance of food", "diversity of menu", and "kindliness of feeding staff" had more points in dining room than in classroom. For the environmental and sanitary aspect, the result of dropping bacteria (general bacteria) in dining room and classroom showed that table (5.00) and fooddistribution corner (8.67) of dining room were cleaner than those of classroom (P < 0.05). Making a good environment for school feeding will have a positive effect on the improvement of satisfaction and sanitation of school feeding. There should be expansion of dining room service for the students.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.17 no.3
• /
• pp.162-173
• /
• 1997

Automatic on-line surface inspection systems have been applied for monitoring a quality of steel strip surfaces. One of the important issues in this application is the performance of on-line defect classifiers. Rule-based classification table methods which are conventionally used for this purpose have been suffered from their low performances. In this work, probabilistic neural networks and the enhanced classification tables which are newly proposed here are applied as alternative on-line classifiers to identify types of surface defects on cold rolled strips. Probabilistic neural networks have shown very excellent performance for classification of surface defects.

• Health Policy and Management
• /
• v.25 no.2
• /
• pp.67-70
• /
• 2015

To establish an appropriate policy for robotic surgery in Korea, the National Evidence-based Collaborating Agency (NECA) and the Korean Society of Health Policy and Administration held a round-table conference (RTC) to gather opinions through a comprehensive discussion of scientific information in gastric cancer. The NECA RTC is a public discussion forum wherein experts from diverse fields and members of the lay public conduct in-depth discussions on a selected social issue in the health and medical field. For this study, representatives from the medical field, patient groups, industry, the press, and policy makers participated in a discussion focused on the medical and scientific evidence for the use of robotic surgery in gastric cancer. According to the RTC results, robotic surgery showed more favorable results in safety and efficacy than open surgery and it is similar to laparoscopy. When the cost-effectiveness of robotic surgery and laparoscopy is compared, robotic surgery costs are higher but there was no difference between the two of them in terms of effectiveness (pain, quality of life, complications, etc.). In order to resolve the high cost issue of the robotic surgery, a proper policy should be implemented to facilitate the development of a cost-effective model of the robotic surgery equipment. The higher cost of robotic surgery require more evidence of its safety and efficacy as well as the cost-effectiveness issues of this method. Discussions on the national insurance coverage of robotic surgery seems to be necessary in the near future.

• The KIPS Transactions:PartC
• /
• v.16C no.1
• /
• pp.101-108
• /
• 2009

The data broadcasting service, which is growing remarkably today, provides viewers with useful information as well as high quality video and audio. Service information is a kind of additional data that contains a wide range of information such as channel list and/or program title. Each service information is transmitted in the form of a table. And most standard committees have specified their own table list used for carrying the service information. Consequently, It causes incompatibility among services that each broadcast operators produce because the tables that they use differ from each other. In this paper, we propose a general-purpose service information processing system for an integrated data broadcasting middleware that is compatible with heterogenous broadcasting environments. The system is able to change its target table list dynamically without any code modification. Futhermore, we also adopted a thread pool model for efficient parsing and event dispatching.