• The KIPS Transactions:PartC
• /
• v.15C no.1
• /
• pp.31-36
• /
• 2008

The clock frequency difference of sensor nodes is one of main parameters in TOF estimation and affect to degrade ranging algorithms to estimate positions of mobile nodes in wireless sensor networks. The specification of IEEE802.15.4a describes asynchronous TWR and SDS-TWR insensitive to frequency difference without any additional network synchronization. But the TWR and SDS-TWR can not eliminate sufficiently the effect of frequency difference of node pair, packet processing delay and its difference. Especially use of low cost oscillator with wide range offset, sensor node with different hardware and software can make the positioning errors worse. We propose an estimation method of frequency differences, and apply the measured frequency differences to TWR and SDS-TWR. We evaluate the performance of the proposed algorithm with simulation, and make certain that the proposed method enhances the performance of existing algorithms with positioning errors less than 25 cm.

• Journal of the Korean Society of Industry Convergence
• /
• v.19 no.3
• /
• pp.133-143
• /
• 2016

The objective in here is to find the density, stiffness, and strength of truss-wall rectangular (TWR) model which is combined with lattice truss (MLT) inside space. The TWR unit-cell model is defined as a unit cell originated from a solid-wall rectangular (SWR) model and it has an empty space inside. Thus, the empty space inside of the TWR is filled with lattice truss model defined as TWR-MLT. The ideal solutions derived of TWR-MLT are based on TWR with MLT model and it has developed by Gibson-Ashby's theory. To validate the ideal solutions of the TWR-MLT, ABAQUS software is applied to predict the density, strength, and stiffness, and then each of them are compared with the Gibson-Ashby's ideal solution as a log-log scale. Applied material property is stainless steel 304 because of cost effectiveness and easy to get around. For the analysis, SWR and TWR-MLT models are 1mm, 2mm, and 3mm truss diameter separately within a fixed 20mm opening width. In conclusion, the relative Young's modulus and relative yield strength of the TWR-MLT unit model is reasonably matched to the ideal expectations of the Gibson-Ashby's theory. In nearby future, TWR-MLT model can be verified by advanced technologies such as 3D printing skills.t.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.3
• /
• pp.914-919
• /
• 2010

It is confirmed that as the distance measurements accuracy of the SDS-TWR(Symmetric Double-Sided Two-Way Ranging) based on CSS(Chirp Spread Spectrum) is considerably degraded due to frequency interference and it causes to severe errors in the localization applications. In this paper, the compensation algorithm based on error rate offset of distance measurement ($CA_d$) is proposed for the purpose to reduce the ranging errors due to by the SDS-TWR ranging problems. The $CA_d$ measures the distance values between two nodes by means of 1m interval about 1~25m distances in the SDS-TWR, and compensates the distance values using the parameters related to the distance compensation. From the experiments, it is analyzed that the $CA_d$. have reduced the distance error to average 95cm and maximum 526cm, and the distance error by the $CA_d$ was below about 60cm in the 25m distances. In particular, the performance of the distance measurements accuracy by the $CA_d$ is very high in LOS(Line Of Sight) environments.

• The Journal of the Korea Contents Association
• /
• v.9 no.7
• /
• pp.76-85
• /
• 2009

UWB signal with high resolution capability can be used to estimate ranging and positioning in wireless personal area network. The node works on its local clock and the frequency differences of nodes have serious affects on ranging algorithms estimating locations of mobile nodes. The low rate UWB, IEEE802.15.4a, describes asynchronous two way ranging methods such as TWR and SDS-TWR working without any additional network synchronization, but the algorithms can not eliminate the effect of clock frequency differences. Therefore, the mechanisms to characterize the crystal difference is essential in typical UWB PHY implementations. In high rate UWB, characterizing of crystal offset with tracking loop is not required. But, detection of the clock frequency offset between the local clock and remote clock can be performed if there is little noise induced jitter. In this paper, we complete related ranging equations of high rate UWB based on TWR with relative frequency offset, and analyze a residual error in the ideal equations. We also evaluate the performance of the relative frequency offset algorithm by simulation and analyze the ranging errors according to the number of TWR to compensate coarse clock resolution. The results show that the relative frequency offset compensation and many times of TWR enhance the performance to converge to a limited ranging errors even with coarse clock resolutions.

• Journal of Navigation and Port Research
• /
• v.41 no.3
• /
• pp.87-92
• /
• 2017

To enhance the reliability and/or resilience of the PNT service included in the e-Navigation strategy of the IMO, the evaluation of the AIS-TWR method for the asynchronous R-mode for maritime service, which is available even in the absence of the GNSS, is described. For the AIS-TWR, which is capable of ranging through message exchange even without high precision synchronization, the operation scenario and the error factors according to the AIS system specifications are proposed and analyzed. Cramer-Rao Lower Bound is presented for the performance evaluation of the AIS-TWR algorithm. A simulation by AIS-TWR method of two AIS systems in a 3 km static environment shows estimation error of about 41m compared to the real value..

• ETRI Journal
• /
• v.35 no.3
• /
• pp.361-370
• /
• 2013

In this paper, a packet-reduced ranging method using a superresolution time of arrival estimation algorithm for a chirp-based real-time locating system is presented. A variety of ranging methods, such as symmetric double-sided two-way ranging (SDS-TWR), have been proposed to remove the time drift due to the frequency offset using extra ranging packets. Our proposed method can perform robust ranging against the frequency offset using only two ranging packets while maintaining almost the same ranging accuracy as them. To verify the effectiveness of our proposed algorithm, the error performance of our proposed ranging method is analyzed and compared with others. The total ranging performance of TWR, SDS-TWR, and our proposed TWR are analyzed and verified through simulations in additive white Gaussian noise and multipath channels in the presence of the frequency offset.

• Journal of Engineering Education Research
• /
• v.13 no.5
• /
• pp.76-80
• /
• 2010

In this paper, the Location Compensation Mechanism using equivalent distance rate ($LCM_{edr}$) for localization system based on SDS-TWR (Symmetric Double-Sided Two-Way Ranging) in wireless sensor network is proposed. The performance of the mechanism is experimented in terms of two types of the localization tracking scenarios of indoor and outdoor environments in university campus. From the experimentations, the compensation ratio in the $LCM_{edr}$ is better than that in SDS-TWR about 90% in indoor/outdoor environments in scenario 1 but also is better than that of SDS-TWR about 91.7% in indoor environment and about 100% in outdoor environment in scenario 2 respectively.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.5
• /
• pp.1944-1956
• /
• 2021

This paper considers a cellular two-way relay network with one base station (BS), one relay station (RS), and two users. The two users are far from the BS and no direct links exist, and the two users exchange messages with the BS via the RS. A non-orthogonal multiple access (NOMA) and network coding (NC)-based decode-and-forward (DF) two-way relaying (TWR) scheme TWR-NOMA-NC is proposed, which is able to reduce the number of channel-uses to three from four in conventional time-division multiple access (TDMA) based TWR approaches. The achievable sum-rate performance of the proposed approach is analyzed, and a closed-form expression for the sum-rate upper bound is derived. Numerical results show that the analytical sum-rate upper bound is tight, and the proposed TWR-NOMA-NC scheme significantly outperforms the TDMA-based TWR and NOMA-based one-way relaying counterparts.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.2
• /
• pp.125-130
• /
• 2013

Compared to OWR (One-Way Ranging) method that requires precise network time synchronization, TWR (Two-Way Ranging) method has advantages in building an indoor WPAN (Wireless Personal Area Network) location system with lower cost. However, clock offsets of nodes in WPAN system should be eliminated or compensated to improve location accuracy of the TWR method. Because conventional clock offset elimination methods requires multiple TWR transactions to reduce clock offset, they produce network traffic burden instead. This paper presents a clock offset estimation method that can reduce clock offset error with a single TWR transaction. After relative clock offsets of sensor nodes are estimated, clock offsets of mobile tags are estimated using a single TWR communication. Simulation results show that location accuracy of the proposed method is almost similar to the conventional clock offset elimination method, while its network traffic is about a half of the conventional method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.4
• /
• pp.1248-1253
• /
• 2010

In this paper, the compensation algorithm for localization using the concept of equivalent distance rate(AEDR) in order to compensate ranging error in the SDS-TWR(Symmetric Double-Sided Two-Way Ranging) is proposed and the performance of the proposed algorithm is analyzed by the localization experiments. The ranging error of the SDS-TWR in the distance between mobile node and beacon node is measured to average 1m~8m by ranging experiments. But it is confirmed that the performance of the localization by the AEDR is better than that of the SDS-TWR 4 times in university auditorium and corridor, and the localization error of above 3~10m is reduced to average 2m and that of below 3m is reduced to average 1m respectively. It is concluded that the AEDR is superior to the NLOS(Non Line Of Sight) than LOS(Line Of Sight) in performance of ranging compensation for localization, and the AEDR is more helpful to localization systems practically considering the environment of sensor networks is under NLOS.