• 한국산업보건학회지
• /
• 제26권1호
• /
• pp.20-29
• /
• 2016

Objectives: The purpose of this study is to simplify and standardize analytical method of polar solvents(methanol, isopropanol, n-butanol, acetone, methylene chloride and MIBK) in the working environmental by GC. Because NIOSH methods are various and complicated. Methods: The method is using the same stationary phase(5% phenyl 95% dimethylpolysiloxane), absorbent(silica gel) and desorption solvent(DMSO) for above 6 solvents. For the 6 solvents desorption efficiency, calibration curve, and limit of detection were studied Results: As the results, 6 solvents{2 groups ; first group(methanol/isopropanol/butanol) and second group(acetone/methylene chloride/MIBK)} could be separated and quantified within 10 minutes. Desorption efficiency from silica gell of 6 solvents using dimethylsulfoxide(DMSO) was methanol 86.2%, isopropanol 103.2%, n-butanol 101.8%, acetone 98.2%, methylene chloride 103.9% and MIBK 106.2% in the range of 0.2, 0.5, 2.0 times of TWA, consequently, satisfied NIOSH estimation level(beyond 75%). Correlation coefficient(r)in the range of 0.2~2.0 times of TWA, was above 0.999 for 6 solvent. LOD(mg/DMSO ml) using calibration curve in the range of 0.2~2 times of TWA was methanol 0.11, isopropyl alcohol 0.20, n-butanol 0.03, acetone 0.50, methylene chloride 0.05, MIBK 0.04 respectably. Conclusions: This method can be used at the sampling and analytical method for polar solvents by GC. Also, will be able to be applied with NIOSH methods.

• 한국산업보건학회지
• /
• 제5권1호
• /
• pp.68-86
• /
• 1995

This study was conducted at five Ethylene Oxide(EO) sterilizing processes in hospitals located in Seoul from August 8 to August 30, 1994. The main purposes of this study were to assess the TWA(Time Weighted Average) and short term exposures to EO and to evaluate factors affecting EO concentrations in sterilizing room. Results are summarized as follows. 1. The TWA concentrations of the sterilizing operators ranged from <0.005ppm to 3.04ppm and those of two sterilizing rooms out of five exceeded 1ppm, the Korean and ACGIH standards. 2. When the door of the sterilizer is opened at the end of the sterilization cycle, the short term concentrations of operators ranged from <0.005ppm to 11.4ppm, and those of three sterilizing room out of five exceeded 5ppm, the ACGIH short term exposure limit(STEL). The short term concentrations of area samples ranged from 0.24ppm to 49.2ppm and those of four sterilizing room out of five exceeded 5ppm. 3. Factors affecting EO exposure level were aeration type, the location of storage site for sterilized item, amount of gas, use period of sterilizer(p<0.005). 4. Following recommendations are suggested to minimize exposure to EO. The use of EO gas should be reduced by using another available sterilization methods, and the sterilizers and gas tank storage site should be isolated from, other work areas. Combination of local and general ventilation system should be installed. Metal carts or baskets for sterilization load should be used, and work environment and medical monitoring should be performed regularly.

• 한국가스학회지
• /
• 제19권3호
• /
• pp.1-8
• /
• 2015

본 연구는 신발, 타이어, 접착제 제조에 많이 사용되는 클로로프렌(chloroprene)에 대해 취급근로자의 건강장해 예방을 위해 유해성을 조사하고, 취급사업장에 대해 작업환경을 측정 노출농도 및 용량반응을 통해 위험성을 평가하였다. 클로로프렌은 국제암연구소(IARC)로부터 발암추정물질(2B), 표적장기 전신독성 및 생식독성물질로 국내 취급 사업장은 27개소, 연간 약 1,300톤이 사용되었으며, 노출 위험성은 노출환경에 따라 Monte-carlo simulation을 이용하여 산출하였다. 그 결과 국소배기장치가 없으며 1일 4시간 초과 작업시 발암을 일으킬 수 있는 위험성의 평균값은 26,404로, 국소배기장치가 있으며 15분 미만의 단시간 작업 경우 2,199에 비교해 매우 높은 위험성을 보였다. 그리고 표적장기 전신독성의 경우도 169.06으로 단시간 작업 경우 4.10에 비교해 표적장기 전신독성 발생 위험이 높은 것으로 평가되어 물질의 노출시간 및 환기방식에 깊은 상관관계가 있는 것으로 나타났다. 따라서 클로로프렌 노출에 의한 근로자의 건강장해 예방하기 위해 국소배기장치의 가동과 방독마스크의 착용 등 노출저감을 위한 작업환경 관리의 필요성이 있었다. 특히 클로로프렌은 발암성, 생식독성 물질로 미국 산업안전보건청(OSHA)에서는 TWA를 5 ppm($18mg/m^3$) 이하로 관리하고 있으며, 본 유해성조사 결과에서도 현행 노출기준 10 ppm이하에서 표적장기독성, 생식기 장해 등 생체에 미치는 영향이 있는 것으로 나타나 있어, 위험성이 강하게 예측되므로 현재 사용하고 있는 우리나라 작업환경 노출기준(TWA 10 ppm)도 5 ppm 수준으로 강화하여 근로자 건강장해 예방에 기여할 필요성이 있는 것으로 판단되었다.

• 한국산업보건학회지
• /
• 제15권1호
• /
• pp.19-26
• /
• 2005

In previous report, we presented that petroleum based solvents used in dry cleaning shop was almost similar to stoddard solvent defined by ACGIH and NIOSH, and the occupational exposure standard of stoddard solvent could be used in total exposure assessment of those solvents. The specific aim of the this study was to evaluate of the solvent exposure used in commercial dry cleaning shops by using occupational exposure standard of stoddard solvent. We conducted first survey of 8 self-employed dry cleaning shops and 5 factory type dry cleaning shops from July to August, and second survey of the same shops from October to November in 2002. The exposure concentration to the solvent during loading and unloading activity of vented dry cleaning machine was 489.2ppm(GM), 270.3ppm(GM), respectively, which was almost excursion limit(500ppm) of ACGIH, and exceed the ceiling limit(312ppm) of NIOSH. The time-weighted average (TWA) worker exposure to the solvent was 21.3ppm(GM) at self-employed shops, 20.7ppm(GM) at factory type shops on first survey, and 31.1ppm(GM), 33.7ppm(GM), respectively on second survey. The TWA exposure concentration of workers with spotting and cleaning machine operating job was 25.4ppm(GM), which was 2.9 times higher than the TWA exposure concentration, 8.8ppm(GM) of press workers. All TWA exposure concentrations was lower than OEL(100ppm) of stoddard solvent. We found that the most heavy exposure process at dry cleaning was loading, unloading process, and the vent of dry cleaning machine was the main emission source for workers exposure to petroleum based solvent.

• 한국구조물진단유지관리공학회 논문집
• /
• 제23권4호
• /
• pp.152-158
• /
• 2019

주차장 바닥재로 많이 사용되는 A사 에폭시 코팅제와 B사 바닥코팅제(A, B type)에 대하여 GC/MS(Gaschromatography/Mass spectrometer)를 이용하여 제품별로 함유하고 있는 휘발성유기화합물(VOCs)의 종류와 함량을 측정해보고, 휘발성유기화합물(VOCs)중 작업자나 입주자들에게 유해한 폼알데하이드(Formaldehyde), 톨루엔(Toluene), 크실렌(Xylene)을 외부 환경에 따른 오차를 줄이고자 가장 안 좋은(밀폐) 환경을 가정하고 가스검지관을 이용하여 가스배출량을 측정해 보았다. 그 결과 A사 에폭시코팅제가 제품 자체에도 휘발성유기화합물(VOCs)을 가장 많은 양 함유하고 있고, A사 에폭시코팅제에 비하여 B사 바닥코팅제 A type은 약 79%, B type은 약 96% 이상의 적은 양을 나타냈다. 또한, 밀폐된 환경 조건에서 1시간과 8시간 경과 후 가스검지관을 이용하여 폼알데하이드(Formaldehyde), 톨루엔(Toluene), 크실렌(Xylene)에 대한 가스배출량을 측정하고 TWA값으로 환산한 결과에서도 A사 에폭시코팅제가 가장 높게 측정되었다. A사 에폭시코팅제보다 B사 바닥코팅제 A type은 약 42.3%이상의 적은 측정값을 나타냈으며, B type의 경우 밀폐된 환경 조건에서도 시간가중평균노출기준(TWA)을 모두 만족하였다.

• 해양환경안전학회지
• /
• 제30권4호
• /
• pp.365-372
• /
• 2024

대한민국의 해양레저산업은 세일링을 비롯한 다양한 형태의 수상레저 활동이 증가하는 추세에 따라 세계적으로 신흥시장으로 주목받고 있어 세일링 요트에 대한 수요가 높아질 것으로 추정된다. 이에 따라 2022년 현재 우리나라 요트 문화의 부흥과 보급을 위해 해양수산부의 지원을 받아 28피트 세일 요트의 설계 및 개발이 착수되었다. 개발 초기 단계에서의 성능을 확인하고 이를 통해 설계 인자를 결정하기 위하여 속도 예측 프로그램 VPP(Velocity Prediction Program) 분석이 수행되었다. 본 연구에서 사용된 소프트웨어는 University of Southampton의 Wolfson Unit사(社)의 WinDesign으로, 속도 예측에 적용된 유체역학적 데이터 모델은 Wolfson Unit사(社) 자체적인 조선공학 및 요트연구 분야에서 수십 년간의 예인 수조 시험 데이터를 회귀 분석한 방법으로 대부분의 현대식 요트에 대해 신뢰할 수 있는 추정치를 제공하는 것으로 여겨진다. 하지만 예인 수조 시험이나 CFD 수치해석 등을 통한 실험 결과적인 유체역학적 정보가 없기 때문에 소프트웨어에서 제공하는 유체역학적 데이터 회귀 모델의 저항 값은 다소 차이가 있을 것으로 예상된다. 또한, 아직 미완료된 무게 중심 추정에 의한 VCG 값은 속도 예측의 입력 변수 중 하나로, 성능 결과에 어느 정도 영향을 미칠 수 있을 것으로 예상된다. 개발 세일 요트에 대한 최적화된 보트 속도는 풍속 4, 8, 12, 16 및 20노트의 집세일 조합(최대 120° TWA) 및 스피네커 세일 조합(80° TWA부터) 모두에서 확인되었으며, VPP를 활용하여 얻어진 최적화된 속도는 국제적으로 유사한 등급의 요트와 견줄수 있는 수준으로 확인되었다.

• 월간산업보건
• /
• 통권280호
• /
• pp.27-31
• /
• 2011

Vinyl chloride(염화비닐)에 대한 직업적 노출기준인 TLV-TWA를 1 ppm (2. 6 mg/$m^3$)으로 권고한 것은 간암의 가능성과 특히 간혈관육종을 최소화하기 위한 것이다. 염화비닐과 간암에 대한 명확한 사람들의 사례와 역학조사 결과를 근거로 사람에서의 확실한 발암성물질인 Al으로 분류하였다. 피부 (Skin), 감작제(SEN)의 경고주석과 TLV-STEL.을 권고하기에는 자료가 불충분하다.

• 한국환경보건학회지
• /
• 제33권5호
• /
• pp.359-364
• /
• 2007

The aim of this study were to assess the personal exposure to volatile organic compounds (VOCs) and to estimate the personal exposure using time-weighted average model. Three target VOCs (benzene, toluene, xylene) were analyzed in personal exposure samples and residential indoor, residential outdoor and workplace indoor microenvironments samples in the iron mill 30 workers during working 5 days. Personal exposure to VOCs significantly correlated with workplace concentration p<0.05), suggesting workplace had strong source and major contribution to personal exposure. Personal exposure could be estimated with time activity pattern and time weighted average (TWA) model of residential indoor and workplace concentrations measured. Time weighted mean microenvironments concentrations were close approximately of personal exposure concentrations. Total exposure for participants can be estimated by TWA with microenvironments measurements and time activity pattern.

• 한국산업보건학회지
• /
• 제19권3호
• /
• pp.195-201
• /
• 2009

To identify relationship between the airborne concentrations of formaldehyde and the causal factors in the endoscope unit of hospitals, a total of 48 workers selected from 4 hospitals (3 university hospitals and 1 national hospital) were investigated. Airborne formaldehyde samples were collected using passive samplers and subsequently analyzed by HPLC according to the OSHA method 1007. The geometric mean(GM) of airborne formaldehyde concentrations was 0.056 ppm (range: 0.003~0.923 ppm). The rates of exceeding exposure limits of OSHA PEL-TWA and NIOSH REL-TWA were 4.2 % and 83.3%, respectively. The STEL GM concentration was 1.428 ppm(range: 0.103~14.773 ppm). Ventilation condition (p=0.001) and temperature (p=0.017) were statistically significant causal factors for the airborne exposure concentration of formaldehyde in the endoscope unit of hospitals. In conclusion, the workers in the endoscope unit of hospitals were highly exposed to formaldehyde, and adequate controls such as appropriate management of ventilation and temperature are recommended to reduce over exposure to formaldehyde.

• 한국산업보건학회지
• /
• 제25권1호
• /
• pp.45-57
• /
• 2015

Objectives: This study aims to compare the physicochemical characteristics, toxicological data with Occupational Exposure Limits (OELs) of chemicals under the Occupational Safety and Health Act(OSHA) regulated by the Ministry of Employment and Labor of Korea. Methods: Information on chemicals which have OELs on physicochemical characteristics and toxicological data was collected using Material Safety Data Sheet(MSDS) from Korea Occupational Safety and Health Agency(KOSHA) and the Korea Information System for Chemical Safety Management(KISChem) in 2014. Statistical analyses including correlation and simple regression were performed to compare the OELs with chemical characteristics including molecular weight, boiling point, odor threshold, vapor pressure, vapor density, solubility and octanol-water partition coefficient(OWPC) and toxicological data such as median lethal dose($LD_{50}$) and median lethal concentration($LC_{50}$). Results: A total of 656 chemicals have OELs under OSHA in Korea. The numbers of chemicals which have eight-hour time weighted average(TWA) and short term exposure limits(STEL) are 618 and 190, respectively. TWA was significantly correlated with boiling point and STEL was only correlated with vapor pressure among physicochemical characteristics. Solubility and OWPC between "skin" and "no skin" substances which indicate skin penetration were not significantly different. Both $LD_{50}$ and $LC_{50}$ were correlated with TWA, while the $LC_{50}$ was not with STEL. As health indicators, health rating and Emergency Response Planning Guidelines(ERPG) rating as recommended by the National Fire Protection Association(NFPA) and American Industrial Hygiene Association(AIHA) were associated with OELs and reflect the chemical hazards. Conclusions: We found relationships between OEL and chemical information including physicochemical characteristics and toxicological data. The study has an important meaning for understanding present regulatory OELs.