• Title/Summary/Keyword: TW3 method

Search Result 44, Processing Time 0.019 seconds

Coliform Regrowth and Injured Coliforms in Public Water Supply (수돗물에서의 대장균군 재생장과 손상 대장균군)

  • 박성주;조재창;김상종
    • Journal of environmental and Sanitary engineering
    • /
    • v.9 no.2
    • /
    • pp.50-57
    • /
    • 1994
  • Densities of total and injured coliforms in treated water( TW ) and three tap water salt pies( Taps Kl, K2 and K3) of Ku- eui water treatment plant and one tap water sample( Tap T) of Tuk- do water treatment plant were measured 23 times from 1991 to 1992. Coliform regrowth in the water distribution system occurred three times during the study period. When the regrowth episode occurred, injured coliforms were always but total coliforms were not always detected in treated water. Mean densities of total coliforms in TW, and Taps Kl, K2, K3 and T were 0.8, 2.3, 1.9, 1.4 and 2.1 cfu/100mℓ by membrane filtration method using m- TF agar and those of injured coliforms were 3.4, 2.8, 2.5, 2.7 and 2.9 c1u/100mℓ using mondo- LES agar. The injury rates of TW and Taps Kl, K2, K3 and T were 89.5,77.4,67.9, 82.8 and 75.9%, respectively. The high injury rate of coliform bacteria in Seoul water supply can cause regrowth problems in distribution systems due to the repair of injured cells under an appropriate condition. It is recommended the injured coliforms should be measured in drinking water since they can lead to a significant underestimation of total coliforms and result in an inaccurate evaluation of the potential health risks.

  • PDF

Photolysis Improvement of Toluene in 50%TiO2/6%WO3 Sol Solutions Sensitized by Acetone (50%TiO2/6%WO3 졸 용액에서의 톨루엔 처리에 대한 아세톤의 광활성 증가효과)

  • Shin, Hye-Seung;Kim, Jae-Hyoun
    • Journal of Environmental Health Sciences
    • /
    • v.38 no.3
    • /
    • pp.261-268
    • /
    • 2012
  • Objectives: The photocatalytic degradation of toluene in a batch mode photoreactor for the purpose of the hazardous waste treatment was investigated. Methods: Kinetic experiments using a low pressure mercury lamp (Lambda Scientific Pty Ltd, 50 Watt) emitting both UV and visible light were performed at $31^{\circ}C$ over toluene concentrations ranging from 10 to 50 mg/l in water with $50%TiO_2/6%WO_3$ (TW) concentration of 1 g/l at a pH of 6. Results: Kinetic studies showed that $50%TiO_2/6%WO_3$ (TW) photocatalyst was highly active in toluene degradation; we observed that 99% of the pollutant was degraded after six hours under visible irradiation; furthermore, we observed that adsorption onto TW catalyst was responsible for the decrease of toluene with pseudo-first order kinetics. It was also found that oxygen as a radical source in the sol medium played a significant role in affecting the photodegradation of toluene, especially with a two-fold elevation. This increase was achieved by a more than four-fold elevation of the photodegradation of toluene in the presence of acetone than without, presumably via an energy transfer mechanism. Conclusions: We concluded that photodegradation in acetone and oxygen molecules along with TW was an effective method for the removal of toluene from wastewater.

A Simple Method for Designing Traveling-Wave Electrodes with Periodic Capacitive Loads of Velocity-Matched Distributed Photodetectors (속도정합 분포형 광검출기의 주기적인 부하를 갖는 진행파형 전극의 간편한 설계방법)

  • 오재필;이상선
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.12 no.3
    • /
    • pp.451-461
    • /
    • 2001
  • We present a simple design method of velocity-matched traveling-wave (TW) electrode with periodic capacitive loads. Once matching impedance and optical phase velocity are defined, the width and separation of coplanarstrip (CPS) and the magnitude and period of capacitive load are determined analytically. Calculation results of velocity-matched TW electrodes on GaAs substrates show bandwidths of more than 100 GHz.

  • PDF

Effects of Drinking Ion Water on Performance, Egg Quality and Blood Biochemical Composition of Laying Hens under High Temperature Conditions (고온환경에서 이온수의 급수가 산란계의 생산성, 계란 품질 및 혈액성상에 미치는 영향)

  • Lim, Chun Ik;Rana, Md Masud;Li, Hong Long;Cho, Tae Hyun;Ryu, Kyeong Seon
    • Korean Journal of Poultry Science
    • /
    • v.47 no.3
    • /
    • pp.121-126
    • /
    • 2020
  • This study was conducted to investigate the effect of drinking ion water on the performance, egg quality, and serum biochemical properties of laying hens in a high-temperature environment. A total of 180 laying hens with equal egg production rates were randomly divided into three treatments with five replicates. Treatments were applied from 24 to 27 weeks of age and included the supply of ion water (IW), tap water (TW), and cold water (CW). The results showed that the egg production rate, egg weight, and feed intake of hens were significantly (P<0.01) improved in the IW group compared with those in the TW group but did not differ from those in the CW group. Egg quality parameters such as albumen height, Haugh unit, and eggshell thickness were found to be higher in the IW than in the TW group (P<0.05); however, no significant differences were observed in comparison with the CW group. Serum Ca and P concentrations tended to increase (P<0.10) in the IW group, and serum high-density lipoprotein cholesterol and albumin levels were greater (P<0.05) in response to IW than those to TW. This study provides evidence that the supply of IW can relieve the high-temperature stress during the summer. In particular, because the improved effects of the IW were confirmed to be similar to those of CW, it shows potential as a method to manage the drinking water of hens in the summer season along with the supply of CW.

The comparisons of three scatter correction methods using Monte Carlo simulation (몬테카를로 시뮬레이션을 이용한 산란보정 방법들에 대한 비교)

  • 봉정균;김희중;이종두;권수일
    • Progress in Medical Physics
    • /
    • v.10 no.2
    • /
    • pp.73-81
    • /
    • 1999
  • Scatter correction for single photon emission computed tomography (SPECT) plays an important role to improve image quality and quantitation. The purpose of this study was to investigate three scatter correction methods using Monte Carlo simulation. Point source and Jaszack phantom filled with Tc-99m were simulated by Monte Carlo code, SIMIND. For scatter correction, we applied three methods, Compton window (CW) method, triple window (TW) method, and dual photopeak window (DPW) method. Point sources located at various depths along the center line within a 20-cm phantom were simulated to calculate the window ratios and corresponding scatter fractions by evaluating the polynomial coefficients for DPW method. Energy windows were located in W$_1$=92-125 keV, W$_2$=124-126 keV, W$_3$=136-140 keV, W$_4$=140-141 keV, and W$_{5}$=154-156 keV. The results showed that in Jaszack phantom with cold sphere and hot sphere, the TW gave the closest contrast and percentage recovery to the ideal image, respectively, while CW overestimated and DPW underestimated the contrast of ideal one. All three scatter correction methods showed an improved image contrast. In conclusion, scatter correction is essential for improving image contrast and accurate quantification. The choice of scatter correction method should be made on the basis of accuracies and ease of implementation.

  • PDF

40 Gb/s Traveling-Wave Electroabsorption Modulator-Integrated DFB Lasers Fabricated Using Selective Area Growth

  • Kwon, Yong-Hwan;Choe, Joong-Seon;Sim, Jae-Sik;Kim, Sung-Bock;Yun, Ho-Gyeong;Choi, Kwang-Seong;Choi, Byung-Seok;Nam, Eun-Soo
    • ETRI Journal
    • /
    • v.31 no.6
    • /
    • pp.765-769
    • /
    • 2009
  • In this paper, we present the fabrication of 40 Gb/s traveling-wave electroabsorption modulator-integrated laser (TW-EML) modules. A selective area growth method is first employed in 40 Gb/s EML fabrication to simultaneously provide active layers for lasers and modulators. The 3 dB bandwidth of a TW-EML module is measured to be 34 GHz, which is wider than that of a lumped EML module. The 40 Gb/s non-return-to-zero eye diagram shows clear openings with an average output power of +0.5 dBm.

Comparative evaluation of the mutagenicity and genotoxicity of smoke condensate derived from Korean cigarettes

  • Kim, Ha Ryong;Lee, Jeong Eun;Jeong, Mi Ho;Choi, Seong Jin;Lee, Kyuhong;Chung, Kyu Hyuck
    • Environmental Analysis Health and Toxicology
    • /
    • v.30
    • /
    • pp.14.1-14.7
    • /
    • 2015
  • Objectives Cigarette smoking is associated with carcinogenesis owing to the mutagenic and genotoxic effects of cigarette smoke. The aim of this study was to evaluate the mutagenic and genotoxic effects of Korean cigarettes using in vitro assays. Methods We selected 2 types of cigarettes (TL and TW) as benchmark Korean cigarettes for this study, because they represent the greatest level of nicotine and tar contents among Korean cigarettes. Mutagenic potency was expressed as the number of revertants per ${\mu}g$ of cigarette smoke condensate (CSC) total particulate matter whereas genotoxic potency was expressed as a concentration-dependent induction factor. The CSC was prepared by the International Organization for Standardization 3308 smoking method. CHO-K1 cells were used in vitro micronucleus (MNvit) and comet assays. Two strains of Salmonella typhimurium (Salmonella enterica subsp. enterica ; TA98 and TA1537) were employed in Ames tests. Results All CSCs showed mutagenicity in the TA98 and TA1537 strains. In addition, DNA damage and micronuclei formation were observed in the comet and MNvit assays owing to CSC exposure. The CSC from the 3R4F Kentucky reference (3R4F) cigarette produced the most severe mutagenic and genotoxic potencies, followed by the CSC from the TL cigarette, whereas the CSC from the TW cigarette produced the least severe mutagenic and genotoxic potencies. Conclusions The results of this study suggest that the mutagenic and genotoxic potencies of the TL and TW cigarettes were weaker than those of the 3R4F cigarette. Further study on standardized concepts of toxic equivalents for cigarettes needs to be conducted for more extensive use of in vitro tests.

Evaluation of skeletal maturity in the cervical vertebrae and hand-wrist in relation to vertical facial types

  • Lee, Ye-Seul;Choi, Sung-Hwan;Kim, Kyung-Ho;Hwang, Chung-Ju
    • The korean journal of orthodontics
    • /
    • v.49 no.5
    • /
    • pp.319-325
    • /
    • 2019
  • Objective: To evaluate differences in skeletal maturity in relation to vertical facial types and to compare differences in the skeletal maturity of the cervical vertebrae and hand-wrist in females. Methods: This study included 59 females aged 7 to 9 years with skeletal Class I malocclusion. The participants were categorized into three groups (low, normal, and high) according to the mandibular plane angle. Skeletal maturity was measured using skeletal maturity indicators (SMIs) and the Tanner-Whitehouse III (TW3) method on hand-wrist radiographs and by using cervical vertebrae maturation indicators (CVMIs) on lateral cephalometric radiographs. Results: The SMI was higher in the high-angle group than in the low-angle group (p = 0.014). The median TW3 bone age was 11.4 months higher in the high-angle group than in the low-angle group (p = 0.032). There was no significant difference in CVMI among the three groups. Skeletal maturity showed a weakly positive correlation with the mandibular plane angle (SMI, r = 0.391; TW3, r = 0.333; CVMI, r = 0.259). Conclusions: The skeletal maturity of the hand-wrist in females with a high mandibular plane angle was higher than that in females with a low mandibular plane angle. Obtaining additional hand-wrist radiographs may facilitate evaluation of skeletal maturity of females. In females with a high mandibular angle, the time to commence orthodontic treatment may be earlier than that in females with a low mandibular angle.

Analysis of Equivalent Circuit Approach for Ridge Type CPW Traveling - Wave Structure (릿지 형태 CPW 진행파형 구조의 등가회로 분석)

  • 윤상준;공순철;옥성해;윤영설;구민주;박상현;최영완
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.41 no.3
    • /
    • pp.45-54
    • /
    • 2004
  • Microwave characteristics of ridge type CPW traveling-wave(TW) electroabsorption modulator and photodetector are affected by the thickness of intrinsic layer, width of guiding layer, and the separation of signal and ground electrodes. These factors are determined effective index of microwave and characteristic impedance due to changing of capacitance(C) and inductance(L) of device. However, conventional equivalent circuit of TW-structure is approximated to microstrip and CPW transmission line by distribution of electric and magnetic fields, respectively. In this paper, we analyzed microwave characteristics of TW-structure and found more accurate value of C and L by using finite difference time domain (FDTD) method. These values are adopted circuit element of equivalent circuit. Microwave characteristics obtained by the FDTD and equivalent circuit model show good agreement.

Traveling-wave type CPW InGaAsP Photodecector at 1.55$\mu\textrm{m}$ (1.55$\mu\textrm{m}$ 진행파형 CPW InGaAsP Photodetector)

  • Yun, Yeong-Seol;Gang, Tae-Gu;Lee, Jeong-Hun;Ok, Seong-Hae;Gong, Sun-Cheol;Choe, Yeong-Wan
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.39 no.3
    • /
    • pp.41-48
    • /
    • 2002
  • The bandwidth limitation of traveling-wave electroabsorption modulator(TW-EAM) is determined by the transit time, the velocity-mismatch between optical-wave and microwave, the impedance-matching, the dispersion and the microwave loss. In this paper, we introduce an hovel impulse response of TW-EAM considering transit time as well as velocity-mismatch. We analyze the effect of transit-time and velocity-mismatch at the same time, using the FDTD method. We investigate the modulation bandwidth by changing the depth of the intrinsic region. We suggest that the optimum depth of the intrinsic region is 0.2${\mu}{\textrm}{m}$ when the absorption coefficient($\alpha$) is 0.2${\mu}{\textrm}{m}$-1.