• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1081-1099
• /
• 2010

The TVM 430 system manufactured by Ansaldo STS in France is currently used in ground signalling system for Kyungbu HSR. It transmits the speed information to the on-board signalling system in the form of continuous signal via the track, and the rolling stock in Kyungbu HSR runs with 300km/h max. operating speed by using the corresponding information. Looking from the recent international trends in HSR, reducing the travelling time and increasing of the line capacity is promoting via the improvement of train speed. In case of TGV Est, they are realizing the normal operation with 320km/h max. operating speed by using TVM SEI signalling system, which is similar to TVM 430. Furthermore, in case Honam HSL, which is under construction, is looking over faster speed than the limited one of Kyungbu HSR(i.e. over 300km/h). In this paper, it is assumed that the existing TVM 430 ground signalling system is used and train speed is improved, therefore the number of block section to be increased depending on the increase of train speed and the standard speed to be used in this case is drawn via the simulation of the train model and described the method accordingly.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1423-1425
• /
• 2000

경부고속전철(KTX)의 운행은 서울-동대구간은 고속선에 의한 고속 운행을 실행하는 반면, 동대구-부산간은 기존선 전철화 및 선로 개량 사업을 통해 기존선을 운행한다. 그 결과 남서울, 북대전, 남대전, 및 북대구의 기존선과 고속선 연결부 인터페이스는 가장 중요한 검토 및 연구 대상으로, 기존선과 고속선 간의 속도 형상에 대한 호환성은 KTX 차량의 적절한 운행을 결정하는 기본 요소이며 또한 필수 요소로 작용한다. 따라서 본 연구에서는 기존선과 고속선 신호 시스템의 호환성에 따른 속도 천이를 분석한다.

• Journal of the Korean Society for Railway
• /
• v.15 no.6
• /
• pp.631-637
• /
• 2012

New Opening of Suseo-Pyeongteak High Speed Railway (HSR) will be a new leap in the Korean railway history. However if this section of HSR line around Seoul Metropolitan Area opens, the confluence of new HSR and existing HSR line in Pyeongteak-Osong section will cause a bottle neck problem. In other words, the opening of Suseo-Pyeongteak HSR line will make the capacity of track reach the limit and the section of railroad between Pyeongteak and Osong will be saturated. This will also make such troubles as restricting the number of train which stops at Cheonan-Asan station. In this study, based on the train assignment theory of TVM430 signal system, the methods of calculating headway and number of train are reviewed and the plan for application of optimal operation pattern during peak hour between Pyeongteak-Osong section is also suggested. To remove the bottle neck problem in this HSR section, 3 alternatives are suggested and the expected effects and problems of each alternative are also analyzed. The results show that the troubles caused by excess of track capacity can be removed without any additional cost if the minimum headway in operating system for HSR is adopted in this section. In the future, if these alternatives are considered to the long-term plan for operating train and signal systems, this will improve the efficiency of train operation, which can remove the bottle neck in the HSR line.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1029-1030
• /
• 2008

철도에서는 열차가 출발할 때 착력을 향상시키기 위해 레일과 차륜사이에 모래를 살사하게 되는데 이때 ATC(Automatic Train Control : 열차자동제어장치) 신호파형에 영향을 줄 수 있다는 판단에 따라 시험운행하면서 ATC 차상장치인 TVM 430의 CRNB 보드 내에서 살사동작 후 신호파형을 측정하고 분석하였다. 이로 인해 다중화 되어 있는 차상장치 시스템의 동작상태와 살사재료별 ATC 신호파형에 미치는 영향성을 파악할 수 있었으며 향후 살사로 인해 발생되는 문제점 등의 연구에 활용될 수 있을 것으로 판단된다.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1724-1728
• /
• 2008

Track circuit is transmitted throughout the rails. In order to insure safe and reliable operation of track circuits, the track and the environment should respect mandatory electrical characteristics. In addition, for cab signalling through track Circuit as per TVM 430, these electrical characteristics should insure the transmission to the train. Track circuits have several operation and safety functions. They can detect the train position and broken rails. When track circuits are used as track to train transmission, they also have to be powered enough to be captured by the train sensors.