Search | Korea Science

Lin, Jin-Hua;Seo, Seung-Hyun;Kim, Tai-Young
- Journal of the Korean Institute of Rural Architecture
- /
- 제10권1호
- /
- pp.19-26
- /
- 2008
1) Lishu village is located in a riverside of an upper Tu-men river. Since an upper tream of Tu-men river is narrow and easy to pilot a boat, early in the past, it facilitated the form of the village near to the North Korea. 2) As for elevation, it consisted of only doors, but as time goes by, windows were made. So windows and doors were appearing much in the elevation. In 1970s', elevations are constructed in various ways; in 1980, attributed to brick housing, the elevations become much more diverse; from 1990, symmetrical elevation was revealed which consists of one door and two windows in each side of a door after 2000, the structure of the housing restored of 1930s' style which contained one window in Jungji and 1970s' style consisting of 3 windows, moreover, many free-style elevations appeared to be commercial use.
PDF

Lee, Jin-Hyeong;Lee, Ju-Yeol;Kim, Man
- Proceedings of the Korean Institute of Surface Engineering Conference
- /
- 한국표면공학회 2009년도 추계학술대회 초록집
- /
- pp.155-155
- /
- 2009
The copper plating was deposited by pulse reverse current (PRC) method with additives. The all specimens were first immersted in 10% H2SO4 for 10 minutes, and then were rinsed with deionized water. The current densities of forward pulse were 400mA/$cm^2$, and those of reverse pulse were 1900mA/$cm^2$ and 100mA/$cm^2$. Results are compared for different additives for pulse plating conditions. When it added in Only CH4N2S (TU) or only C10H13NO3S (SVH), the effect of surface side growth of Cu was not different. But when it added in TU and SVH, surface side growth of Cu decreased. Polarization curves were measured from OCP to -0.7 V at a rate of 1mV/sec. Each specimen was observed under the PHENOM to see surface morphology.
PDF

Park, Byung-Kyu;Hong, Taek;Park, Sang-Hee
- Korean Journal of Air-Conditioning and Refrigeration Engineering
- /
- 제11권5호
- /
- pp.561-569
- /
- 1999
The effects of longitudinal heat conduction on the performance of heat transfer surfaces are investigated by using a single-blow method. In the transient testing method for determining the heat transfer characteristics, exponential inlet temperature variations are made by using screen-mesh heater with small time constant and low frontal velocities of the test section, and the experimentally determined inlet temperature profile is used as the inlet fluid temperature condition. The effects of longitudinal heat conduction are negligible only if $\gamma^\act<0.05\;and \;N_{tu}\le3$ and should be considered if $N_{tu}\le3$ The test results ate compared with the existing theoretical and experimental data and the validity of this technique is confirmed by the good agreement.
PDF