• Spatial Information Research
• /
• v.15 no.2
• /
• pp.123-134
• /
• 2007

The building boundary should be registered in the cadastral map for the protection of property using the expansion of the registration items in the cadastral record and the construction of 3D-cadastral information system. In this study, the efficiency of registering the building boundary was suggested by non-target TS survey through the comparison between target TS and non-target TS survey about an accuracy and efficiency. At the result of this research, the RMSE of target TS and non-target TS survey is the X; ${\pm}0.056m$ and Y; ${\pm}0.043m$. Therefore, non-target TS survey shows the high accuracy. Also, the non-target TS survey is more efficient cost on time and personnel than target TS.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2009.04a
• /
• pp.119-123
• /
• 2009

In the areas of civil engineering or cadastral surveying, multi-orientation process such as setting out boundary mark is regarded as one of the important tasks, measuring land feature and indicating acquired data to the grounds. In case of using dual frequency receiver and TS(total station), there are much advantages in setting out surveying results in the field. However, it costs very expensive and the equipments for enhancing correctness are very complex. In this study, technical factor was reviewed in which single frequence receiver and TS, comparatively cheap and easy to establish a system, was connected into TS(Total Station) in order to make easy to orientation and setting out. As a result of this study, it was possible to support GPS and TS surveying and set out it by short distance wireless communication method using single frequency GPS receiver. And by developing the system, it also could lessen the time of setting out in large areas and difficulty of the surveyors in the field.

• Journal of Industrial Technology
• /
• v.31 no.B
• /
• pp.9-15
• /
• 2011

Nowadays, the Surveying field is growing rapidly in terms of technology such as TS(Total Station) surveying, photographic surveying, digital aerial photogrammetry, utilization of GIS(Geographic Information System) using high-resolution satellite imagery, obtaining 3D Coordinate using GPS. But control point surveying, benchmark measuring, and field Surveying are still performed by the engineers in the field. So, 3D yerrestrial laser scanner comes to the fore recently. 3D terrestrial laser scanner can get 3D coordinate about a number of sites of the subject in a short period with high accuracy. This paper compared the accuracy of data from the performance using 3D terrestrial laser scanner with that of TS. It also obtained the geopositioning accuracy result equivalent to the surveying result of TS. With further researches in the future, it is expected to be used not only in LiDAR itself but also in various areas like reconnaissance Surveying and construction by combining with TS or other Surveying equipments.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.3
• /
• pp.199-207
• /
• 2013

In hydrographic survey, data surveyed with multibeam system includes various errors due to multiple factors. These are corrected by a calibration called patch test, and if existing method is used, the test needs to be conducted for about 8 times for precise system calibration. For more prompt and precise multibeam system calibration, the exact offset of a ship was determined using terrestrial laser scanning and TS surveying, which was used as the initial input for the patch test. In the result, the error of closure was 0.001 m or less for TS surveying and backsight error was 0.005 m or less for scanning. All the surveying data based on the same local coordinate was converted into vessel reference coordinate during which R-square for all rotation angles was 0.99 or higher and standard deviation was 0.008 m or less. Finally, in a patch test using calculated offset of sensors and motion sensor offset, the offset of MBES transducer satisfied manual on hydrography only with 1-time calibration. With these results, it is thought that terrestrial laser scanning and TS surveying can fully be utilized for multibeam system calibration.

• Journal of Korean Society for Geospatial Information Science
• /
• v.15 no.3
• /
• pp.87-96
• /
• 2007

In the numerical cadastral surveying field, the cadastral surveying would be measured with the Total Station surveying (electronic plane table surveying) system that consist the Total Station for surveying and the computing system for recording and editing the measured coordinates data by the TS. This study would suggest the advanced method, which is used on the RTK-GPS instead of TS for surveying and the computing system for handling the coordinates data and mapping. As a result of this study, although the measurement accuracy of the RTK-GPS and TS surveying make no greate difference, the suggested method reduces the cost of time and work force with the TS surveying. Besides, the new survey method would be more efficient due to directly handling the data and mapping in the field.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2002.10a
• /
• pp.83-86
• /
• 2002

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.04a
• /
• pp.485-488
• /
• 2003

본 연구는 건설공사의 경계점 및 구조물의 기준점을 TS를 활용하여 현장 측지좌표체제를 탈피지적좌표로 전환 관리하여 토지경계분쟁 문제의 사전제거 및 공사품질시공관리에 향상을 기하고자 연구하였다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.21 no.3
• /
• pp.199-207
• /
• 2003

In the study, the open area keeping a few visible satellites and the urban area covered with the high building, an electric pole were chosen far evaluation of accuracy of satellite positioning. First, suggest the validity of GPS/GLONASS, TS/RTK-GPS, and compared the accuracy with that of the classical surveying method. As a result, In static relative surveying, the difference of between the known cadastral supplementary control station and that of the acquired is 0.000∼.0006m in GPS alone, GPS/GLONASS, and In the RTK-GPS/TS, 0.010∼0.077m on the non-ambiguity fixed solutions in the urban area 0.008∼0.078m in the open area. it proved to be valid because it is within the allowed connecting errors, i.e 12cm on the baseline of loom in l/l,200 cadastral map.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.10a
• /
• pp.91-96
• /
• 2003

In static relative surveying, the difference of between the known cadastral supplementary control station and that of the acquired is 0.000∼0.0006m in GPS alone, GPS/GLONASS, and In the RTK-GPS/TS, 0.010∼0.077m on the non-ambiguity fixed solutions in the urban area, 0.008∼0.078m in the open area. it proved to be valid because it is within the allowed connecting errors, i.e 12cm on the baseline of l00m in 1/1,200 cadastral map.

• Korean Journal of Geomatics
• /
• v.1 no.1
• /
• pp.21-26
• /
• 2001

Total Station (TS) is currently widespread and used in many fields of surveying projects. However, its application functions are not perfectly understood and so insufficiently used. One of them is indirect leveling method using TS. Because we can reach a considerable accuracy level with this method, it is gradually expanding for public surveying works such as construction of roads, airports and harbors. This paper gives results of an experiment to increase accuracy of indirect leveling by TS without direct leveling, which is more comfortable and quick to determine elevation.