• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.103.1-103.1
• /
• 2015

위성체 개발에 있어서 지상에서 위성체의 부품에 대한 고온($85^{\circ}C$ 이상)과 고진공($5.0{\times}10-3Pa$ 이하)의 상태를 모사하여 오염물질을 제거하는 베이크아웃 시험이 필수적이다. 일반적으로 베이크아웃 시험의 종료여부는 TQCM (Thermoelectric Quartz Crystal Microbalance)을 이용한 탈기체(outgassing)의 흡착률을 측정하여 결정한다. 측정된 흡착률을 통해 시험 대상 표면에서 발생하는 탈기체량을 추정할 수 있으며, 결국 시험 대상의 우주 부품으로써의 적합성을 판단할 수 있다. TQCM을 적용하지 못하는 경우, 베이크아웃 시험 종료여부를 판단하기 위해 잔류가스분석기(Residual Gas Analyzer: RGA)를 활용하는 것을 고려하였다. 베이크아웃 시험 중 잔류가스분석기를 활용하여 시편에서 방출되는 오염물질을 측정하였으며, 그 중 측정량이 가장 많은 40-45 amu 범위의 측정값 추이를 관찰하여, 베이크아웃 시험 종료조건 수립 가능성을 검토하였다.

• Aerospace Engineering and Technology
• /
• v.2 no.2
• /
• pp.45-49
• /
• 2003

A Bake-Out test for STSAT-1 FM(Flight Model) was performed in a Bake-Out Chamber at SITC(Satellite Integration & Test Center) in KARI(Korea Aerospace Research Institute). The purpose of this test is to measure and analyze the outgassing rate to affect the optical equipment(FIMS) and to eliminate contaminants through the high temperature bake-out. This Bake-Out test is composed of three parts which are honeycomb panels & harnesses(Batch 1), an assembled satellite(Batch 2), and a disassembled satellite(Batch 3). For each test, quantitative and qualitative measurements and analysis were performed using TQCM(Thermoelectric Quartz Crystal Microbalance) and RGA(Residual Gas Analyzer.)

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.131-131
• /
• 2012

압전재료는 그 특성상 항공우주분야에서 활용범위가 넓어지고 있는데, 특히 진동제어 분야에 널리 이용되고 있다. 최근에는 위성카메라의 영상 품질개선을 위한 구동기(actuator) 연구도 진행 중이다. 그러나 위성체가 작동하는 우주환경인 고진공상태에서는 각 부품에서 발생할 수 있는 outgassing으로 인해 위성체가 오염되어 위성임무 실패를 초래할 수도 있다. 따라서 지상에서 위성체 부품에 대해 고온($60^{\circ}C$)과 고진공(5.0 E-03 Pa 이하)의 상태를 모사하여 오염물질을 제거함으로써 outgassing 발생을 막고, 오염근원을 검출할 수 있는 bacuum bake-out 시험이 필요수적이다. 압전체의 위성부품 활용성 연구를 위하여 bake-out 챔버를 이용하여 오염측정에 관한 연구를 수행하였다. Vacuum bake-out 시험시에는 TQCM을 사용하여 발생하는 오염물질의 방출률을 측정한다. 아울러, 압전체에 대한 시험 전후의 압전특성을 비교 분석하여 진공 및 온도 환경하에서의 특성 변화를 관찰하였다.

• Journal of the Korean Vacuum Society
• /
• v.11 no.2
• /
• pp.87-96
• /
• 2002

Outgassing from such sources as paints, coatings, adhesives and other non-metallic surfaces can contaminate satellites, especially second surface mirror and optical lens, it cause satellite to fail in own missions. The vacuum bake-out test using high temperature(more than $85 ^{\circ}C$)and high vacuum(less than $5.0{\times}1-^{-3}$ Pa) certify that the components of satellite work properly and can survive and operate in space environment like high vacuum. In the bake-out chamber installed at SITC of KARI, Rotary vacuum pump and Booster pump produce low vacuum of 5.0 Pa, and then two cryopumps produce high vacuum of below $5.0{\times}10^{-3}$ Pa. Also 48 ceramic heaters were provided to simulate high temperature. During the vacuum bake-out test, we detected contaminants using RGA(Residual Gas Analyzer) and measure the outgassing rate of the contaminant using the TQCM(Thermoelectric Quartz Crystal Microbalance). Also, IR/UV Spectrometer and witness plate be used to certify that the components were suitable for the spacecraft. This paper includes the preparation and procedures of the bake-out test for SAR(Solar Array Regulator) and MLI(Multi Layer Insulator), which were the components of the spacecraft. Especially, we discussed the methods and results of the contamination measurement. In the bake-out for SAR, the contamination was measured continuously although it was on the decrease from TQCM results. And RCA established that it is a highly polymerized compound. In the MLI bake-out using RGA and witness plate, we didn't detect any contamination materials.

• Aerospace Engineering and Technology
• /
• v.12 no.1
• /
• pp.32-39
• /
• 2013

All spacecraft components shall be checked for compatibility with vacuum using CVCM and TML in advance. CVCM and TML of the PZT-5 piezoelectric vibrator has to be less than 0.1% and 1.0% respectively. Also, it has less than $500ng/cm^2/hr$ of TQCM for vacuum bake-out test using high temperature and high vacuum. Thus, the piezoelectric vibrator may be employed in the vacuum environments. Finally, it can be confirmed that the characteristics change of the piezoelectric vibrator is less than 1% under vacuum environments. Also, the temperature dependency of the characteristics in the PZT-5 piezoelectric vibrator with the lateral mode was investigated in the range of $-100^{\circ}C$ to $90^{\circ}C$ using the thermal vacuum chamber to utilize the vibrator to the aerospace industries. As the results, at room temperature, the resonant and anti-resonant frequencies had the minimum value, whereas, the dielectric constant increased linearly from about 2500 to 7500 in the given temperature range. The mechanical loss decreased linearly from 0.08 to 0.03.