• 한국측량학회지
• /
• 제34권2호
• /
• pp.161-169
• /
• 2016

This paper is intended to propose a novel approach to select an optimal site for a small-scaled artificial recharge system installation using TOPSIS (Technique for Order Preference by Similarity to Ideal Solution) with geospatial data. TOPSIS is a MCDM (Multi-Criteria Decision Making) method to choose the preferred one of derived alternatives by calculating the relative closeness to an ideal solution. For applying TOPSIS, in the first, the topographic shape representing optimal recovery efficiency is defined based on a hydraulic model experiment, and then an appropriate surface slope is determined for the security of a self-purification capability with DEM (Digital Elevation Model). In the second phase, the candidate areas are extracted from an alluvial map through a morphology operation, because local alluvium with a lengthy and narrow shape could be satisfied with a primary condition for the optimal site. Thirdly, a shape file over all candidate areas was generated and criteria and their values were assigned according to hydrogeologic attributes. Finally, TOPSIS algorithm was applied to a shape file to place the order preference of candidate sites.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2017년도 추계학술발표회
• /
• pp.212-212
• /
• 2017

• 한국산림과학회지
• /
• 제85권2호
• /
• pp.149-157
• /
• 1996

본 연구는 22개 지역에 대하여 임목수확 및 무육작업을 위한 임도개설순위를 결정하기 위하여, 다기준의사결정법중에 선호보정이 없는 모형인 최대최소법 및 최대최대법, 선호보정이 있는 모형인 단순가중치법, 계층가중치법 및 TOPSIS법의 적용성을 검토하였다. 그 결과 단순가중치법과 TOPSIS법이 임도개설순위의 결정에 적합한 것으로 판명되었다.

• 한국정밀공학회지
• /
• 제18권12호
• /
• pp.116-123
• /
• 2001

An automated injection molding design methodology has been developed to optimize multiple quality attributes, which are usually in conflict with each other, in injection molded parts. For the optimization, commercial CAE simulation tools and optimization techniques are integrated into the methodology. To decal with the multiple objective problem the relative closeness computed in TOPSIS(Technique for Order Preference by Similarity to Ideal Solution) is used as a performance measurement index for optimization multiple part defects. To attain robustness against process variation, Taguchi's quadratic loss function is introduced in the TOPSIS. Also, the modified complex method is used as an optimization tool to optimize objective function. The verification of the developed design methodology was carried out on simulation software with an actual model. Applied to production this methodology will be useful to companies in reducing their product development time and enhancing their product quality.

• 한국산업융합학회 논문집
• /
• 제24권6_2호
• /
• pp.891-897
• /
• 2021

In this paper, we propose a destination optimal route algorithm for providing route finding service for the transportation handicapped by using the multi-criteria decision-making technique and the modified A-STAR optimal route search algorithm. This is a method to set the route to the destination centering on safety by replacing the distance cost of the existing A-STAR optimal route search algorithm with the safety cost calculated through AHP/TOPSIS analysis. To this end, 10 factors such as road damage, curb, and road hole were first classified as poor road factors that hinder road driving, and then pairwise comparison of AHP was analyzed and then defined as the weight of TOPSIS. Afterwards, the degree of driving safety was quantified for a certain road section in Busan through TOPSIS analysis, and the development of an optimal route search algorithm for the transportation handicapped that replaces the distance cost with safety in the finally modified A-STAR optimal route algorithm was completed.

• 대한기계학회논문집A
• /
• 제35권7호
• /
• pp.729-736
• /
• 2011

TOPSIS(Technique for Order Preference by Similarity to Ideal Solution)는 상충되는 다수의 속성이 존재하는 상황에서 의사결정이 요구되는 다속성 의사결정법(Multi Attribute Decision Making) 중 하나이다. 이는 선택된 대체안이 최선의 이상적 대체안으로부터 가장 가까운 거리에 위치해야 하고, 동시에 부정적으로 이상적인 대체안으로부터는 가장 멀리 위치해야 한다는 논리에 입각한 의사결정 기법이다. TOPSIS 는 최소화와 최대화가 공존하는 다목적함수 형상 최적설계에 적용이 가능하다. 본 연구에서는 TOPSIS 와 베지어 곡선(Rational Bezier Curve)을 적용하여 CRT(Cathode Ray Tubes) 후면유리의 다중목적 형상최적설계를 수행하였다. 무게와 1 차 주응력의 두 가지 다중목적 함수를 최적화하기 위하여, 다중목적 함수의 성능지표를 TOPSIS 의 상대적 근접도로 정의하고 이를 반응표면모델로 구성하여 다중목적 형상최적설계가 가능한 방법론을 제안하였다. 이를 통해 하나의 최적해가 아닌 최적해의 군이 선정되어, 무게와 주응력 최적해의 모순관계를 확인하면서 다양한 설계요구 스펙을 만족시켜줄 수 있는 방안을 설계자가 스스로 선택하도록 하였다.

• 해양환경안전학회지
• /
• 제30권1호
• /
• pp.135-145
• /
• 2024

MEPC 80차 회의에서 IMO는 더욱 강화된 온실가스 감축 전략을 제시하였다. 기존의 72차 회의에서 제시하였던 초기전략보다 구체적이고 강화된 감축 전략이다. IMO는 2050년 무렵까지 국제 해운으로부터 온실가스 배출을 'Net Zero'에 도달하도록 전략을 세웠다. 이 논문에서는 대표적인 친환경 연료로 구분되는 LNG, 수소, 메탄올, 암모니아의 위험도 평가를 진행하였다. 전문가들의 설문조사를 통한 결과를 퍼지 기법을 적용하여 주관적인 모호성을 해결하였다. 또한 TOPSIS 기법을 통해서 퍼지의 긍정적인 해와 부정적인 해를 도출하였다. 이를 통해서 Vertex 방법을 이용하여 대체 연료의 근접계수 값을 최종적으로 구하여 결정하였다. 그 결과, 메탄올, LNG, 수소, 암모니아 순으로 선호하였다. 이 연구는 제안된 접근 방식이 대체 연료를 결정을 위한 집단 의사결정 방법으로 이용할 수 있음을 보여준다.

• 디지털산업정보학회논문지
• /
• 제13권1호
• /
• pp.197-211
• /
• 2017

In recent years, it is natural that the development and the maintenance of information systems are strongly dependent on outside service providers for economic reasons, especially in public sector. There has been an unexpected growth in the number of selection activities for outsourcing related works. At this time, selection of the contractor generally considers the proposals received based on the RFP(requested for proposal) and determines the ranking by experts committee. However, it is difficult even for expert giving a specific numeric score in weighting criteria or rating alternatives. In this context, an extended fuzzy TOPSIS method is applied for selection problem of IT proposals. A numerical illustration is also provided to demonstrate the applicability of the approach. This approach is very practical to help decision makers in assessing proposals during the selection phase under uncertainties.

• 한국정밀공학회지
• /
• 제23권11호
• /
• pp.68-77
• /
• 2006

Nowadays, the increasing global competition forces automobile manufacturer to increase quality and to reduce the cost and time for manufacturing planning. To solve these problems, automobile manufacturers try to apply digital manufacturing technologies. In this paper, a concept of method for planning the digital assembly system is proposed. Based on the requirements of assembly tasks obtained through product analysis, the function and sequence modeling for assembly process is executed using the IDEF0 and UML model. For implementation of digital assembly system, the selected components are modeled by using 3D CAD tools. According to the system configuration strategy, lots of the alternative solutions for the assembly system are generated. Finally, the optimal assembly system is chosen by the evaluation of the alternative solutions with TOPSIS(Technique for Order Preference by Similarity to Ideal Solution) method. According to proposed procedure, digital laser welding system is implemented in DELMIA.

• 경영과학
• /
• 제14권2호
• /
• pp.1-17
• /
• 1997

Many companies in these days have pursued an outsourcing policy to survive in a highly competitive world market. To effectively deal with the outsourcing policy, it is required that the companies have a useful method to rationally evaluate a supplier's performance from a viewpoint of a company's strategy and in a comparative-integrated manner. In this paper, we examined the relative importance of supplier selection criteria for a company's strategy by conducting a survey and proposed "Technique for Order Preference by Similarity to Ideal Solution(TOPSIS)" as one of the plausible techniques to evaluate a supplier's total performance. A hypothetical case study is presented to demonstrate the applicability of the method.