• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.14 no.1
• /
• pp.89-95
• /
• 1996

As an attempt to apply GPS technique to aerial photogrammetry, an effort is exerted to replace the ground control points that were necessary in the traditional aerial photogrammetry with the aerial control by measuring the position of the camera exposure. In this study, various situations are simulated to test the conditions that affect the positioning of the points in aerial photogrammetry for the use of GPS data. From the result of the simulations, the necessary conditions and the applicable values to produce a 1:1, 000 topographical map were suggested. In the case of a photo block consists of 104 photos, we found a minimum of six ground control points make acceptable accuracy under the condition of below $10\mu{m}$ image positional error and with the ground observations.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.3
• /
• pp.183-192
• /
• 2008

The Purpose of this study is to find the land use condition and housing development of hillside areas in Busan metropolitan city. For this purpose, data of land use in more than meters above the sea level 80m are collected and analysed. The results of this study provide that 44.22% of the area of Busan hold more than meters above the sea level 80m and many aged buildings occupy the hillside areas. Moreover 30.13% of the redevelopment zone in housing redevelopment hold more than meters above the sea level 80m. In consequence, buildings of hillside areas should be maintained and it is necessary to make topographical adaptation plan. Based on these findings this study suggests that introduce the Conjoint Renewal Program.

• Journal of Environmental Science International
• /
• v.5 no.6
• /
• pp.699-712
• /
• 1996

For the efficient control of atmospheric quality, it is so important to predict the influence accurately of which the air pollutant emitted into the atmosphere. Atmospheric dispersion model enables to simulate and grasp the atmospheric condition occurred due to the emission of pollutants. The result of model is largely affected by the amount of emission, the characteristics of physical and chemical process, meteorological input data, and the receptor which the concentration is calculated. The aim of this research, therefore, is to suggest more suitable model in Pusan area than other areas by performing TCM2, CDM2.0 and ISCLT2 models. As the basic work for executing the model, we computed the amount of emission of air pollutants in Pusan at 1992 and analyzed the occurrence frequency of atmospheric stability for recent decade(1985~19941, CDM2.0 showed the similar result relatively with observed value in the case of full year(1992), fall and winter, and ISCLT2 brought more suitable result in spring for Pusan area. As the result of this research, in future, it is necessary for us to develop the numerical model considering the topographical characteristics, to select the proper observation site and to increase the observation site for Pusan.

• Journal of the Korean Geophysical Society
• /
• v.9 no.4
• /
• pp.371-376
• /
• 2006

Digital high resolution cameras are widely available, and are increasingly use in digital close-range photogrammetry. And photogrammetry instruments are developing rapidly and the precision is improving continuously. The building of 3D terrains of high precision are possible and the calculation of the areas or the earthwork volumes have high precision due to the development of the technique of the spatial information system using computer. Using the digital camera which has capacity of keeping numerical value by itself and easy carrying, we analyze the positioning error according to various change of photographing condition. Also we try to find a effective method of acquiring basis data for 3D modeling of high-accuracy in pixel degree through digital close-range photogrammetry with bundle adjustment for digital elevation model generation.

• Journal of Industrial Technology
• /
• v.19
• /
• pp.147-154
• /
• 1999

The soil loss by rainfalls or runoffs has been one of the main environment problems in 20th century. The soil loss cause the various problems those are decreasing of the agricultural productivity, desolating of pasture land and disturbing of water flowing. Therefore, it is very important to measure properly various factors those are affecting to soil loss and to recognize a seriousness of soil loss problem. In this study, we use the USLE(Universal Soil Loss Equation) as a basic approaching way for soil loss analysis in a watershed, and the GSIS(Geo-Spatial Information System) technique is applied to evaluate for factors those are related to the USLE. The results of this study are consisted of three parts those are to build up the various topographical information that is needed for analysis of wide area soil loss by using the USLE, to evaluate the factors those are needed to the USLE, to estimate the soil loss condition of subbasin in the watershed.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.24 no.3
• /
• pp.115-132
• /
• 1996

The purpose of this study is to estimate the soil loss amount with Geographic Information System according to the land use change of Buju mountain area in Mokpo city. To estimate the soil loss, Universal Soil Loss Equation which is the most proper technique to predict soil loss in this site condition is adopted and IDRISI, a raster GIS software, is used. GIS application with USLE is very efficient to estimate soil loss accurately and fastly. In order to decide value and to find application method of USLE factors, we used existing rainfall erosion index, soil erodibility analysis, slope length, slope steepness, vegetation management and practices, which are rated by GIS through the analysis of various studies related USLE. The result of this study was compared with the previous other researches to verify our method of constructing numerical data of USLE's factors. The result of verification of our way showed significance for the soil loss in forest area. But the result of verification for the soil loss in forest area. But the result of verification for the soil loss of cultivated area showed some errors. It seems that this result was due to local variation of topographical map.

• International Journal of High-Rise Buildings
• /
• v.4 no.2
• /
• pp.117-125
• /
• 2015

A vertical city with multifunctional land use turns out to be the most viable solution for an urban condition characterized by increasing density due to population expansion, topographical limitation of buildable land, economic development and the pursuit for collective sustainable living, such as in Hong Kong. This paper presents initial research results from a study on the chronological and typological evolution of tall buildings in the city, from the climate-responsive verandah typology to the mixed-use hyper-commercial podium and residential tower typologies that predominate today, to the ultimate formation of a vertical city. Case studies and surveys have focused on the development of this building typology throughout the decades since the 1920s, substantiating a discussion on the subjective and objective factors contributing to a genesis of the vertical city phenomenon in Hong Kong. The discussion will engage, under the notion of the vertical city, on how residents and visitors adapt to the growing density of the city, and how they accustom themselves to the changing urban morphology over time. Advantages such as high efficiency, spaces savings, time convenience, etc.; and disadvantages such as deficiency in livability, incompatibility of uses, environmental health deficiencies, etc.; serve as a reference for other cities in need of high-density planning due to population and economic growth.

• Journal of architectural history
• /
• v.13 no.4 s.40
• /
• pp.125-138
• /
• 2004

Open-rectangular plan Hanok is one of the major types that compose the urban tissues of Bukchon, a typical traditional residential area in Seoul. Through the comparison of the cadastral map of 1912 and the aerial photograph of 1962, the paper has given the outline of the and the distribution of Open-rectangular plan Hanok at Bukchon. And the paper defines the characteristics of Open-rectangular plan Hanok at Bukchon as followings. First, Open-rectangular plan Hanok at Bukchon is the mutated type of Open-rectangular plan Hanok in Kyong-gi Province. Second, the composition and characteristics of Bakat-chae and outer-courtyard have been changed through the adaptation itself to the compact lots of urban neighborhood. Third, the composition and characteristics of An-chae has not been changed except the inner corner bay, that gives the lights and view to An-bang through the window. And the comparison and observation of four examples, the paper defines the identities of Open-rectangular plan Hanok at Bukchon. The partial transformation comes from the conflicts and adjustments with the structure of alley and the topographical condition of lots.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.507-513
• /
• 1998

In surface grinding, the conditions of the grinding wheel has much more significant effect on the machined workpiece as compared to other metal removal processes. The contact between the grinding wheel and the workpiece introduce heat and resistance, which restrict the self-dressing of the grits and result in burrs cracks on the workpiece. Therefore, before or during the grinding operation, it is necessary to self-dressing the grinding wheel for more accurate performance. In general, however, the choice of the dressing time has made by the operator's own decision or the condition of the workpiece. In this paper, a new method for finding the optimal dressing time of the grinding wheel is proposed. In order to develop a more sophisticated methodology, a non-contacting in-process optical measurement method using a laser beam has been introduced to find the glazing, loading, and spilling of the grinding wheel Simultaneously, a three-dimensional computer simulation of the grinding operation has been attempted based on the contact mechanism between the grinding wheel and the workpiece. The grains of the grinding wheel are simulated and the optimal dressing time is determined based on the amount of grain wear and work surface roughness.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.57 no.1
• /
• pp.45-56
• /
• 2021

In order to understand the tide and current around the sea route of Jinhae and Masan passages, tide measurement and 2D numerical model experiments of tidal current and residual flow were carried out. Tide is composed of 84% of semi-diurnal tide, 11% of diurnal tide and 4% of shallow water tide, respectively. Phase lags of the major components for the tide around the study area have little differences. The flows are reversing on the whole, but have rotational form around Jamdo Island, south of Masan passage in spring tide and Ungdo Island, north of Masan passage in middle and neap tide. Current flows the speed of 50 cm/s in the sea areas near small islands, 5 cm/s in Jinhae harbor, Hangam bay and near Jinhae industrial complex and 20-30 cm/s in Jinhae passage, Budo channel and Masan passage. Tide-induced topographical eddies are formed near small islands, but few eddies exist and the flow rate of less than 5 cm/s tidal residual current formed in Jinhae and Masan passages. The flows in Jinhae and Masan passage give a good condition for a passage into Jinhae and Masan harbor.