• Journal of Korean Society of Transportation
• /
• v.29 no.4
• /
• pp.113-123
• /
• 2011

Traffic signal control is one of the most cost-effective means of improving urban mobility. With the recent progress of ITS (Intelligent Transportation System) and the installation of the real time traffic control systems, traffic signal control is conducted in online and real time. Normally, time-of-day (TOD) signal control is used with the system, but no definite methodology has yet been available for efficient TOD signal planing designing. Such method and process are in need to optimize the traffic signal timing plan. This paper proposes the optimization of TOD signal timings on arterials. The effects of the signal timings from the proposed method were assessed in the field. The proposed includes the methods determining the separation of the TOD break points and the TOD intervals. Those were tested on an arterial consisting of ten coordinated signalized intersections. It was found from the test results that the proposed TOD signal timing plans outperformed the previous signal timings.

• Journal of Auto-vehicle Safety Association
• /
• v.14 no.3
• /
• pp.48-59
• /
• 2022

A V2X system can be a candidate as a means to increase the stability of autonomous vehicles. In particular, in order to implement a Level 4 or higher autonomous driving system, the application of the V2X system is essential. Wireless communication technologies applicable to the V2X system include WAVE and C-V2X. Currently, the V2X service most used by autonomous driving systems is a service that provides signal phase and timing information and since real-time characteristic is a very important, verification of this service must be done. In this paper, we measured the time delay characteristics for providing signal phase and timing information using WAVE and LTE communication, and proposed a TOD-based signal phase and timing information generation method without using V2X communication system. To analyze the time delay characteristics, RTT (Round Trip Time) was measured as a result of the measurement. Average RTT using WAVE communication was 5.84ms and was 104.15ms with LTE communication. As a result of measuring the error between the signal phase and timing information generated based on TOD and the actual traffic light state, it was measured to be -0.284~3.784sec.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.1
• /
• pp.81-92
• /
• 2023

Traffic state classification is crucial for time-of-day (TOD) traffic signal control. This paper proposed a traffic state classification technique applying Deep-Embedded Clustering (DEC) method that uses a high dimensional traffic data observed at all signalized intersections in a traffic signal control sub area (SA). So far, signal timing plan has been determined based on the traffic data observed at the critical intersection in SA. The current method has a limitation that it cannot consider a comprehensive traffic situation in SA. The proposed method alleviates the curse of dimensionality and turns out to overcome the shortcomings of the current signal timing plan.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.6
• /
• pp.101-111
• /
• 2017

This study propose a method to predict the bus arrival time by considering the signal delay time which is an element which can not be considered in the current bus arrival prediction information generation algorithm. In order to consider the signal delay time, travel time is divided into three components: service time, cruising travel time, and signal delay time. Signal delay time was estimated using intersection arrival time and TOD. The results show that most of the errors that occurred in predicting the arrival time are within about 30 seconds. Some of the estimates have large errors due to the nature of this methodology that uses the estimated value of the intersection arrival time rather than the observation value. It is also difficult to predict the arrival time of the express buses using this method. Future studies such as improving this through real-time location information will greatly improve the accuracy of the methodology.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.4D
• /
• pp.469-476
• /
• 2008

Recently, TOD gains popularity as a traffic solution measure of high density urban regeneration projects. The purpose of this study is to investigate traffic impacts of high density TOD projects, and to identify the issues to be resolved. For a case study, it chooses Gangnamgucheong station in Gangnam area served by two subway lines, and designates 400m radius from the station as a site for high-density development. The MOEs chosen for this study is traffic volume, time, distance, speed, and mode share. The SECOM model is adopted for traffic simulation. The analysis results show that high-density TOD is an effective tool for traffic improvement even with only one station area being implemented. It is found that the traffic volume increases near the station in nature where high-density development occurs, but it declines overall in the rest of Gangam area. The total travel time and distance of passenger vehicles decline, meaning that the traffic condition becomes better than before. With regulation on parking supply, the improvement becomes more vivid. In terms of the changes of traffic speed, both alternatives show 4.1% increase in speed, but the difference between alternatives is not quite noticeable because of the induced vehicle demand driven to the streets with improved traffic condition. The mode share changes occur for the benefit of subway ridership, because the study station is equipped with two subway line services. When mixed with parking supply restriction, the impact becomes clearer.

• Journal of Korean Society of Transportation
• /
• v.26 no.3
• /
• pp.31-40
• /
• 2008

There have been a lot of efforts to find more accurate evaluation methods for traffic signal control effectiveness for a long period of time. Nowadays a newly advanced method called HILSS, 'Hardware-in-the-Loop-Simulation System', is used to evaluate the overall traffic control's effectiveness including physical control environments like communication conditions, hardware performance, controller's mechanical operations and so on. In this study, an Online-HILSS model has been developed, which runs on CORSIM(5.0) micro traffic simulation model on-lined to COSMOS. For the verification of the model, three tests are performed as follows; (1) a comparison of TMC's timing plan with the simulated green interval, (2) as a case study, a delay distribution comparison of the online simulation with the CORSIM stand-alone simulation. The result of the first test shows that the model can run the simulation green interval by TMC's timing plan correctly. The result of second test shows that the online simulation of the model brings the same simulation results with the CORSIM offline simulation in case of the same timing plan. These results mean that the online evaluation model could be a reliable tool to measure a real-time signal control effectiveness of a wide area street network with the HILSS method.

• The Journal of the Korea Contents Association
• /
• v.18 no.3
• /
• pp.52-61
• /
• 2018

This research suggested the traffic signal timing calculation model for signal intersections based on sectional travel time. A detection system that collects sectional travel time data such as Urban Transport Information System(UTIS) is applied. This research developed the model to calculate saturation flow rate and demand volume from travel time information using a deterministic delay model. Moreover, this model could determine the traffic signal timings to minimize a delay based on Webster model using traffic demand volume. In micro simulation analysis using VISSIM and its API ComInterface, it checked the saturation conditions and determined the traffic signal timings to minimize the intersection delay. Recently, sectional vehicle detection systems are being installed in various projects, such as Urban Transportation Information System(UTIS) and Advanced Transportation Management System(ATMS) in Korea. This research has important contribution to apply the traffic information system to traffic signal operation sector.

• Journal of Korean Society of Transportation
• /
• v.23 no.8 s.86
• /
• pp.19-29
• /
• 2005

The purpose of this study is to categorize subway station areas in Seoul by rail use characteristic. Most studies have categorized rail-oriented areas, based on land use patterns or/and urban spatial structure in Korea as well as the United States. However, the land use pattern of a subway station area tends to form by the real use of subway users since the latter plays an important role in forming the former. Therefore, the study is expected to contribute to the planning and policy of subway station areas in Seoul by analyzing characteristics of rail use. To achieve the purpose, the study uses a factor analysis for rail use, in terms of time of the day and day of the week. and then conducted a multidimensional scaling method to identify a relation of the real pattern to land use pattern. The results find that the Seoul subway station areas are categorized into residential, commercial and recreational, and office-centered ones. Furthermore, unlike the results of previous studies, the study identifies that many station areas have the mixed characteristics of economic activities. That is, they form more than a centered function such as residential and commercial, residential and office, commercial and office, residential, commercial and office. In addition, the study identifies that there is a close connection between rail use and land one. In short, identification of these mixed characteristics for subway station areas is expected to contribute to developing the planning and development method of TOD in Korea.