• 한국전기전자재료학회논문지
• /
• 제11권4호
• /
• pp.314-320
• /
• 1998

In this study, we have investigated crystallization properties of $Te_x(Sb_{85}Ge_{15})_{100-x}$ (x=0.3, 0.5, 1.0) thin films prepared by thermal evaporation. The change of reflectance according to phase change from amorphous to crystalline phases with annealing and exposure of diode laser is measured b the n&k analyzer and the surface morphology between amorphous and crystalline phase is analyzed by SEM and AFM. The difference in reflectance($\DeltaR$) between amorphous and crystalline phase appears approximately 20% at the diode laser wavelength, 780nm in all prepared films. Especially, the reflectance difference,$\DeltaR$ comes up to about 30% in $Te_{0.5}(Sb_{85}Ge_{15})_{99.5}$ thin film. Also, amorphous-to-crystalline phase change is observed in all prepared films. As a result of the measurement of the reflectance using diode laser, the reflectance is increased in proportion to the laser power and exposure time in all films. As a result of observing each film with the SEM and AFM, the surface morphology of the annealed and the exposed films are evidently increased than those of as-deposited films. The fast crystallization is occurred by increasing in Te content. Therefore, we conclude that the $Te_{0.5}(Sb_{85}Ge_{15})_{99.5}$ and $Te_1(Sb_{85}Ge_{15})_{99}$ thin films can be evaluated as an attractive optical recording medium with high contast ratio and fast erasing time due to crystallization.

• 센서학회지
• /
• 제17권3호
• /
• pp.157-161
• /
• 2008

An optical sensor was developed to detect nanoparticles, turbid materials and microorganisms in water simultaneously. Three different light sources like UV-LED, NIR-LED and laser diode have been employed to develop the optical sensor based on the scattering light and fluorescence light. The sensor system has high selectivity and sensitivity, that it can be used to monitor the quality of drinking water.

• 한국광학회지
• /
• 제21권2호
• /
• pp.74-81
• /
• 2010

WDM-PON 용 저가형 광원으로 유망한 주입 잠금 패브리-페롯 레이저 다이오드의 특성 해석을 위한 모델링 방법을 제시하였다. 해석 방법으로는 시영역 대신호 모델을 이용하였으며, 계산 결과는 기존의 실험 결과와 유사한 경향을 보임을 확인하였다. 이를 토대로 특정한 파라미터를 가지는 레이저 다이오드 구조에서의 단면 반사율에 따른 동작 특성과 디튜닝, 아이 다이어그램등을 모델링 하였다. 특히 단면 반사율의 값에 따른 부모드 억제율 특성 및 디튜닝의 영향을 살펴보았으며, 주입되는 단면의 반사율이 1% 미만으로 유지되어야 안정된 특성을 얻을 수 있음을 확인하였다. 아이 다이어그램의 경우 155 Mbps 급에서는 손쉽게 아이 열림을 얻을 수 있지만, 1.25 Gbps 급에서는 레이저 다이오드의 활성층 두께 등의 파라미터를 적정화해야 적정한 아이특성을 얻을 수 있음을 보였다.

• Journal of the Optical Society of Korea
• /
• 제8권4호
• /
• pp.163-167
• /
• 2004

We propose and demonstrate an external optical modulation method based on TE/TM-mode absorption nulls in a Multiple Quantum Well(MQW) Fabry-Perot laser diode(FP-LD). The center wavelength of the absorption nulls is rapidly shifted to short-wavelength by the small current change(~1mA) in the FP-LD, which can modulate an optical signal with more than 10 dB of extinction ratio(ER). The shift of the center wavelength comes from the refractive index change due to anomalous dispersion and the plasma effect in MQW FP-LD waveguide. Non-inverting and inverting signals are made by TE- and TM-mode absorption nulls at 155.52 Mbps and BERs for the signals are measured.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.579-581
• /
• 2006

Flat panel image display devices such as TFT LCD and PDP have required more large area and high quality control components. To control the qualities of the components, measurements of the flatness of a plate glass has been required. In order to measure the shape of the specular objects, Non-Contact Optical Sensor using Hologram laser unit was proposed. The sensor has a optical system that is composed of a Hologram laser and objective lens. The temperature of the sensor body is controlled by TEC(Thermoelectric Cooler) to maintain the same wavelength of the diode laser. In this research, we proposed the calibration scheme to make sensor real time measuring sensor. From the experimental results we see that the proposed sensor unit can measure the position of the glass surface in rial time.

• 한국광학회지
• /
• 제14권6호
• /
• pp.669-673
• /
• 2003

본 연구에서는 기존의 ridge waveguide laser diode(RWG LD)보다 ridge폭에 따른 측방향 단일모드 특성이 우수하고 planar 화에 유리하며 측방향의 유효 굴절률차를 ridge 구조에 추가로 성장된 InGaAsP층의 두께로 조절이 가능한 Buried RWG LD를제작하였다. 본 연구에서는 Buried RWG LD를 CBE장치로 InGaAs/InGaAsP multiple quantum well(MQW) 에피 웨이퍼를 성장하고, LPE로 재성장하여 B-RWG LD를 제작하였다. 또한 ridge 폭을 5 $\mu\textrm{m}$와 7 $\mu\textrm{m}$로 하여 B-RWG LD를 제작하고 특성을 비교하여 보았다. 제작된 7 $\mu\textrm{m}$ B-RWG LD에서 광출력이 20㎽에 이를 때까지 고차모드 발진에 의한 kink현상이 일어나지 않았으며, 포화 광출력이 80 ㎽ 이상임을 확인하였다. 제작된 B-RWG LD가 측방향 단일모드로 동작함을 확인하기 위해 FFP을 측정한 결과, ridge 폭이 5 $\mu\textrm{m}$일 때는 2.7I$_{th}$ , ridge 폭이 7 $\mu\textrm{m}$일 때는 2.4I$_{th}$ 까지 단일모드로 동작함을 확인할 수 있다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.207-207
• /
• 2010

Both ZnO and GaN have excellent physical properties in optoelectronic devices such as blue light emitting diode (LED), blue laser diode (LD), and ultra-violet (UV) detector. The ZnO/GaN heterostructure, which has a potential to achieve the cost efficient LED technology, has been fabricated by using radio frequency (RF) sputtering, pyrolysis, metal organic chemical vapor deposition (MOCVD), direct current (DC) arc plasmatron, and pulsed laser deposition (PLD) methods. Among them, the PLD system has a benefit to control the composition ratio of the grown film from the mixture target. A 500-nm-thick ZnO film was grown by PLD technique on c-plane GaN/sapphire substrates. The post annealing process was executed at some varied temperature between from $300^{\circ}C$ to $900^{\circ}C$. The morphology and crystal structural properties obtained by using atomic force microscope (AFM) and x-ray diffraction (XRD) showed that the crystal quality of ZnO thin films can be improved as increasing the annealing temperature. We will discuss the post-treatment effect on film quality (uniformity and reliability) of ZnO/GaN heterostructures.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.616-619
• /
• 2003

Photochemical and photothermal effects have correlation with each other and depend on laser wavelength. Multi-scanning laser ablation process of polymer with DPSS(Diode Pumped Solid State) 3rd harmonic Nd:YVO$_4$ laser with wavelength of 355nm is applied to fabricate three-dimensional micro shape. The DPSSL photomachining system can rapidly and cheaply fabricate 2D pattern or 3D shape with high efficiency because we only use CAD/CAM software and precision stages instead of complex projection mask. Photomachinability of polymer is highly influenced by laser wavelength and its own chemical structure. So the optical characteristics of polymers for 355nm laser source is investigated by experimentally and theoretically.

• Medical Lasers
• /
• 제10권2호
• /
• pp.82-89
• /
• 2021

Background and Objectives Due to changes in diet and lifestyle, the number of obese people worldwide is steadily increasing. Obesity has an adverse effect on a healthy life, so it needs treatment and improvement. Research related to this is continuously being conducted. Materials and Methods The laser system to compact designed using 808 nm laser diode and Neodymium Yttrium orthovanadate generates a 1064 nm wavelength, the periodically polarized nonlinear crystal pumping laser beam. The pulsed 1064 nm wavelength beam passing through the AO Q-switch is used as the pumping light of the nonlinear optical crystal and is irradiated to the periodic polarized nonlinear optical crystal with a quasi-phase matching period. Nonlinear optical crystals use an oven to control the temperature to generate the desired 1980 nm and 2300 nm wavelengths. Results The 1980 nm and 2300 nm wavelengths generated by temperature control of nonlinear optical crystals are effective for lipolysis. A fiber catheter was used so that the laser could be directly irradiated to the fat cells. In particular, the new wavelength (1980 nm, 2300 nm) can increase the fat reduction effect with low energy (1.3 W). When a laser with a combination wavelength of 1980 nm and 2300 nm was used, an average lipolysis effect of 20% was obtained. Conclusion A mid-infrared lipolysis laser system with excellent absorption of fat and water has been developed. We conducted a princlinical study to confirm the efficacy and safety of the lipolysis laser system, and obtained good results for lipolysis with low energy.

• 융합신호처리학회논문지
• /
• 제22권3호
• /
• pp.104-109
• /
• 2021

본 논문에서는 self-seeding FP-LD (Fabry Perot Laser Diode)를 이용하여 WDM-PON (Wavelength Division Multiplexing - Passive Optical Network)에서 사용될 수 있는 새로운 파장 가변 광원의 가능성을 검증한다. 파장 가변 광원을 이용한 WDM-PON의 기존 구현은 AWG (Arrayed Waveguide Grating) 소자의 중심 파장과 광원의 중심 파장을 세밀히 정렬해 주어야 하는 단점이 발생한다. 그러나, 본 논문에서 제안하는 파장 가변 광원은 매우 간단한 구조로 구성되며, 가변 파장이 AWG의 중심 파장에 자동 정렬되는 장점을 갖는다. 구현된 파장 가변 광원은 약 14 nm 정도 이상의 파장 가변 대역을 보였고, 상대적 세기 잡음, RIN (Relative Intensity Noise)은 최대 약 -124dB/Hz로 나타났으며, 외부 변조기를 통해 변조한 결과 10Gb/s 신호에 대한 변조 가능성을 확인 할 수 있었다.