• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.3066-3068
• /
• 2005

Noise can make surrounding environments inferior and deteriorates operation efficiency, and it can bring aural damage as well as give a person psychological stress. Therefore, necessity of study about noise control is increased for better labor conditions and agreeable habitat. In this paper, implementation of active mufflers using a stable IIR adaptive filters is presented. The IIR filter structure is more effective when acoustic feedback exists, but the adaptive IIR filters could be unstable when the filter algorithm is not yet converged. A stabilizing process for adaptive IIR filter is introduced in this paper. Experiments using a TMS320C32 digital signal processor have performed to show the effectiveness of a proposed algorithm.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.64-68
• /
• 1997

In this paper, a controller for the linear motor with high speed and stiffness is implemented using SERCOS interface which is a real time communication protocol between the numerical controller(NC) and the motor driver. The proposed controller is mainly composed of current, speed, and position controller, which are designed using the 32-bit DSP(TMS320C31), a high-integrated logic device (EPM7128), and Intelligent Power Module(IPM) to enhance reliability and compactness of the system. The experimental results show the effective performance of the proposed controller for he linear motor with high speed and stiffness.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.315-318
• /
• 2001

In this paper recommends the development of automated silo dry & storage system. Most of existing round shaped iron silo arc used for only storage after dry and have many problems in storing. So We have developed an automated dry system which used the previously equipped silo and enables it to be used for storage after dry. The system features high frequency-resistance water sensor in Hopper scale that is in general use within the country its silo that is manufactured by the nerve DSP(TMS320C32) system water compensator and visualization that is finally realized with a personal computer.

• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2748-2750
• /
• 1999

This Paper describes the design of an induction motor control using the TMS320C32 Digital Signal Processor and the ADMC201 motion coprocessor. Presented hardware architecture can be used for several industry applications with wide range of speed control, e.g. elevator and cranes application, servo motor, electrical vehicles. The main purpose of the paper is demonstration of the implementation and maximum utilization of the ADMC201 motion coprocessor in digital vector control system for AC drives.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2671-2673
• /
• 2004

Noise can make surrounding environments inferior and deteriorates operation efficiency, and it can bring aural damage as well as give a person psychological stress. Therefore, necessity of study about noise control is increased for better labor conditions and agreeable habitat. In this paper, implementation of active mufflers using active noise control techniques is presented. The LMS algorithm is used for adaptive filter algorithms. Computer simulations and experiments using TMS320C32 digital signal processor have performed to show the effectiveness of a proposed algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.111.5-111
• /
• 2001

This paper places great importance on performance improvement of Galvanometer system used for laser display, laser processing, marking system. Fundamentally, we implement control system, on that assumption that laser source exists, and design basic PID controller. Hardware is composed of DSP(TMS320C32) chip, and the position compensation of Galvanometer is performed by using 16-bit A/D and D/A converter. Through frequency response analysis and simulation, the attribute of plant and controller is captured and then, total system is analyzed. We deliberate noise problem that can be caused from analog signal as driving signal for Galvanometer.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.167-169
• /
• 2001

In this paper, a controller design for high speed and stiffness linear motor is implemented. The designed controller is mainly composed of speed and current controller, which are carried out by the high-speed digital signal processor(DSP). In addition the PWM inverter is controlled by space voltage PWM method. This system is implemented by using 32-bit DSP(TMS320C31), a high-integrated logic device(EPM7128), and IPM(Intelligent Power Module) for compact and powerful system design. The experimental results show the effective performance of controller for high speed and stiffness linear motor.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.969-972
• /
• 2000

In this paper, a controller design for brushless linear motor is proposed. The designed controller is mainly composed of speed and current controller, which are carried out by the high-speed digital signal processor(DSP). In addition the PWM inverter is controlled by space voltage PWM method. This system is implemented using by 32-bit DSP(TMS320C31), a high-integrated logic device(EPM7128), and IPM(Intelligent Power Module) for compact and powerful system design. The experimental results show the effective performance of controller for the brushless linear motor.

• Proceedings of the IEEK Conference
• /
• 2002.06c
• /
• pp.83-86
• /
• 2002

This paper intends to provide convenience to the disabled, losing the use of their limbs, through voice recognition technology. The voice recognition part of this system recognizes voice by DTW (Dynamic Time Warping) Which is most Widely used in Speaker dependent system. Specially, S/N rate was improved through Wiener filter in the pre-treatment phase while considering real environmental conditions; the result values of 12th order feature pattern per frame are extracted by DTW algorithm using LPC and Cepsturm in feature extraction process. Furthermore, miniaturization is pursued using TMS320C32, 71's the floating-point DSP, for the hardware part. Currently, 90% of hardware porting has been completed, but we can confirm that the recognition rate was 96% as a result of performing the DTW algorithm in PC.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.431-434
• /
• 2002

This paper presents an implementation of direct torque control(DTC) of Reluctance Synchronous Motor(RSM) with an efficiency optimization using the 32bit DSP TMS320C31. The influence of iron loss can not neglected as high speed and precision torque control of RSM, so the optimal current ration between torque current and exiting current analytically derived to drive RSM at maximum efficiency For RSM, torque dynamics can be maintained even with controlling the flux level because the generated torque is direct]y proportional to the stator current. The experimental results for an RSM are presented to validate the applicability of the proposed method. The developed control system is shown high efficiency features with 1.0Kw RSM having 2.57 ratio of d/q reluctance.