• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.3
• /
• pp.386-393
• /
• 2011

Three trials were conducted to determine the available energy of different wheat screening varieties collected from different locations of Khorasan in Iran. In experiment 1, chemical composition and the nitrogen corrected true metabolisable energy (TMEn) were evaluated. A precision-fed rooster assay was used, in which, each wheat screening sample was tube fed to adult roosters, and the excreta were collected for 48-h. In Exp. 2 and 3, five and two wheat screening verities-based diets with or without xylanase and phytase were fed to 16-day old battery reared chicks respectively, and total feed consumption and excreta were measured during next three days. The variable nature of wheat screening varieties led to significant differences in mean TMEn values (p<0.01). The TMEn values of samples determined with adult roosters varied by ${\pm}5.03%$ of the mean value ($3,097.65{\pm}49.32\;kcal/kg$) and ranged from 2,734.90 to 3,245.12 kcal/kg. There was a significant correlation (p<0.05) between crude fiber (CF), neutral detergent fiber (NDF), and acid detergent fiber (ADF) with TMEn, and the greatest correlation coefficient was observed between NDF and TMEn (r = -0.947; p<0.001). The optimal equation in terms of $R^2$ from using a single chemical analysis was obtained with NDF: TMEn = 4,152.09-27.80 NDF ($R^2$ = 0.90, p<0.0001), and the TME prediction equation was improved by the addition of the crude protein (CP) and ASH content to sequential analysis: TMEn = 3,656.97-28.65 NDF+32.54 CP+38.70 ASH ($R^2$ = 0.98, p<0.0001). The average AMEn values of 5 and 2 wheat screening varieties determined with young broiler chickens were $2,968.41{\pm}25.70\;kcal/kg$ and $2,976.38{\pm}8.34\;kcal/kg$ in Exp. 2 and Exp. 3, respectively. Addition of xylanase and phytase to wheat screenings resulted in significant (p<0.01) improvement in AMEn by 4.21 and 2.92%, respectively.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.4
• /
• pp.1545-1551
• /
• 2015

Purpose: Rectal cancers with high microsatellite-instable have clinical and pathological features that differentiate them from microsatellite-stable or low-frequency carcinomas, which was studied rarely in stage II rectal cancer, promoting the present investigation of the usefulness of microsatellite-instability status as a predictor of the benefit of adjuvant chemotherapy with fluorouracil in stage II rectal cancer. Patients and Methods: Data of 460 patients who underwent primary anterior resection with a double stapling technique for rectal carcinoma at a single institution from 2008 to 2012 were retrospectively collected. All patients experienced a total mesorectal excision (TME) operation. Survival analysis were analyzed using the Cox regression method. Results: Five-year rate of disease-free survival (DFS) was noted in 390 (84.8%) of 460 patients with stage II rectal cancer. Of 460 tissue specimens, 97 (21.1%) exhibited high-frequency microsatellite instability. Median age of the patients was 65 (50-71) and 185 (40.2%) were male. After univariate and multivariate analysis, microsatellite instability (p= 0.001), female sex (p<0.05) and fluorouracil-based adjuvant chemotherapy (p<0.001), the 3 factors were attributed to a favorable survival status independently. Among 201 patients who did not receive adjuvant chemotherapy, those cancers displaying high-frequency microsatellite instability had a better 5-year rate of DFS than tumors exhibiting microsatellite stability or low-frequency instability (HR, 13.61 [95% CI, 1.88 to 99.28]; p= 0.010), while in 259 patients who received adjuvant chemotherapy, there was no DFS difference between the two groups (p= 0.145). Furthermore, patients exhibiting microsatellite stability or low-frequency instability who received adjuvant chemotherapy had a better 5-year rate of DFS than patients did not (HR, 5.16 [95% CI, 2.90 to 9.18]; p<0.001), while patients exhibiting high-frequency microsatellite instability were not connected with increased DFS (p= 0.696). It was implied that female patients had better survival than male. Conclusion: Survival status after anterior resection of rectal carcinoma is related to the microsatellite instability status, adjuvant chemotherapy and gender. Fluorouracil-based adjuvant chemotherapy benefits patients of stage II rectal cancer with microsatellite-stable or low microsatellite-instable, but not those with high microsatellite-instable. Additionally, free of adjuvant chemotherapy, carcinomas with high microsatellite-instable have a better 5-year rate of DFS than those with microsatellite-stable or low microsatellite-instable, and female patients have a better survival as well.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.2
• /
• pp.707-712
• /
• 2014

Purpose: Anastomotic leakage (AL) is associated with high morbidity and mortality, high reoperation rates, and increased hospital length of stay. Here we investigated the risk factors for AL after anterior resection for rectal cancer with a double stapling technique. Patients and Methods: Data for 460 patients who underwent primary anterior resection with a double stapling technique for rectal carcinoma at a single institution from 2003 to 2007 were prospectively collected. All patients experienced a total mesorectal excision (TME) operation. Clinical AL was defined as the presence of leakage signs and confirmed by diagnostic work-up according to ICD-9 codes 997.4, 567.22 (abdominopelvic abscess), and 569.81 (fistula of the intestine). Univariate and logistic regression analyses of 20 variables were undertaken to determine risk factors for AL. Survival was analysed using the Cox regression method. Results: AL was noted in 35 (7.6%) of 460 patients with rectal cancer. :Median age of the patients was 65 (50-74) and 161 (35%) were male. The diagnosis of AL was made between the 6th and 12th postoperative day (POD; mean 8th POD). After univariate and multivariate analysis, age (p=0.004), gender (p=0.007), tumor site (p<0.001), preoperative body mass index (EMI) (p<0.001), the reduction of TSGF on 5th POD less than 10U/ml (p=0.044) and the pH value of pelvic dranage less than or equal to 6.978 on 3rd POD (p<0.001) were selected as 6 independent risk factors for AL. It was shown that significant differences in survival of the patients were AL-related (p<0.001), high ASA score related (p=0.036), high-level EMI related (p=0.007) and advanced TNM stage related

• Journal of Life Science
• /
• v.27 no.11
• /
• pp.1269-1275
• /
• 2017

Tenebrio molitor samples were investigated as novel biomaterials and sources of food in several recent studies. However, the insects' effects on hair growth were not sufficiently researched. To develop novel and natural materials for preventing alopecia and promoting hair growth, this study investigated the antioxidant activities and hair-growth promotion effects of TMEs. To determine the antioxidant activities, the TMEs' DPPH radical- and nitrite-scavenging activities were examined. To determine hair-growth promotion effects, proliferations of human dermal papilla cells (DPCs) and the murine fibroblast cell line NIH3T3 were evaluated by using an MTS assay. In addition, estimations were made for cell viabilities against cell death induced by dihydrotesterone (DHT) in DPCs and inhibitory effects against potassium channel blocking induced by tolbutamide (TBM) in NIH3T3 cells. The DPPH radical scavenging activity was 81.17%, and the nitrite scavenging activity was 43.69%; the activities were similar to the activities of blueberry extracts. Moreover, the TMEs promoted the proliferation of human DPCs and NIH3T3 cells, which were concentrated dependently. The TMEs prevented not only DHT-induced DPC cytotoxicity but also TBM's action as a potassium channel blocker in NIH3T3 cells. The results suggested that TME could be used as a functional therapeutic alopecia reagent, to prevent hair loss and to promote hair growth.

• Korean Chemical Engineering Research
• /
• v.57 no.6
• /
• pp.749-757
• /
• 2019

Methyltrimethoxysilane (MTMS) and trimethylethoxysilane (TMES) as starting materials were dissolved in various types of solvents, and hydrolysis with water and polycondensation reaction were carried out using various types of catalysts to prepare non-fluorinated water-repellent coating solutions. The coating solutions were spin-coated on cold-rolled steel sheets, and thermally cured to prepare water-repellent coating films. The effect of types of catalysts and solvents on the water repellency of the resulting coating films was investigated during this process. When hydrochloric acid and nitric acid, which are strong acids, were used as catalysts, the solutions showed a white opaque state due to the aggregation of siloxane polymers. On the other hand, when acetic acid, phosphoric acid, and oxalic acid, which are weak acids, were used, they were in a stable and transparent state without precipitation. As a result, the contact angles of the coated films, prepared from hydrochloric acid and nitric acid, were $58^{\circ}$ and $92^{\circ}$, respectively, showing low water repellency. On the other hand, when acetic acid, phosphoric acid, and oxalic acid were used, the contact angles of the coated films were $101^{\circ}$, $103^{\circ}$ and $116^{\circ}$, respectively, showing high water repellency. In addition, when isopropanol and ethanol were used as solvents, phase separation occurred in the solutions due to the aggregation of siloxane polymers. On the other hand, when methanol, ethyl acetate, and methyl ethyl ketone were used as solvents, the solutions were transparent and showed a stable state without sedimentation.

• Korean Chemical Engineering Research
• /
• v.57 no.2
• /
• pp.177-184
• /
• 2019

Non-fluorinated water repellent coating solutions were obtained using methyltrimethoxysilane (MTMS) and trimethylethoxysilane (TMES) as precursors. The solutions were spin-coated on a cold-rolled steel sheet and cured thermally to prepare water repellent coating films. During this process, the effect of molar ratio of TMES/MTMS was studied for the hydrophobic properties of the coating films. Hydrophobic properties of coating films were characterized using contact angle measurement, surface morphology analysis and infrared spectroscopy. When the molar ratio of TMES/MTMS was varied from 0 to 30, the contact angle of the un-coated cold-rolled steel sheet was $30^{\circ}$, whereas when the molar ratio of TMES/MTMS was 1, the contact angle increased to $104^{\circ}$ and water repellency was significantly improved. In the case of TMES/MTMS molar ratios of 10, 15, 25 and 30, the contact angles of coating films showed $109^{\circ}$, $114^{\circ}$, $117^{\circ}$ and $144^{\circ}$, respectively. At this time, the hydrophobicity of the coating films was improved by the increase of the surface roughness and the content of the methyl component at the coating surface. In particular, when the molar ratio of TMES/MTMS was 30, the overall surface roughness was greatly increased due to the presence of surface particles as well as the water repellency due to methyl groups of TMES, resulting in super hydrophobicity of $144^{\circ}$.

• Design & Manufacturing
• /
• v.15 no.2
• /
• pp.11-16
• /
• 2021

Recently, three-dimensional (3D) cell culture systems, which are superior to conventional two-dimensional (2D) vascular systems that mimic the in vivo environment, are being actively studied to reproduce drug responses and cell differentiation in organisms. Conventional two-dimensional cell culture methods (scaffold-based and non-scaffold-based) have a limited cell growth rate because the culture cannot supply the culture medium as consistently as microvessels. To solve this problem, we would like to propose a 3D culture system with an environment similar to living cells by continuously supplying the culture medium to the bottom of the 3D cell support. The 3D culture system is a structure in which microvascular structures are combined under a scaffold (agar, collagen, etc.) where cells can settle and grow. First, we have manufactured molds for the formation of four types of microvessel-mimicking chips: width / height ①100 ㎛ / 100 ㎛, ②100 ㎛ / 50 ㎛, ③ 150 ㎛ / 100 ㎛, and ④ 200 ㎛ / 100 ㎛. By injection molding, four types of microfluidic chips were made with GPPS (general purpose polystyrene), and a 100㎛-thick PDMS (polydimethylsiloxane) film was attached to the top of each microfluidic chip. As a result of observing the flow of the culture medium in the microchannel, it was confirmed that when the aspect ratio (height/width) of the microchannel is 1.5 or more, the fluid flows from the inlet to the outlet without a backflow phenomenon. In addition, the culture efficiency experiments of colorectal cancer cells (SW490) were performed in a 3D culture system in which PDMS films with different pore diameters (1/25/45 ㎛) were combined on a microfluidic chip. As a result, it was found that the cell growth rate increased up to 1.3 times and the cell death rate decreased by 71% as a result of the 3D culture system having a hole membrane with a diameter of 10 ㎛ or more compared to the conventional commercial. Based on the results of this study, it is possible to expand and build various 3D cell culture systems that can maximize cell culture efficiency by cell type by adjusting the shape of the microchannel, the size of the film hole, and the flow rate of the inlet.

• Science of Emotion and Sensibility
• /
• v.25 no.1
• /
• pp.79-90
• /
• 2022

IThe perception of sub-second duration through the visual sensory system is affected by non-temporal characteristics (factors other than the duration of the stimulus). However, studies have shown that if distance information is abundant and size constancy maintained, the duration of the target is constantly perceived. The current study examined the relationship between size and time perception constancy in a three-dimensional environment with limited distance information. A device was constructed to limit the participants' bilateral and monocular cues. This prevented participants from maintaining size constancy, resulting in size illusions that could not accurately perceive physical size. In Experiment 1, the size of the physical stimulus of reference and test stimuli were the same at all viewing distances. The results suggest that, despite the same physical size, stimuli with close observations were perceived to be greater and lasted longer. In Experiment 2, the retinal size of the reference stimuli and test stimuli was controlled equally at all viewing distances. As a result, although the physical size of the stimuli increased as the observation increased, the perceived size of all the stimuli was the same. Therefore, the duration of the target was constantly perceived at all viewing distances. The results of this study demonstrate that even when distance information is limited, time perception is affected by the perceived size of the object. It also suggests that when rich distance information exists, the duration of the object can be constantly perceived even if the observation distance varies.

• Microbiology and Biotechnology Letters
• /
• v.34 no.4
• /
• pp.342-351
• /
• 2006

The aim of this study was to survey susceptibilities of Escherichia coli and Klebsiella pneumoniae isolates against cefotaxime and to determine the prevalences of CTX-M type extended-spectrum $\beta$-lactamases (ESBLs) producing E. coli and K. pneumoniae in Korea. During the period of February to July, 2005, 153 E. coli and 52 K. neumoniae isolates were collected from 2 hospitals in Busan. Antimicrobial susceptibilities to cefotaxime were tested by the disk diffusion method. ESBL production of E. coli and K. pneumoniae was determined by the double disk synergy test. MICs of $\beta$-lactam antibiotics were determined by the agar dilution method. Blac$_{CTX-M}$ genes of the organism were detected by PCR. Among 153 isolates of E. coli and 52 isolates of K. neumoniae, 27 (17.6%) and 25 (48.0%) were intermediate or resistant to cefotaxime, respectively. Twenty-three (15.0%) isolates out of 153 E. coli and 13 (25.0%) out of 52 K. neumoniae isolates showed positive results for ESBL by the double disk synergy test. Twenty isolates out of 23 ESBL producing E. coli and 12 out of 13 ESBL producing K. neumoniae isolates harbored biacTx-M gene,11 of ESBL producing E. coli and 12 of ESBL producing K. neuinoniae isolates harbored bla$_{CTX-M}$ gene, 11 of the ESBL producing E. coli and 2 of ESBL producing K. neumoniae isolates harbored bla$_{TEM}$ gene, and 1 of the ESBL producing E. coli and 12 of ESBL producing K. neumoniae isolates harbored bla$_{SHV}$ gene. E. coli and K. neumoniae isolates producing CTX-M-type ESBLs were not uncommon in Korea. It is thought that continuous survey are necessary for inspecting the spread and novel variants of CTX-M-type ESBL genes. Further me]'e investigation and research on ESBL producing strains are needed in order to prevent the spread of resistant bacteria.

• Journal of Animal Science and Technology
• /
• v.54 no.2
• /
• pp.111-124
• /
• 2012

Feeding trial was conducted with 80 Hanwoo steers (7.5 months of age, 204.4 kg body weight) for 680 days from growing period to late fattening period to examine the feeding value of whole crop barley silage TMR (BS-TMR) and whole crop rye silage TMR (RS-TMR) on body gain, feed cost, slaughter characteristics and quality characteristics of $longissimus$ $dorsi$ muscle. Dietary treatments were conventional separate feeding of concentrate and rice straw (control), feeding BS TMR up to middle fattening period and same diet as for control during late fattening period (BS-TMR I), feeding BS-TMR for whole experimental period (BS-TMR II), feeding RS TMR up to middle fattening period and same diet as for control during late fattening period (RS-TMR I) and RS TMR for whole experimental period (RS-TMR II). Sixteen castrated calves were assigned to each treatment (4 pens, 4 heads per pen). Pens in each treatment were randomly distributed. Feeding both BS silage TMR and RS silage TMR slightly increased body gain of Hanwoo steers at the stages of growing and early fattening, and increased (P<0.0001) at middle fattening compared to feeding control diet while control diet tended to increase body gain at late fattening stage compared to feeding BS-TMR I, BS-TMR II and RS-TMR I diets. Total body gain was slightly increased in Hanwoo steers fed both I and II for BS and RS TMR compared to that in control diet. Feed cost per kg gain per head was relatively low in the Hanwoo steers fed silage TMRs to that fed control diet. Carcass weight, back fat thickness and $longissimus$ $dorsi$ area of Hanwoo steers tended to increase but lowered (P<0.047) yield index by feeding silage TMRs. Feeding BS TMR slightly decreased marbling score but no difference was found in the number of head over grade 1 between diets. Control diet tended to improve yield grade compared to silage TMRs. Chemical composition, water holding capacity, drip loss, cooking loss and pH, color and fatty acid composition of $longissimus$ $dorsi$ were not affected by experimental diets and feeding duration of silage TMRs. Shear force, however, was increased (P<0.046) by silage TMRs without difference between them compared to control diet. Based on the results of the current study, BS TMR and RS TMR could improve body gain and reduce feed cost without deteriorating meat quality compared to separate feeding of concentrate and rice straw. Overall feeding value was similar between BS TMR and RS TMR.