• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.5
• /
• pp.405-414
• /
• 2009

This paper proposed a methodology based on ultrasonic diffraction technique to inspect the depth of a crack initiated from a notch of CT specimen by fatigue test, and its usefulness was verified by experiments. Especially, in order to identify accurately the diffractive waves from the crack tip in the situation where there are extra diffractive elements such as a notch, we have tried imaging by transducer scan and analyzed the propagation path of diffracted wave. Two specimens with and without a crack were experimented. Higher frequency and larger refractive angle of transducer showed a tendency to decrease the error in the measurements, and the measured crack depth showed an error less than 0.38 mm in case of 4 MHz $60^{\circ}-60^{\circ}$. The proposed methodology is applicable to weak diffractive sources, and so that it would be useful to inspect micro cracks and for their depth sizing.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.4
• /
• pp.114-120
• /
• 2008

XLPE cable is using insulator for Cross Linked Polyethylene(XLPE), because insulation Performance is superior and easy comparatively. Need systematization of accident transaction for electrical equipment accident, It is no disposal standard for defect of manufacture and second to accidents. in this paper deals with the change of XLPE cable insulation. To understand the electrical properties of XLPE insulation. Made of XLPE block sample, Penetration fracture Sample and flashover sample. Ogura needles having tip radius of $10[{\mu}m]$ were inserted into each sample. AC voltage of 1[kV/sec] increased at 60[Hz] were apple to breakdown sample and flashover sample. AC voltages of 12[kV], 17[kV] at 60[Hz] were a lied to XLPE block sample. The electrical properties of specimens were measured were measured from initiation of tree and breakdown to their characteristics were analyzed.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.5
• /
• pp.88-96
• /
• 2017

As a part of the development procedures of scramjet engine with a regenerative cooling system, this experiment was performed using air-assist type injectors for scramjet engine. Two types of injectors were used in this experiment with the 90 and 60 degrees of the injection angle to the main flow. Mie-scattering was used for spray visualization and PDPA was used for the measurement of the atomization characteristics. It was found that increasing the pressure of supplied gas and the distance from nozzle tip led to the enhancement atomization characteristics and the injector with 60 degrees injection angle has better atomization characteristics than 90 degrees injector.

• Journal of the Korean Chemical Society
• /
• v.18 no.6
• /
• pp.400-407
• /
• 1974

Steady-state anodic and cathodic polarization curves were developed for the Al electrode in 60 mole %$AlCl_3$-40 mole % NaCl at $180^{\circ}C$$453^{\circ}K$). Ohmic resistance contributed substantially to the anodic polarization at current densities greater than 50 mA/$CM^2$ even with capillary tip placed close to the electrode. This could not be rationalized from the resistivity of the melt, which would lead to a much smaller polarization. It was therefore concluded that a layer of high resistance $AlCl_3$ (or $AlCl_3$-rich melt) formed close to the anode surface. From the IR-corrected anodic Tafel and Allen-Hickling plots an apparent anodic charge-transfer coefficient of ${\alpha}_a$ = (2.3 RT/F)(d log i/d${\eta}$) = $1.5{\pm}0.25$ was obtained. At cathodic current densities greater than approximately 30 mA/$cm^2$, slow ion diffusion and dendrite growth both interfered with the measurement of kinetic parameters.

• Journal of Korean Vacuum Science & Technology
• /
• v.4 no.4
• /
• pp.102-106
• /
• 2000

We report scanning force microscope (SFM) observations of enhanced calcite dissolution in aqueous solution due to mechanical stimulation induced by the SFM tip. Images and mechanical treatment were performed in saturated ($\geq$ 60 ${\mu}{\textrm}{m}$) CaCO$_3$ solution adjusted to pH~9. Small area scans of monolayer steps significantly increased the step velocity in the scanned area (in the direction corresponding to dissolution) when the applied contact force is above about 160 nN fer the tips employed. The step velocity could be increased at least an order of magnitude by scanning at even higher contact forces (e.g.,270nN). This enhancement is a function of step orientation relative to the calcite lattice. Indentations near preexisting steps also locally enhance the step velocity. We present evidence that the higher dissolution rates are caused by stress-induced increases in the rate of double-kink nucleation.

• Journal of Oral Medicine and Pain
• /
• v.23 no.4
• /
• pp.327-341
• /
• 1998

Aims : The purpose of this study was to investigate whether there are any changes in taste sensitivity with advancing age and to see if smoking or oral hygiene can affect the taste sensitivity. Method : Nine hundred and thirty four subjects(458 male and 476 females) were included for the study and they were categorized into 4 age groups( under 20, 20 to 39, 40 to 59, and over 60 age group ). The electrical taste thresholds were measured using an electrogustometer for the 4 different sites in the oral cavity, I.e., tongue tip, tougue alteral, circumvallate papilla, and soft palate. Results : The elctrical taste thresholds were significantly incresed with advancing age in both gender, but the pattern of change is moere abrupt in female after 40. There were not significant differences in electrical taste threshold between smoking and non-smoking people. Taste thresholds were significantly lower in the groups with higher frequency of daily toothbrushing than the groups with lower frequency Conclusion : The electrical taste threshold is increased with aging. It is not influenced by smoking but by toothbrushing.

• Journal of Welding and Joining
• /
• v.26 no.3
• /
• pp.51-60
• /
• 2008

This paper is to evaluate fracture characteristics of API 2W Gr.50 TMCP steel weldment typically applied for offshore structures, with the focus on the influence of heat input arising from flux cored arc welding. Based on the results and insights developed from this study, it is found that the toughness for both CTOD and impact exhibits a tendency to decrease as the weld heat input increases. The reheated zone of weldmetal exhibit lower hardness than solidified zone and microstructure that are liable to affect the toughness are acicular ferrite and martensite-austenite constituents (M-A). In particular, M-A is a more effective micro-phase for CTOD toughness than impact toughness.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.75-80
• /
• 2001

The present article deals with the numerical calculations for the inter-spray impingement of two diesel sprays under the conditions of high injection pressure. The Wave model involving the cavitation effect inside the nozzle was used for describing the atomization process. In particular, a hybrid model for drop collision was newly suggested in this study and compared with the O'Rourk's model, which has been widely used for diesel sprays. The impingement angles of 60 and 90 degrees were considered for simulation of non-evaporative diesel sprays. The calculated results for tip penetration were compared with experimental data and the Sauter Mean Diameter(SMD) characteristic was analyzed. It was concluded that the hybrid model slightly shows better agreement with experimental data than the O'Rourke's model. However, the more elaborate study should be needed for better understanding of spray-to-spray impingement phenomena.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.1
• /
• pp.3-8
• /
• 2012

In an attempt to improve adhesion strength between glass and metal due to use of Pb-free solder as a sealant between glass and metal in the manufacturing process of vacuum insulation window glass to maintain the vacuum volume, ultrasonic energy is often applied during the process of Pb-free sealing. In this study, we propose an ultrasonic vibrator with a 4 mm end tip radius which performs resonance frequency of 60 kHz and 14 um or higher vibration displacement. A frequency variation due to applied pressure on piezo disks, which was excluded in the computer simulation, was verified experimentally, and we have demonstrated a 17 um vibration displacement at 50 V input through the performance test of a vibrator constructed with our specification.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.4
• /
• pp.60-65
• /
• 2001

Thermal spray coating is formed by a process in which melted particles flying with high speed towards substrate, then crash and spread on the substrate surface cooled and solidified in a very short time, Stacking of the particles makes coating. In this study, the exfoliation of $Al_2$O$_3$ and Ni-4.5wt.%Al thermally sprayed coating which were deposited by an atmospheric plasma spray apparatus are investigated using an AE method. A tensile test is conducted on notch specimens in a stress range below the elastic limit of substrate. The wave forms of AE generated from the three coating specimens can be classified by FFT analysis into two types which low frequency(type I waveform is considered to corresponds exfoliation of coating layers and type II waveform corresponds the plastic deformation of notch tip or the resultant fracture of coating. The fracture of the coating layers can estimate by AE event and amplitude, because AE features increase when the deformation generates.