• Journal of Korean Society for Quality Management
• /
• v.46 no.2
• /
• pp.311-326
• /
• 2018

Purpose: Using international specifications, this study classified international standards and automobile manufacturers' test items based on the kind of test used and determined the test order for ISO 16750. Methods: The effects of international standards' environmental factors were examined, based on the major impacts of the product and the results of product failure. Automobile manufacturers' test items were compared with the test item in the ISO 16750. A generic algorithm was then used to determine the test sequence for ISO 16750. Results: International standards and automobile manufacturers' common test items were classified. The test sequence of ISO 16750 was determined for five cases. Conclusion: Although mechanical and environmental tests share many common features, there are differences in the details of the tests. There is a common sequence of tests, but weights are allocated tests differently.

• Journal of the Korean Society of Systems Engineering
• /
• v.6 no.1
• /
• pp.25-32
• /
• 2010

The Test and Evaluation (T&E) process is an integral part of the Systems Engineering Process. The purpose of Test and Evaluation (T&E) in a system development is to identify the areas of risk to be reduced or eliminated. In this study, when develop aircraft of Civil Aviation with development experience of Military Aircraft, it is that establish Test and Evaluation process. Test and Evaluation for KC-100 small aircraft development can divide to certification test and development test. Certification test is proved compliance about Korea Airworthiness standard (KAS Part 23), through Development Test verify required performance of aircraft. These Test and Evaluation Process is more efficient and optimized.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.371-376
• /
• 2003

The objective of this paper is to compare the site-to-site variability of ISO 10844 pass-by-noise test sites. In order to investigate the site-to-site variance of test surfaces, European commercial tires are tested at seven different test sites. Three Korea test sites and four Europe test sites are selected.. The pass by noise test is executed according to a 2001/43/EC regulation. A]though the ISO surface has a very specific track composition, it does not reduce the variation of pass-by-noise measurements over the surface of test sites. This paper shows that the test results of pass-by-noise level are different depending on the test sites. The correlation obtained in this work is able to predict the pass by noise level for certain test site using the data measured from another test site. 17he prediction value is range with an error within 1dB(A).

• Journal of the Korean Society for Railway
• /
• v.8 no.1
• /
• pp.101-109
• /
• 2005

Roller test rig is the test facility for acquiring the data related dynamic characteristics of rolling stocks handily. The test method using roller test rig could be convenient to Set information about hunting and others rather than using field test. However, adopting this method brings about the inconvenient calibration process for measured data. This kind of additional effort results from the difference of contact condition between field test and test roller rig. In this paper, the numerical approach is used to get the amount of calibration. The analysis results of the field test are compared with results of the roller test rig to know what kind of alternation happens according to the change of contact condition.

• Journal of Wind Energy
• /
• v.3 no.1
• /
• pp.61-67
• /
• 2012

The loading test of wind turbine pitch and yaw bearings have been conducted using special test rig designed for the test of large slewing bearings. Test type was fatigue test that applied fatigue load to each bearing and followed the defined test process. Measurement data during test were rotational torque and raceway temperature, and inspected key components by disassembling the bearing after all test finished. As a results, the raceway temperature during test did not exceed the operational temperature range of lubricant and rotational torque was reduced as the bearing's rotational cycle increased. In the inspection of key components, some plastic deformation and flaking were detected at some raceway sections while other components such as ball, spacer and seal remain indefective conditions.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.1
• /
• pp.117-123
• /
• 2015

To remove heat generated during a burn-up test of nuclear fuels, the heat generation rate of nuclear fuels should be calculated accurately, and a coolant should be circulated in the test loop at an adequate flow rate. HANARO is an open pool-type reactor with an independent test loop for the burn-up test of nuclear fuels. A test rig is installed in the test loop, and a coolant is circulated through the test loop to maintain the temperature of the nuclear fuel rods within a desired temperature during an irradiation test. The components and sensors in the test rig can be broken or malfunction owing to the flow-induced vibration. In this study, a coolant flow simulation system was developed to verify and confirm the soundness of components and sensors assembled in the test rig with a high flow rate of the coolant.

• Journal of Convergence for Information Technology
• /
• v.10 no.9
• /
• pp.147-153
• /
• 2020

As demand for drone test flight is rapidly increasing, it is difficult for Goheung Aviation Center alone to meet the test flight demand. Newly developed drones or modified existing aircraft carry potential flight risks due to unpredictable flight performance or poor pilot skill when performing test flights outside the test site. Therefore, it is necessary to ensure sufficient test flight space for the safety verification of manned and unmanned aircraft. Therefore, this study analyzed the status of domestic flight test site and chapter 5 of ICAO DOC 9184-AN / 902 Part 1 (Airport Planning Manual). And to build a comprehensive flight test infrastructure, the methodology for preliminary evaluation of candidate sites for flight test sites and a method for evaluating infrastructure test sites was presented.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.2 no.1
• /
• pp.3-10
• /
• 1991

Test situations are relatively specific and are experienced by everyone. The major purposes of this overview are to review the current concepts and theories of test anxiety and based on this review to suggest future directions in test anxiety theory and research. Test anxiety can be explained in terms of drive-oriented approach. trait-state anxiety theory, cognitive theory, cognitive and emotional approach, and psychodynamic theory. Usually, high test-anxious students keep the following characteristics : 1) The test situation is seen as difficult, challenging and threatening. 2) The individual sees himself as ineffective, and inadequate in handling the task at hand. 3) The individual focuses on undesirable consequences of personal inadequacy. 4) Self-deprecatory preoccupations are strong and interfere or compete with task-relevant cognitive activity. 5) The individual expects and anticipates failure and loss of regard by others. Future directions in test anxiety research should be focused to elucidate the nature and construct of test anxiety and the etiological factors of test anxiety by conducting research on the relationship between parental or social attitude and test anxiety. The effects of test anxiety on memory, attention, and cue utilization should be performed to elucidate the relationship between test anxiety and performance.

• Physical Therapy Korea
• /
• v.28 no.1
• /
• pp.47-52
• /
• 2021

Background: Compared with normal people, stroke patients have decreased voluntary craniocervical motion, which affects their balance. Objects: This study was conducted in order to examine the effects of active craniocervical movement training using a cognitive game on stroke patient's cervical movement control ability, balance, and functional mobility. Methods: The subject of this study were 29chronic stroke patients who were randomly allocated to either an experimental, cognitive game group (n = 15), or control group (n = 14), to which only neuro-developmental treatment (NDT) was applied. The intervention was conducted 5 times per week, 30 minutes per each time, for a total of 4 weeks. Active angle reproduction test, static stability test, limits of stability test, and Time up and Go (TUG) test, respectively, were carried out in order to evaluate cervical movement control ability, static balance, dynamic balance, and functional mobility. Paired t-test was used in order to compare differences between prior to after the intervention, along with an independent-test in order to compare prior to and after-intervention differences between the two groups. Results: After the craniocervical training with a body-driven cognitive game, the experimental group showed significant differences in flexion, extension, and lateral flexion on the affected side, and rotation on the affected side in the active angle reproduction test. The experimental group indicated significant differences in sway length both with eyes-open and with eyesclosed in the static stability test and in limits of stability test and TUG test. The control group to which NDT was applied had significant differences in flexion in the active angle reproduction test and in limits of stability test and TUG test. Conclusion: The above results mean that craniocervical training using a body-driven cognitive game positively influences stroke patient's cervical movement control ability and as a result their balance and functional mobility.

• Journal of Advanced Navigation Technology
• /
• v.27 no.6
• /
• pp.782-787
• /
• 2023

Korea augmentation satellite system (KASS) integration, verification, qualification (IVQ) activity is verification of requirements for KASS system and its sub-system that were performed based on the inspection, analysis, review of design, test (IART) method from factory acceptance test (FAT) to test readiness review (TRR) after critical design review (CDR) was closed. In the FAT phase, developed equipment was installed on the test platform and we were verified interfaces between sub-systems and coupling test with the kass control station (KCS). In the site aceeptance test (SAT) phase, on-site verification was conducted by installing equipment verified by FAT such as kass reference station (KRS), kass processing station (KPS), kass uplink station (KUS), KCS. However, considering the developed plan and status, SAT was divided into 3 phases and coupling test was performed. In the TRR phase, the KASS system verification was performed through FAT's test list and additional test list using the satellite based augmentation system (SBAS) broadcast signal from geostationary earth orbit (GEO) 1.