• Journal of Multimedia Information System
• /
• v.9 no.2
• /
• pp.145-154
• /
• 2022

The authors are making a prototype flexible board of a radio-frequency transmitter for measuring an electromyogram (EMG) of a flying moth and plan to apply for an experimental station license from the Ministry of Internal Affairs and Communications of Japan in the summer of 2022. The goal is to create a continuous low-dose exposure standard that incorporates scientific and physiological functional assessments to replace the current standard based on lethal dose 50. This paper describes the technical evaluation of the hardware. The signal of a bipolar EMG electrode is amplified by an operational amplifier. This potential is added to a voltage-controlled crystal oscillator (27 MHz, bandwidth: 4 kHz), frequency-converted, and transmitted from an antenna about 10 cm long (diameter: 0.03 mm). The power source is a 1.55-V wristwatch battery that has a total weight of about 0.3 g (one dry battery and analog circuit) and an expected operating time of 20 minutes. The output power is -7 dBm and the effective isotropic radiated power is -40 dBm. The signal is received by a dual-whip antenna (2.15 dBi) at a distance of about 100 m from the moth. The link margin of the communication circuit is above 30 dB within 100 m. The concepts of this hardware and the measurement data are presented in this paper. This will be the first biological data transmission from a moth with an official license. In future, this telemetry system will improve the detection of physiological abnormalities of moths.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.10
• /
• pp.729-737
• /
• 2022

Melting and icing process of the PCMTCU(Phase Change Material Thermal Control Unit) installed on the NEXTSat-2, which is scheduled to be launched in the second half, was investigated through the results of satellite-level TVT(Thermal Vacuum Test). As a result of the test, it was confirmed that the latent heat of PCM contributes to the temperature stabilization of the heating components. The thermal model for numerical analysis of the PCMTCU was correlated to acquire a reasonable degree of accuracy using the collected temperature measurements during TVT. The periodic temperature variation of the PCMTCU in normal on-orbit operation was predicted with the correlated thermal model, and the quantitative contribution of the PCM on the thermal energy management was evaluated with the liquid fraction. It will receive flight telemetry from the NEXTSat-2 after the launch, and complete the space verification of the PCMTCU.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.28 no.1
• /
• pp.51-61
• /
• 2023

Sound can travel a long distance in the ocean; hence, acoustic instruments have been widely used for ocean observations in various fields such as bathymetric survey, object detection, underwater communication, and current measurements. Herein we introduce a pressure-recording inverted echo sounder (PIES) which is one of the most powerful instruments, moored at seafloor for ocean observation in physical oceanography. The PIES can measure various kinds of oceanic phenomena (currents, mesoscale eddies, internal waves, and sea surface height variabilities) and support acoustic telemetry and pop-up data shuttle (PDS) system for remote data acquisition. In this paper, we review uses of PIES and describe present and prospective system of PIES including remote data acquisition toward (quasi) real-time data recovery.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.82-84
• /
• 2022

In recent years, research has been actively conducted to solve overhead problems caused by the increase in the number of IoT devices. MQTT, one of the IoT lightweight protocols for resolving performance degradation in IoT environments, is standardized to enable efficient operation in many-to-many communication environments, but there is a security vulnerability as it does not provide encryption by default. Although TLS communication technology can be applied to solve these problems, it is difficult to meet IoT's lightweight power-saving requirements. This paper introduces the latest MQTT communication encryption trends and analyzes IoT applicability by comparing TLS encryption and payload encryption methods.

• Journal of Advanced Navigation Technology
• /
• v.27 no.2
• /
• pp.203-208
• /
• 2023

In this study, we propose a method to improve the precision of contact resistance measurement circuits using constant current method and voltage drop method, and implement a dashboard that monitors the measured data of contact resistance measurement systems through MQTT broker server. The contact resistance measurement system measures the resistance value and transmits the measured value to the MQTT broker server using wireless communications. This developed dashboard uses Node-RED and Node-RED-Dashboard to receive the resistance values of up to four contact resistance measurement systems and show them to user's monitor screen. Users can manage multiple measurement data using a single dashboard and easily interface with other devices through the MQTT broker server. Through the experimental results from real data measurements, the relative standard deviation about precision is improved to average 40.37% and maximum 64.73% respectively.

• Journal of Astronomy and Space Sciences
• /
• v.40 no.2
• /
• pp.79-88
• /
• 2023

On Aug. 4, 2022, at 23:08:48 (UTC), the Korea Pathfinder Lunar Orbiter (KPLO), also known as Danuri, was launched using a SpaceX Falcon 9 launch vehicle. Currently, KPLO is successfully conducting its science mission around the Moon. The National Aeronautics and Space Administration (NASA)'s Deep Space Network (DSN) was utilized for the successful flight operation of KPLO. A great deal of joint effort was made between the Korea Aerospace Research Institute (KARI) and NASA DSN team since the beginning of KPLO ground system design for the success of the mission. The efficient utilization and management of NASA DSN in deep space exploration are critical not only for the spacecraft's telemetry and command but also for tracking the flight dynamics (FD) operation. In this work, the top-level DSN interface architecture, detailed workflows, DSN support levels, and practical lessons learned from the joint team's efforts are presented for KPLO's successful FD operation. Due to the significant joint team's efforts, KPLO is currently performing its mission smoothly in the lunar mission orbit. Through KPLO cooperative operation experience with DSN, a more reliable and efficient partnership is expected not only for Korea's own deep space exploration mission but also for the KARI-NASA DSN joint support on other deep space missions in the future.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.2
• /
• pp.57.4-57.4
• /
• 2019

BITSE is a project of balloon-borne experiments for a next-generation solar coronagraph developed by a collaboration with KASI and NASA. The coronagraph is built to observe the linearly polarized brightness of solar corona with a polarization camera, a filter wheel, and an aperture door. For the observation, the coronagraph is supported by the power distribution unit (PDU), a pointing system WASP (Wallops Arc-Second Pointer), telemetry & telecommand system SIP (Support Instrument Package) which are developed at NASA's Goddard Space Flight Center, Wallops Flight Facility, and Columbia Scientific Balloon Facility. The BITSE Command and Data Handling (C&DH) system used a cost-off-the-shelf electronics to process all data sent and received by the coronagraph, including the support system operation by RS232/422, USB3, Ethernet, and digital and analog signals. The flight software is developed using the core Flight System (cFS) which is a reusable software framework and set of reusable software applications which take advantage of a rich heritage of successful space mission of NASA. The flight software can process encoding and decoding data, control the subsystems, and provide observation autonomy. We developed a python-based testing framework to improve software reliability. The flight software development is one of the crucial contributions of KASI and an important milestone for the next project which is developing a solar coronagraph to be installed at International Space Station.

• Smart Media Journal
• /
• v.13 no.4
• /
• pp.76-85
• /
• 2024

In this paper, we propose a system that improves the data integrity of IoT(Internet of Things) devices in the virtual environment by combining Hyperledger Indy and MQTT(Message Queuing Telemetry Transport). The system complements the limitations of the centralized system by realizing a DPKI(Decentralized Public Key Infrastructure) structure that utilizes a distributed network in publish-subscribe(pub/sub) pattern communication. Digital signature technology was applied to ensure the data integrity of IoT devices and communication scenarios between the four core components of the client, IoT device, broker, and blockchain, as well as a topic structure using a decentralized identifier to ensure safety in the virtual environment. We present a systematic method for transparent data exchange. To prove the performance of the proposed system, this paper conducted experiments on four scenarios and evaluated communication performance in a virtual environment. The experimental results confirmed that the proposed system provides a reliable IoT data communication structure in a virtual environment.

• Korean Journal of Ichthyology
• /
• v.19 no.4
• /
• pp.371-377
• /
• 2007

The passive integrated transponder (PIT) telemetry is a useful method for investigating fish population dynamics, community structure and migration. It can be applied for small fishes (TL<100 mm) because of its tiny size and light weight. The survival rate of PIT tag was investigated on 4 small size cyprindae fish species, Carassius gibelio langsdorfi (n=34, standard length; $91.9{\pm}0.9mm$, body weight; $21.2{\pm}0.9g$), Hypophthalmichthys molitrix (n=16, SL; $75.1{\pm}0.9mm$, BW; $6.0{\pm}0.2g$), Pseudorasbora parva (n=30, SL; $51.4{\pm}1.1mm$, BW; $2.7{\pm}0.2g$) and Phoxinus phoxinus (n=37, SL; $70.6{\pm}1.4mm$, BW; $8.2{\pm}0.5g$) under age 1 for applicability and effectiveness. We used three type tags including a small (length 11.0 mm, diameter 2.1 mm, weight 0.088 g), middle (20 mm, 3.5 mm, 0.102 g), large (30 mm, 3.5 mm, 0.298 g) size. After 30 days of tag insertion, survival rate of 117 individuals were 58.1% (large tag, 50.0%; middle tag, 57.5%; small tag, 61.4%). Survival rates varied between three types of tags because the abdominal cavity of each individual was different size. The death was due to surgical damage. If we apply tagging systems on field research of the Korean freshwater fish, the PIT tag will be effective method for analyzing fish ecology.

• Korean Journal of Environment and Ecology
• /
• v.25 no.1
• /
• pp.1-9
• /
• 2011

In order to analyze the change in home ranges depending on the reproductive stage of Pipistrellus abramus, radio-tracking was carried out for a total of 9 individuals, 3 individuals each, by dividing stages into a pregnancy stage, lactation stage, and post-lactation stage from May to August 2009. For radio-telemetry, 0.38g transmitters, R2000 receivers and 3-element Yagi antennas were used. Pipistrellus abramus were captured using a double-stacked mist net and a harp-trap. Analysis of home ranges used a SHP File and ArcGIS 3.3 for GIS, and used a Kernel Home Range Method(KHR) and a Minimum Convex Polygon(MCP) Method for analysis. Home ranges at the pregnancy stage were MCP 100% $13.46{\pm}1.84ha$, MCP 95% $12.28{\pm}2.15ha$, KHR 50% $3.00{\pm}0.71ha$, and home ranges at the lactation stage were MCP 100% $8.13{\pm}0.23ha$, MCP 95% $7.73{\pm}0.63ha$, KHR 50%$1.84{\pm}1.05ha$. Home ranges at the post-lactation stage were MCP 100% $125.58{\pm}97.77ha$, MCP 95% $123.89{\pm}97.73ha$, KHR 50% $28.61{\pm}26.78ha$. As a result, home ranges of pipistrellus abramus showed a significant difference in all of the MCP 100%, MCP 95%, KHR 50% depending on reproductive stages, being largest in the post-lactation stage and smallest in the lactation stage.