• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.6
• /
• pp.744-749
• /
• 2013

The protection switching technology is widely adopted in the fiber-optical transmission equipments based on TDM(Time Division Multiplexing), such as PDH, SDH/SONET. A variety of protection switching algorithms for Ethernet networks and the progress of standardization are summarized in the document. There are several kinds of protection switching algorithms for Ethernet networks, such as STP, RSTP, MSTP and etc. However, since Ethernet signal move through detour route, it causes much time to recover. Accordingly, it is difficult to secure a usability of Ethernet networks and QOS(Quality of Service). Also, if the protection switching protocol standardized by IEEE and ITU-T is used, it remains a inherent network switching time for protection. Therefore, a specific protection switching algorithm for Ethernet are needed for seamless and stable operation of Ethernet networks service for Distribution Automation System(DAS). A reliable protection algorithm with no switching delay time is very important to implement Self-healing service for DAS. This study of FPGA based protection switching algorithm for Ethernet networks shows that in case of faults occurrence on distribution power network, immediate fault isolation and restoration are conducted through interaction with distribution equipments using P2P(Peer to Peer) communication for protection coordination. It is concluded that FPGA based protection switching algorithm for Ethernet networks available 0ms switching time is crucial technology to secure reliability of DAS.

• Structural Engineering and Mechanics
• /
• v.29 no.2
• /
• pp.135-154
• /
• 2008

The moving vehicle loads on a bridge deck is one of the most important live loads of bridges. They should be understood, monitored and controlled before the bridge design as well as when the bridge is open for traffic. A MOM-based algorithm (MOMA) is proposed for identifying the timevarying moving vehicle loads from the responses of bridge deck in this paper. It aims at an acceptable solution to the ill-conditioning problem that often exists in the inverse problem of moving force identification. The moving vehicle loads are described as a combination of whole basis functions, such as orthogonal Legendre polynomials or Fourier series, and further estimated by solving the new system equations developed with the basis functions. A number of responses have been combined, some numerical simulations on single axle, two axle and multiple-axle loads, being either constant or timevarying, have been carried out and compared with the existing time domain method (TDM) in this paper. The illustrated results show that the MOMA has higher identification accuracy and robust noise immunity as well as producing an acceptable solution to ill-conditioning cases to some extent when it is used to identify the moving force from bridge responses.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.3
• /
• pp.534-541
• /
• 2018

The number of stations existing in the same wireless channel is increasing due to the spread of the wireless LAN devices. CSMA/CA, a conventional wireless LAN protocol, uses a random backoff method. In the random backoff scheme, collision between stations is frequent in a dense region where the number of stations existing in the same channel is several tens or more, and the performance of the performance degradation of such a protocol, the IEEE 802.11ah standard proposed a Restricted Access Window(RAW) wireless access method. RAW improves performance by limiting the number of concurrent access stations by dividing the stations into several groups. In this paper, we propose a method to improve the performance of channel connection by using new group creation, group removal and group relocation algorithm according to traffic change by improving existing RAW method.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.3
• /
• pp.512-522
• /
• 1996

To provide broadband ISDN service for the users in scattered locations, the application of satellite communications network is seriously considered. To trans mit ATM cells efficiently in satellite communications, it is effective to use TDM A method. However, it is necessary to have a method to compensate the cell delayvari-ation caused by the difference between TDMA and ATM. This paper optimized the cell control time(Tc) when traffic inputs have poisson or markov modulated poisson process by applying cell delay variation characteristics of time stamp method, which has the most advantages among compensation methods or cell delay variation. This paper also intorduces a method of reducing the cell clumping phenomena by adapting discrete time stamp method, including the analysis and evalutation of the range of required quality of CDV distribution by ATM transmission.The result of the experiment shows that CDV distribution-range can be controlled to 1.2$\times$Tc which reduces overall cell delay variation by discrrete time stamp method.

• Korean Journal of Remote Sensing
• /
• v.15 no.4
• /
• pp.289-295
• /
• 1999

Space Physics Sensor (SPS) on-board the KOMPSAT-1 consists of the High Energy Particle Detector (HEPD) and the Ionospheric Measurement Sensor (IMS). The HEPD is to characterize the low altitude high energy particle environment and the effects on the microelectronics due to these high energy particles. It is composed of four sensors: Proton and Electron Spectrometer(PES), Linear Energy Transfer Spectrometer (LET), Total Dose Monitor (TDM), and Single Event Monitor (SEM). 35 MeV proton beam from the medical KCCH cyclotron, at Korea Cancer Center Hospital in Seoul, is used to calibrate the PES. Primary proton beam of 35MeV scattered by polypropylene target is converted to various energy protons according to the elastic collision kinematics. In this calibration, the threshold level of the proton in the PES can be determined and the energy ranges of PES channels are also calibrated.

• IMMUNE NETWORK
• /
• v.23 no.2
• /
• pp.16.1-16.19
• /
• 2023

Bacillus Calmette-Guerin (BCG) vaccine is the only licensed vaccine for tuberculosis (TB) prevention. Previously, our group demonstrated the vaccine potential of Rv0351 and Rv3628 against Mycobacterium tuberculosis (Mtb) infection by directing Th1-biased CD4⁺ T cells co-expressing IFN-γ, TNF-α, and IL-2 in the lungs. Here, we assessed immunogenicity and vaccine potential of the combined Ags (Rv0351/Rv3628) formulated in different adjuvants as subunit booster in BCG-primed mice against hypervirulent clinical Mtb strain K (Mtb K). Compared to BCG-only or subunit-only vaccine, BCG prime and subunit boost regimen exhibited significantly enhanced Th1 response. Next, we evaluated the immunogenicity to the combined Ags when formulated with four different types of monophosphoryl lipid A (MPL)-based adjuvants: 1) dimethyldioctadecylammonium bromide (DDA), MPL, and trehalose dicorynomycolate (TDM) in liposome form (DMT), 2) MPL and Poly I:C in liposome form (MP), 3) MPL, Poly I:C, and QS21 in liposome form (MPQ), and 4) MPL and Poly I:C in squalene emulsion form (MPS). MPQ and MPS displayed greater adjuvancity in Th1 induction than DMT or MP did. Especially, BCG prime and subunit-MPS boost regimen significantly reduced the bacterial loads and pulmonary inflammation against Mtb K infection when compared to BCG-only vaccine at a chronic stage of TB disease. Collectively, our findings highlighted the importance of adjuvant components and formulation to induce the enhanced protection with an optimal Th1 response.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.1D
• /
• pp.25-32
• /
• 2009

Currently, various types of TDM (Transportation Demand Management) policies are being studied and implemented in an attempt to overcome the limitations of supply oriented policies. In this context, this paper addressed issues of effectiveness and possible domestic implementation of the HOT lane. The possible site of implementation selected for this simulation study is part of the Kyung-bu freeway, where a dedicated bus lane is currently being operated. Minimum length of distance required in between interchanges and access points of the HOT lane for vehicles to safely enter and exit the lane, and traffic management policies for effectively managing the weaving traffic trying to enter and exit the HOT lane were presented. A 5.2km section of freeway from Ki-heuing IC to Suwon IC and a 8.3km section from Hak-uei JC to Pan-gyo JC have been selected as possible sites of implementation for the HOT lane, in which congestion occurs regularly due to the high level of travel demand. VISSIM simulation program has been used to analyze the effects of the HOT lane under the assumption that one-lane HOT lane has been put into operation in these sections and that the lane change rate were in between 5% to 30%. The results of each possible scenario have proven that overall travel speed on the general lanes have increased as well by 1.57~2.62km/h after the implementation of the HOT lane. It is meaningful that this study could serve as a basic reference data for possible follow-up studies on the HOT lane as one effective method of TDM policies. Considering that the bus travel rate would continue increase and assuming the improvement in travel speed on general lanes, similar case study can be implemented where gaps between buses on bus lane are available, as a possible alternative of efficient bus lane management policies.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.22 no.4
• /
• pp.241-246
• /
• 2002

Rye-hairy vetch mixture would be recommended fur produce higher yield and conserving soil environment. This experiment was conducted to investigate the effect of planting and harvest dates on quality and productivity of rye-hairy vetch mixture. Plant height of rye and hairy vetch was increased with delayed harvest dates, but it found that there was on significant difference among seeding dates. The dry matter(DM) content was increased with delayed harvest dates, and it showed 30% DM in mid-May. Crude protein(CP) content was decreased sharply from 17~18% in heading stage to 9~10% in flowering stage. The content of ADF(Acid detergent fiber) and NDF(Neutral detergent fiber) were increased with delayed harvest date, but IVDMD(In vitro dry matter digestibility) and TDN(Total digestible nutrient) were decreased. The change of dry matter yield was affected significantly by harvest date but was not by seeding time. The results of this experiments indicated that harvest in late-April would be recommended to produce the highest yield and quality if it is considered to cultivate com fur silage. Harvest in mid-May would be recommendable with the cultivation of early maturity silage corn or sorghum $\times$ sudangrass hybrids.

• Journal of Microbiology and Biotechnology
• /
• v.30 no.6
• /
• pp.811-821
• /
• 2020

Mycobacterium tuberculosis produces mycolic acids which are relevant for persistence, recalcitrance to antibiotics and defiance to host immunity. c-di-GMP is a second messenger involved in transition from planktonic cells to biofilms, whose levels are controlled by diguanylate cyclases (DGC) and phosphodiesterases (PDE). The transcriptional regulator dosR, is involved in response to low oxygen, a condition likely happening to a subset of cells within biofilms. Here, we found that in M. bovis BCG, expression of both BCG1416c and BCG1419c genes, which code for a DGC and a PDE, respectively, decreased in both stationary phase and during biofilm production. The kasA, kasB, and fas genes, which are involved in mycolic acid biosynthesis, were induced in biofilm cultures, as was dosR, therefore suggesting an inverse correlation in their expression compared with that of genes involved in c-di-GMP metabolism. The relative abundance within trehalose dimycolate (TDM) of α-mycolates decreased during biofilm maturation, with methoxy mycolates increasing over time, and keto species remaining practically stable. Moreover, addition of synthetic c-di-GMP to mid-log phase BCG cultures reduced methoxy mycolates, increased keto species and practically did not affect α-mycolates, showing a differential effect of c-di-GMP on keto- and methoxy-mycolic acid metabolism.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.42 no.5
• /
• pp.9-20
• /
• 2005

In this paper, we propose ubiTrack, a system which tracks users' location in indoor environments by employing infrared-based proximity method. Most of recently developed systems have focussed on performance and accuracy. For this reason, they adopted the idea of centralized management, which gathers all information in a main system to monitor users' location. However, these systems raise privacy concerns in ubiquitous computing environments where tons of sensors are seamlessly embedded into environments. In addition, centralized systems also need high computational power to support multiple users. The proposed ubiTrack is designed as a passive mobile architecture to relax privacy problems. Moreover, ubiTrack utilizes appropriate area as a unit to efficiently track users. To achieve this, ubiTrack overlaps each sensing area by utilizing the TDM (Time-Division Multiplexing) method. Additionally, ubiTrack exploits various filtering methods at each receiver and utilization module. The filtering methods minimize unexpected noise effect caused by external shock or intensity weakness of ID signal at the boundary of sensing area. ubiTrack can be applied not only to location-based applications but also to context-aware applications because of its associated module. This module is a part of middleware to support communication between heterogeneous applications or sensors in ubiquitous computing environments.