• Title/Summary/Keyword: TDI

Search Result 220, Processing Time 0.025 seconds

Assessment of climate change impact on aquatic ecology health indices in Han river basin using SWAT and random forest (SWAT 및 random forest를 이용한 기후변화에 따른 한강유역의 수생태계 건강성 지수 영향 평가)

  • Woo, So Young;Jung, Chung Gil;Kim, Jin Uk;Kim, Seong Joon
    • Journal of Korea Water Resources Association
    • /
    • v.51 no.10
    • /
    • pp.863-874
    • /
    • 2018
  • The purpose of this study is to evaluate the future climate change impact on stream aquatic ecology health of Han River watershed ($34,148km^2$) using SWAT (Soil and Water Assessment Tool) and random forest. The 8 years (2008~2015) spring (April to June) Aquatic ecology Health Indices (AHI) such as Trophic Diatom Index (TDI), Benthic Macroinvertebrate Index (BMI) and Fish Assessment Index (FAI) scored (0~100) and graded (A~E) by NIER (National Institute of Environmental Research) were used. The 8 years NIER indices with the water quality (T-N, $NH_4$, $NO_3$, T-P, $PO_4$) showed that the deviation of AHI score is large when the concentration of water quality is low, and AHI score had negative correlation when the concentration is high. By using random forest, one of the Machine Learning techniques for classification analysis, the classification results for the 3 indices grade showed that all of precision, recall, and f1-score were above 0.81. The future SWAT hydrology and water quality results under HadGEM3-RA RCP 4.5 and 8.5 scenarios of Korea Meteorological Administration (KMA) showed that the future nitrogen-related water quality in watershed average increased up to 43.2% by the baseflow increase effect and the phosphorus-related water quality decreased up to 18.9% by the surface runoff decrease effect. The future FAI and BMI showed a little better Index grade while the future TDI showed a little worse index grade. We can infer that the future TDI is more sensitive to nitrogen-related water quality and the future FAI and BMI are responded to phosphorus-related water quality.

Serum interleukin-6, tumor necrosis factor-α and adiponectin levels in Kawasaki disease (가와사키병 환자의 혈청 interleukin-6, tumor necrosis factor-α, Adiponectin 치에 대한 연구)

  • An, Jung;Kim, Han Gyu;Sohn, Sejung;Hong, Young Mi
    • Clinical and Experimental Pediatrics
    • /
    • v.53 no.1
    • /
    • pp.41-47
    • /
    • 2010
  • Purpose : Adiponectin is an endogenous modulator of vascular remodeling that suppresses vascular inflammation. However, the role of adiponectin in Kawasaki disease (KD) has not been elucidated. The purpose of this study is to investigate the correlation between serum adiponectin level and several parameters, such as interleukin (IL)-6, tumor necrosis factor $(TNF)-{\alpha}$, lipid profile, and C reactive protein (CRP), and to clarify the association between adiponectin and cardiac function. Methods : Twenty-two KD patients (22 patients in acute phase and 20 patients in subacute phase) were enrolled in the study group. The control group consisted of 31 subjects (13 febrile patients and 18 healthy children). Both groups underwent blood sampling and tissue Doppler imaging (TDI). Results : CRP was significantly increased in the KD group compared with the control group. There were no significant differences in serum $TNF-{\alpha}$, IL-6, and adiponectin levels between groups. However, a negative correlation was found between adiponectin level and CRP level or platelet count. Systolic myocardial velocity and A myocardial velocity measured by TDI were decreased significantly in the acute KD group compared with the subacute KD group and control group. Positive correlations were found between adiponectin level and systolic myocardial velocity or A myocardial velocity. Conclusion : In acute KD patients, low adiponectin level was related to severe inflammatory reactions and decreased left ventricular functions.

Risk Assessment of Polychrorinated Biphenyls (PCBs) through Food Intake for the Korean Population (식품 중 폴리염화비페닐 위해평가)

  • Paek, Ockjin;Suh, Junghyuk;Park, Heera;Oh, Keumsoon;Hong, Selyung;Lee, Hyunkyung;Kim, Meehye
    • Korean Journal of Food Science and Technology
    • /
    • v.45 no.3
    • /
    • pp.364-369
    • /
    • 2013
  • Polychlorinated biphenyls (PCBs) have been studied during the past few decades because of their potential impacts on the environment and human health. PCBs are toxic environmental pollutants and persistent organic pollutants (POPs). This study was carried out to assess the dietary exposure and risk to PCBs for the general Korean population through food intake. Various samples (n=389) covering 28 kinds of food were collected from 5 cities in Korea. The PCB content was not detected-$182.4{\mu}g/kg$ (mean of $5.4{\mu}g/kg$) in the food. The mean dietary exposure of PCBs for the general population was 9.54 ng/kg bw/day with an intake of 0.19% of tolerable daily intake (TDI) ($5{\mu}g/kg$ bw/day). Therefore, the level of overall dietary exposure to PCBs for the Korean population through food intake is below the recommended TDI levels.

A Study on Properties of the Urethane Prepolymer Synthesis with Polyether-diol and Aromatic Diisocyanate System (폴리에테르-디올과 방향족 디이소시아네이트계의 우레탄 프리폴리머 합성에 따른 특성연구)

  • Lee, Hyun-Joo;Kim, Kwang
    • Applied Chemistry for Engineering
    • /
    • v.9 no.4
    • /
    • pp.491-496
    • /
    • 1998
  • The composition of isocyanates and polyols influence prepolymeric properties of adhesive and calking sealant based on polyurethanes (PU). One component moisture curing prepolymers, which reacted with surface humidity of substrate, were synthesized in several kinds of composition. Reactivity, structural change and properties of the prepolymers were studied as a preliminary step to manufacture PU based adhesive and sealant. To study the effects of mole ratio ([NCO]/[OH]), we used toluene diisocyanate (TDI), 4, 4'-diphenylmethane diisocyanate (MDI), and ether-polyols such as PTMG and PPG which have good resistance to hydrolysis and excellent low-temperature properties. The each prepolymers could be prepared in different molecular weight without any significant structural change. The mole ratio 1.78 of [NCO] to [OH] showed the fastest reactivity. It was confirmed that effect of polyols was larger than that of isocyanates on the prepolymer in reactivity. Several kinds of compounds were manufactured with each prepolymer, and tensile and properties were tested. And the optimum quantity of curing accelerator for the PU was 0.05~0.1%. In the tensile test, TDI based PU was superior to MDI based PU, and also PTMG based PU was superior PPG based PU.

  • PDF

Effects of an Inflowing Urban Stream (Wonju stream) on Epilithic Diatom Assemblages in the Lower Seom River (도시 하천(원주천) 유입이 섬강 하류 부착규조 군집에 미치는 영향)

  • Yoon, Sung-Ae;Kim, Nan-Young;Kim, Baik-Ho;Hwang, Soon-Jin
    • Korean Journal of Ecology and Environment
    • /
    • v.43 no.2
    • /
    • pp.232-241
    • /
    • 2010
  • Epilithic diatom communities and water quality were monitored to evaluate the ecological impact of the inflow of Wonju-stream passing through the urban area in the Seom River Watershed. We selected the 14 sampling stations (5 main stream sites and 9 tributary sites), and collected diatom and water samples between October 2007 and September 2008, on the seasonal basis. The results indicate that most water quality parameters showed the site-specific patterns over the study, except for water temperature and dissolved oxygen. The levels of water quality parameters were highest at the site of Wonju stream, whereas the lowest in the upstream sites, and intermediate or gradually decreased in the downstream sites of the Seom river. One species, Achnanthes convergens, showed the highest biomass and frequency over the sites, while three saprophilous species-Navicula goeppertiana, Navicula subminuscula, Nitzschia palea were appeared only in Wonju Stream and other polluted sites. According to trophic diatom index (TDI) values, which were highly correlated with nutrients and EC, the study sites were classified into three classes: upstream and tributary (Class A and B), Wonju Stream (Class D), and mixed zone and downstream (Class C). A cluster analysis supported the result of TDI classification. Therefore, Wonju-stream located in populated urban area exerted the adverse ecological effects on the epilithic diatom community and water quality of the lower Seom River System, although its severity gradually decreased downstream.

Analysis of the Epilithic Diatom Community and Comparison of Water Quality in the Kumho River (금호강의 부착규조 군집분석과 수질 변화비교)

  • Choi, Jaesin;Chae, Hyunsik;Kim, Han-soon
    • Korean Journal of Ecology and Environment
    • /
    • v.48 no.2
    • /
    • pp.115-121
    • /
    • 2015
  • In order to assess the water quality of Kumho river using Diatom Assemblage Index to organic water pollution (DAIpo) and to campare from the previous water quality, 5 sites in Kumho river were selected and assessed total of 6 times, every April and September from April 2010 to September 2012. As a result, 116 taxa were found in 2 Order, 3 Suborder, 7 Families, 26 Genera, 103 species and 13 varieties. Saprophilous species of 10 dominant species including Achnanthes minutissima, were increased as going to downstream sites. Correlation coefficients (r) between epilithic diatom communities and physicochemical factors were from - 0.62 to 0.71. Correlation coefficients (r) between TN and diatom indices (DAIpo, TDI) were 0.57 and 0.65, respectively. Therefore, epilithic diatom communities were greatly influenced by TN. The Correlation between DAIpo and TDI measured to be high in correlation coefficient (r=0.62) from the result of correlation analysis. Mean of DAIpo values ranged between 37.24~74.98 and decreased as going to downstream sites. Saprobic level was estimated as ${\beta}$-oligosaprobic at st. 1, ${\alpha}$-oligosaprobic at st. 2 and ${\beta}$-mesosaprobic at st. 3. But st. 4 and 5 which were ${\alpha}$-mesosaprobic and polysaprobic in the previous results, were improved as ${\beta}$-mesosaprobic. The RPId, general assessment of the water quality using DAIpo, was 52.27, which means the water quality of Kumho river was middle level.

Improvement of Bonding Process and Bond Strength of HTPB Propellant/Liner using a Polymeric Curative (고분자 경화제를 사용한 라이너와 HTPB 추진제의 접착력 및 접착공정 개선)

  • Jeong Byung-Hun;Seo Tae-Seok;Hong Myung-Pyo
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2005.11a
    • /
    • pp.413-416
    • /
    • 2005
  • The study has been performed on the improvement of bonding process and bond strength of HTPB propellant and liner using a polymeric curative. In case of liner using polymeric curative prepared from reaction of HTPB and TDI, migration of curative was decreased at bond interface. So EPDM insulation sanding and Desmodur RE coating process could be omitted in motor case preparation and bond strengths between the HTPB propellant and liner were increased. Also deterioration phenomena of bond strength could not be observed in accelerated aging test.

  • PDF

Synthesis and Emulsification of Polyurethane Anionomer (음이온성 폴리우레탄의 합성 및 에멀젼화에 관한 연구)

  • Ann, Choun-Kee;Jin, Je-Yong;Lee, Gyung-Won;Choi, Sei-Young
    • Elastomers and Composites
    • /
    • v.34 no.5
    • /
    • pp.399-406
    • /
    • 1999
  • Polyurethane (PU) prepolymers were synthesized from polytetramethylene ether glycol (PTMG), 4,4'-diphenylmethane diisocyanate (MDI), toluene 2,4-diisocyanate (TDI) and isophoron diisocyanate (IPDI). After chain extention using dimethyol propionic acid (DMPA), aqueous polyurethane anionomers were prepared from triethyl amine (TEA) as a neutralizer. The effect of the content of chain extender and the degree of neutralization on the state of emulsification, adhesive strength, viscosity, glass transition temperature and physical properties of emulsion cast film were investigated using UTM, Viscometer and DSC.

  • PDF

Study on the Synthesis of Polyurethane Cationomers and Their Mechanical Properties (양이온성 폴리우레탄의 합성 및 기계적 특성에 관한 연구)

  • Ann, Choun-Kee;Jin, Je-Yong;Choi, Sei-Yong
    • Elastomers and Composites
    • /
    • v.33 no.3
    • /
    • pp.177-184
    • /
    • 1998
  • Polyurethane(PU) prepolymers were synthesized from polytetramethylene ether glycol(PTMG), with 4,4'-diphenylmethane diisocyanate(MDI), toluene 2,4-diisocyanate (TDI) and isophoron diisocyanate(IPDI). After chain extention using n-methyl-diethanol amine(n-MDEA), aqueous polyurethane cationomers were prepared by addition of glycolic acid(GA) as a quaternizer. The effect of the content of chain extender and the degree of neutralization on the stability of emulsion, adhesive strength, viscosity, glass transition temperature and physical properties of emulsion cast film were investigated using UTM, viscometer and DSC.

  • PDF

Assessment of total is ocyanates by OSHA and NIOSH analytical methods : accuracy and precision and airborne concentrations by process (NIOSH와 OSHA 측정 방법을 이용한 이소시아네이트류 발생 공정별 농도 분포 평가)

  • Kang, Hyoung Kyoung;Kim, Hyunwook
    • Journal of Korean Society of Occupational and Environmental Hygiene
    • /
    • v.9 no.2
    • /
    • pp.1-18
    • /
    • 1999
  • The purpose of this study was to compare performances of two analytical methods, the OSHA 42 and the NIOSH 5522, of quantifying total isocyanates in air. These methods were compared in terms of accuracy and precision and the detection limits using four(4) spiked samples in each of four(4) concentration levels which ranged from 0.25 to 2.0 times of the ACGIH TLV-TWA. In addition, two methods were used to as sess airborne concentrations of total isocyanates at the following processes including autobody spray painting, furniture spray painting, polyurethane foaming, urethane adhesion, UV coating, and pigment mixing. The results of this study showed that the NIOSH 5522 method was better than the OSHA 42 method in terms of accuracy, precis ion, and detection limit for quantifying airborne total isocyanates. It was also clear that the NIOSH method was capable of detecting not only monomeric but also non-monomeric isocyanates. The results of air concentrations of total isocyanates among processes studied indicate that some processes may exceed the recommended level of isocyanates. In addition, to evaluate toxicological effects of total isocyanates, it is recommended to consider additive effects of isocyanates present in mixtures.

  • PDF