• Computers and Concrete
• /
• v.11 no.2
• /
• pp.93-104
• /
• 2013

The use of rock wool waste, an industrial by-product, in cement-based composites has positive effects on the environment because it reduces the problems associated rock wool disposal. The experiments in this study tested cement-based composites using various rock wool waste contents (10, 20, 30 and 40% by weight of cement) as a partial replacement for Portland cement in mortars. The pozzolanic strength activity test, flow test, compressive strength test, dry shrinkage test, absorption test, initial surface absorption test and scanning electron microscope observations were conducted to evaluate the properties of cement-based composites. Test results demonstrate that the pozzolanic strength activity index for rock wool waste specimens is 103% after 91 days. The inclusion of rock wool waste in cement-based composites decreases its dry shrinkage and initial surface absorption, and increases its compressive strength. These improved properties are the result of the dense structure achieved by the filling effect and pozzolanic reactions of the rock wool waste. The addition of 30% and 10% rock wool wastes to cement is the optimal amount based on the results of compressive strength and initial surface absorption for a w/cm of 0.35 and 0.55, respectively. Therefore, it is feasible to utilize rock wool waste as a partial replacement of cement in cement-based composites.

• Journal of Environmental Science International
• /
• v.22 no.11
• /
• pp.1415-1419
• /
• 2013

This study was conducted to investigate the seasonal variation characteristics of phytoncide in trail of Ulsan Metropolitan. Air samples were collected from May to December 2011. They were collected using Tenax Ta tube and phytoncides were detected and quantified using a Gas Chromatograph Mass Spectrometer (GC/MSD). This study are summarized as follows; The seasonal concentrations of phytoncide are Munsu Mt. 272.3 ${\mu}g/m^3$, Samho Mt. 192.4 ${\mu}g/m^3$, Shinbul Mt. 50.9 ${\mu}g/m^3$, Sibli Bamboo forest 22.4 ${\mu}g/m^3$ and Joongbu Fire Station 24.4 ${\mu}g/m^3$. In Munsu Mt., Samho Mt. and Shinbul Mt. major component ratio is ${\alpha}$-Pinene > ${\beta}$-Pinene+Myrcene >Limonene >Camphene > ${\gamma}$-Terpinene > ${\alpha}$-Terpinene. Bamboo forest and Joongbu fire station major component ratio is ${\alpha}$-Pinene >Limonene > ${\beta}$-Pinene+Myrcene >Camphene > ${\alpha}$-Terpinene. The variation of seasonal concentration is summer >spring >fall >winter. The phytoncide concentration of coniferous forest(Munsu Mt., Samho Mt.) is higher than broadleaf forest(Shinbul Mt.).

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.11
• /
• pp.696-701
• /
• 2014

In this study, in order to develop coupled vibration mode piezoelectric devices for Acoustic Emission (abbreviated as AE) sensor application with outstanding displacement and piezoelectric properties have been simulated by ATILA FEM program. And, From the results of ATILA simulation, the AE sensor specimen, obtained superior electromechanical coupling factor and displacement, when the size of specimen is $3.45mm{\Phi}{\times}3.45mm$ with ratio of diameter/thickness(${\Phi}/T$)= 1.0. Therefore, AE sensor was fabricated by (Na,K,Li)(Nb,Ta) $O_3$(abbreviated as NKL-NT) system piezoelectric ceramics using coupled vibration mode. The piezoelectric properties of NKL-NT ceramics was exhibited that piezoelectric constant($d_{33}$), piezoelectric voltage constant($g_{33}$) and electro mechanical coupling factor($k_p$) have the excellent values of 261[pC/N], 40.10[$10^{-3}Vm/N$], and 0.44, respectively. The manufactured piezoelectric device with ratio of ${\Phi}/T$= 1.0 indicated the optimum values of resonant frequency(fr)= 556.5[kHz], antiresonant frequency(fa)=631.1[kHz], and effective electromechanical coupling factor(keff)= 0.473. The maximum sensitivity of the coupled vibration mode AE sensor was 55[dB] at the resonant frequency of 75[kHz]. The results show that the coupled vibration mode piezoelectric device is a promising candidate for the application AE sensor piezoelectric device.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.11
• /
• pp.870-875
• /
• 2011

The $(Na_{0.52}K_{0.44})(Nb_{0.9}Sb_{0.06})O_3-0.04dLiTaO_3$ (NKNS-LT) ceramics with various $Cu_2O$ concentration were prepared by the conventional solid state reaction method. The $Cu_2O$ content was varied in the range of 0.1~0.4 wt%. The effects of Cu on microstructure, crystallographic phase transition, and piezoelectric properties were investigated. The material with perovskite structure had a tetragonal phase (T1) when $Cu_2O$ concentration was less than 0.3 wt% and it transformed to another tetragonal phase (T2) when the $Cu_2O$ amount was greater than 0.3 wt%. The phase boundary between T1 and T2 phases appeared at around 0.3 wt% of $Cu_2O$ concentration. The piezoelectric properties were shown the maximum values at the composition of the phase boundary. The electro-mechanical coupling factor ($k_p$) was 0.42 and the piezoelectric charge constant ($d_{33}$) was 245 pC/N at the 0.3 wt% of $Cu_2O$ concentration.

• Journal of electromagnetic engineering and science
• /
• v.13 no.3
• /
• pp.178-185
• /
• 2013

This paper introduces a high-efficiency, high-gain, broadband quasi-Yagi antenna, and its four-element array for use in 60-GHz wireless communications. The antenna was fed by a microstrip-to-slotline transition consisting of a curved microstripline and a circular slot to allow broadband characteristics. A corrugated ground plane was employed as a reflector to improve the gains in the low-frequency region of the operation bandwidth, and consequently, to reduce variation. The single antenna yielded an impedance bandwidth of 49 to 69 GHz for $|S_{11}|$ <-10dB and a gain of >12.0 dBi while the array exhibited a bandwidth of 52 to 68 GHz and a gain greater than 15.0 dBi. Both proposed designs had small gain variations (${\pm}0.5$ dBi) and high radiation efficiency (>95%) in the 60-GHz bands. The features of the proposed antenna were validated by designing, fabricating, and testing a scaled-up configuration of the single antenna at the 15-GHz band. The measurements resulted in an impedance bandwidth of 13.0 to 17.5 GHz for $|S_{11}|$ <-10dB, a gain of 10.1 to 13.2 dBi, and radiation efficiency in excess of 88% within this bandwidth. Additionally, the 15-GHz antenna yielded quite symmetric radiation profiles in both E- and H-planes, with a high front-to-back ratio.

• The KIPS Transactions:PartC
• /
• v.11C no.5
• /
• pp.645-652
• /
• 2004

In this paper, we aggregate multi-links information between boundary nodes using the line segment scheme that aggregates topology in-formation within PG referring bandwidth and delay parameter. The proposed scheme can search multi-links efficiently using the depth priority method based on hop count instead of searching all links. To do this, we propose a modified line segment algorithm using two line segment method that represents two points which consist of delay-bandwidth pair to reduce topology information and provide a flexibility to the multi pie-links aggregation. And we apply it to current star topology aggregation. To evaluate performance of the proposed scheme, we compare/analyze the current method with the proposed scheme with respect to call success rate, access time and crankback rate. Through the simulation result analysis, the proposed star topology aggregation scheme presents the better performance than existing scheme.

• Progress in Superconductivity and Cryogenics
• /
• v.26 no.3
• /
• pp.27-31
• /
• 2024

We fabricate high-entropy alloy (HEA) Ta_1/6Nb_2/6Hf_1/6Zr_1/6Ti_1/6 superconducting (SC) thin films via a pulsed laser deposition method. Two targets are prepared using arc melting, each followed by sintering at different temperatures: 550℃ and 700℃ for 12 hours. The films, HEA550 and HEA700, are deposited on c-cut Al₂O₃ substrates at a substrate temperature of 520℃, using the targets sintered at 550℃ and 700℃, respectively. The SC transition temperature (T_c) of HEA700 is 6.88 K, slightly higher than that of HEA550 (= 6.27 K). Both films exhibit similar upper critical field (H_c2) at 0 K, with 11.34 T for HEA550 and 11.40 T for HEA700. Notably, HEA700 exhibits a large critical current density (J_c) of approximately 4.4 MA/cm² and 3.5 MA/cm² at 2.0 K and 4.2 K, respectively, accompanying by a predominance of normal point pinning. These results indicate that the targets prepared by arc melting are beneficial for achieving a large J_c in HEA SC thin films, thus providing new avenues for improving SC critical properties of HEA thin films for their practical applications.

• Korean Journal of Environment and Ecology
• /
• v.23 no.6
• /
• pp.569-576
• /
• 2009

Sediment and nutrient loading caused by the removal of forest cover and alteration of agricultural lands in catchments have led to the deterioration in Lake Shirarutoro. To examine the effects of deforestation and agricultural activities on water quality, I examined changes in total nitrogen (TN) and total phosphorus (TP) of lake water induced by land use change, and compared them with the various research data produced over the years. Our investigation showed that the level of TN and TP in the lake water decreased when forest cover increased but increased when farmland area increased. The concentration of TN and TP was high in Lake Shirarutoro despite that its catchment was surrounded by large forests and small farmlands. This result indicates that land uses near Lake Shirarutoro have affected the quality of the lake water. I have examined the changes of sediment yield in the lake's catchment over the last approximately 300 years. Eleven core samples were obtained from the lake sediment and analyzed to establish a chronology after using two tephra layers (Ko-c2 in 1694 and Ta-a in 1739) and a $^{137}Cs$ peak (in 1963). The average sediment yield under the natural condition during the first two periods was 8.4 tons/$km^2$/year in 1694~1739 and 8.9 tons/$km^2$/year in 1739~1963 respectively. The conversion of the Shirarutoro catchment into agricultural lands and deforestation intensified, leading to an increased sediment yield of 21.1 tons/$km^2$/year during 1963~2007.

• Economic and Environmental Geology
• /
• v.30 no.5
• /
• pp.395-406
• /
• 1997

Some RE (Zr, Nb, REE) ore deposits are located in the middle part of the Korean peninsula. Geotectonically, the RE ore deposits situated on the Kyemyeongsan Formation of northern margin of the Okcheon geosynclinal belt and in the transitional zone between Kyeonggi massif and Okcheon belt. The rare metal deposits distributed in Kyemyeongsan Formation which consists of schist and alkaline granite. The alkali granite has suffered extensive post-magmatic metasomatism and hydrothermal processes. The ore contains mainly Ce-La, Ta-Nb, Y, Y-Nb, Ti-Nb-(U), Nd-Th group minerals. Fergusonite, one of Nb-Y rich REE minerals belonging to the A-B oxides, is most common mineral in the rare metal deposits. The fergusonite bearing rocks may be devided into four types by occurrence features and mineral association, that is, zircon type, allanite vein, feldspar type, and fluorite type. Fergusonites show wide variations in optical properties, due to part of differences in their chemical composition (depending on the types), but also the degree of crystalinity of the individual specimens. Fergusonite metamicts enclosed in biotite are generally surrounded by well developed pleochroic haloes. Usually, fergusonite is accompanied with zircon and other REE-bearing minerals. Petrographical and chemical data are presented for fergusonites which collected different types. $Nb_2O_3$ and $Y_2O_3$ contents range from 48.51 to 53.01 wt.% and 29.18 to 42.02 wt.% respectively. Also, $ThO_2$, (1.83~6.93), $UO_2$, (0.17~2.84), ${\sum}RE_2O_3$ (except to Y) (1.11~8.73), and $TiO_2$, (0.19~1.19 wt.%) contents show variational compositions according to fergusonite types. The ${\sum}RE_2O_3$ of fergusonites are positive relation with $Y_2O_3$ and negative relaton with $ThO_2$ and $({\sum}{RE_2O_3}-{Y_2O_3})$. The $Nb_2O_3$ is sightly negative relation with $Ta_2O_3$. Back-scattered electron microscope images (BEI) of fergusonite show the mineral composition and textural feature is very complicated. The variation of Nb, Th and REE content of fergusonite and the modes of occurrence of mineral, suggests that REE may have been mobilized during the circulation of hydrothermal fluids related to contact metamorphism (metasomatism). The chemical variation of the fergusonites with occurrences and mineral association can be related to metasomatism of alkaline fluid was probably the dominant ore-forming process in Chungju district.

• Journal of Korean Neurosurgical Society
• /
• v.43 no.6
• /
• pp.288-293
• /
• 2008

Objective : Bone cement leakage is a well-known potential complication of percutaneous vertebroplasty (PVP) in patients with osteoporotic compression fracture. Even though there has been a controversy in the efficacy of antecedent venography to prevent this complication, many authors have performed intra osseous venography before bone cement injection. The goal of this study was to classify the venous drainage patterns of spine before PVP, and compare their patterns at different vertebral levels. Methods : The authors retrospectively reviewed 1,042 intraosseous venographic patterns in 321 patients with 574 osteoporotic compression fractures during six-year period in one institution. To classify venogram patterns, we selected simple lateral X-ray of spine taken immediately after injection of the contrast dye. We classified the venography patterns according to contrast leakage pattern and leakage direction as follows; trabecular (TR), trabecular anterior (TA), trabecular posterior (TP), trabecular anterior-posterior (TAP), trabecular lateral (TL), venous anterior(VA), venous posterior (VP), venous anterior-posterior (VAP), soft tissue (ST). Also, we compared venogram patterns according to different spinal levels. Results : In overall, the most common pattern was TP type accounting for 37.4% (390/1042) of all intraosseous venograms. This is followed by TAP in 21.5%, TR 17.4%, TA 116%, TL 5.8%, ST 4.1%, VA 1.2%, VP 0.6%, and VAP 0.4% in descending order of frequency. According to the spinal level, TR and TAP types were most common in thoracic spine (T6-T10), TP type was most common in thoraco-Iumbar spine (T11-L2), and TP and TAP types were most common in lumbo-sacral spine (L3-S1). Contrast dye leakage to soft tissue such as psoas muscle or disc were detected in 43 (4.1%) venograms. Direct venous drainage without staining of vertebral body was found in 23 (2.2%) venograms. The 8.3% of thoracic venogram showed direct venous drainage. Thoracic level showed a more tendency of direct venous drainage than other spine levels (p<001). Conclusion : The authors propose a new classification system of intra osseous venography during PVP. The trabecular-posterior (TP) type is most common through all spine, and venous-filling (V) type was most frequent in thoracic spine. Further study would be necessary to elucidate the efficacy of this classification system to prevent bone cement leakage during PVP.