• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.6
• /
• pp.753-759
• /
• 2007

Statement of problem. In distal extension removable partial denture, the preservation of health of abutment teeth is very important, but abutment teeth are subjected to unfavorable stress under unilateral loading specially. Purpose. The purpose of this study was to investigate the biomechanical effects of mandibular removable partial dentures with various prosthetic designs under unilateral loading, using strain gauge analysis. Material and methods. Artificial teeth of both canines were anchored bilaterally in a mandibular edentulous model made of resin. Bilateral distal extension removable partial dentures with splinted and unsplinted abutments were fabricated. Group 1: Clasp-retained mandibular removable partial denture with unsplinted abutments Group 2: Clasp-retained mandibular removable partial denture with splinted abutments by 6-unit bridge. Group 3: Bar-retained mandibular removable partial denture Strain gauges were bonded on the labial plate of the mandibular resin model, approximately 2 mm dose to the abutments. Two unilateral vertical experimental loadings (30N and 100N) were applied subsequently via miniature load cell that were placed at mandibular left first molar region. Strain measurements were performed and simultaneously monitored from a computer connected to data acquisition system. For within-group evaluations, t-test was used to compare the strain values and for between-group comparisons, a one-way analysis of variance (ANOVA) was used and Tukey test was used as post hoc comparisons. Results. The strain values of group 1 and 2 were tensile under loadings. In contrast, strain values of group 3 were compressive in nature. Strain values increased as the applied load in increased from 30N to 100N (p<.05) except for right side in group 1. Under 30N loading, in left side, group 1 showed higher strain values than groups 2 and 3 in absolute quantity (p<.05). And group 2 showed higher strain values than group 1 (p<.05). In right side, group 1 and 2 showed higher strain values than group 3 in absolute quantity (p<.05). Under 100N loading in left side, group 1 showed higher strain values than groups 2 and 3 in absolute quantity (p<.05). And group 2 showed higher strain values than group 1 (p<.05). In right side, group 1 and 2 showed higher strain values than group 3 in absolute quantity (p<.05). Under 30N loading, group 2 and 3 showed higher strain values in right side than in left side. Under 100N loading, right side strain values were higher than left side ones for all groups. Conclusion. Splinting of two isolated abutments by bridge reduced the peri-abutment strain in comparison with unsplinted abutments under unilateral loading. Bar-retained removable partial denture showed the lowest strain of three groups, and compressive nature.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.3
• /
• pp.169-175
• /
• 2012

Purpose: In this study, brazing characteristics of $ZrO_2$ and Ti-6Al-4V brazed joints with increasing temperature were investigated. Materials and methods: The sample size of the $ZrO_2$ was $3mm{\times}3mm{\times}3mm$ (thickness), and Ti-6Al-4V was $10mm(diameter){\times}5mm(thickness)$. The filler metal consisted of Ag-Cu-Sn-Ti was prepared in powder form. The brazing sample was heated in a vacuum furnace under $5{\times}10^{-6}$ torr atmosphere, while the brazing temperature was changed from 700 to $800^{\circ}C$ for 30 min. Results: The experimental results shows that brazed joint of $ZrO_2$ and Ti-6Al-4V occurred at $700-800^{\circ}C$. Brazed joint consisted of Ag-rich matrix and Cu-rich phase. A Cu-Ti intermetallic compounds and a Ti-Sn-Cu-Ag alloy were produced along the Ti-6Al-4V bonded interface. Thickness of the reacted layer along the Ti-6Al-4V bonded interface was increased with brazing temperature. Defect ratios of $ZrO_2$ and Ti-6Al-4V bonded interfaces decreased with brazing temperature. Conclusion: Thickness and defect ratio of brazed joints were decreased with increasing temperature. Zirconia was not wetting with filler metal, because the reaction between $ZrO_2$ and Ti did not occur enough.

• Korean Journal of Veterinary Pathology
• /
• v.6 no.2
• /
• pp.101-104
• /
• 2002

닭의 전신장기에 림프종 발생이 특정인 마렉병(Marek's disease; MD)은 림프구성 백혈병(Lymphoid leukosis; LL)과 병리학적 소견이 매우 유사하여 감별이 요구된다. 마렉병 바이러스(Marek's disease virus; MDV)는 질병초기에서 후기에 이르기까지 모낭상피세포에 세포용해성 감염을 지속적으로 일으킨다. 세포용해성 감염이 있는 모낭상피세포는 변성내지 괴사되어 있고 핵내봉입체가 관찰된다. 또한 세포용해성 감염이 있는 모낭상피세포 바로 밑의 진피와 깃털 수질(feather pulp)내의 혈관주위에 림프구 침윤이 관찰된다. 이러한 피부병변은 MD의 특징적인 병변들로서 LL과 감별할 수 있는 결정적인 단서이다. 본 고에서는 MD에 관한 전반적인 것과 특히 MD 진단을 위한 피부병변의 유용성에 대해서 자세히 논하고자 한다. 양계산업에 문제를 야기하고 있는 림프구 증식성 종양은 크게 마렉병(Marek’s disease; MD)과 백혈병(Lymphoid leukosis; LL)이 있다. 이들 질환의 원인체들이 분리되기 전까지는 이들 질병들은 발병부위에 따라 질병명을 붙였다. 즉, 내부장기냐 근육에 발생한 것은 visceral lymphomatosis, 피부에 발생한 것은 skin leukosis, 말초신경의 병변은 poly­n neuritis, neuritis, neurolymphomatosis gallinarum, range paralyis로 불리었다. 또한 눈에 발생한 것은 blindness, gray eye, iritis, uveitis, ocular lymphomatosis라고 불리었다. 1961년에 Biggs는 이러한 림프구 증식성 질병을 마렉병과 백혈병 으로 분류하자는 제안을 하였고, 드디어 1960년대 중반에 림프구 증식성 병변 중의 일부에서 herpesvirus가 분리되어서 Biggs가 제안한 병명인 마렉병을 본격적으로 사용하게 되었다. MD는 마렉병 바이러스(Marek’s disease virus; MDV)가 원 인제로서 닭에 전염성이 강한 염증성에서 종양성의 병변을 내부장기, 피부, 근육, 안구, 중추신경계, 말초신경계 등에 일 으킨다. MDV는 림프종을 유발하기 때문에 처음에는 사람에서 림프종을 유발하는 Epstein-Bar 바이러스와 관련이 있을 것으로 생각되어 gamma-herpesvirus로 분류되었지만, MDV의 게놈 구조와 세포배양에서 빠르게 성장한다는 점 때문에 지금은 alpha-herpesvirus로 재분류 되었다. MDV는 바이러스 중화시험과 한천 겔 침강법에 의해서 3개의 혈청형으로 분류 된다. 혈청형 1은 종양원성 바이러스와 종양원성 바이러스의 계대배양에 의한 약독주가 있다. 혈청형 2는 자연적으로 발 생하는 비종양원성 닭의 MDV이고, 혈정형 3은 바종양원성 칠면조 herpesvirus (HVT)이다. 림프종을 유발하는 MDV 감염은 4개의 과정, 즉 초기 세포용해성 감염, 잠복감염, 후기 세포용해성 감염, 마지막으로 종양화로 나눌 수 있다. 감염의 경로를 보면, 흡입된 MDV는 폐의 대식세포에 감염한 후 전선 장기로 MDV를 전파 시킨다. 특히, 흉선, F냥, 비장 등의 림프구에 초기 세포용해성 감염을 일으키는데, B 림프구가 주로 감염된다. 세포용해성 감염음 방어하기 위해 몰려든 T 림프구가 활성화가 되면, T 세포도 감염되게 된다. 잠복감염은 여러 가지 사이토카인 등 을 포함한 면역반응에 의해서 일어나며, 이 때 잠복감염된 세포는 특히 혈중의 T 세포라고 한다. 혈중 MDV 감염세포 는 피부 모낭상피세포, 선장 등 상피세포 유래의 조직에 MDV를 전파 시켜서 이들 조직에서 후기 세포용해성 감염이 일어나게 한다. 후기 세포용해성 감염을 유발하는 것은 이러한 MDV가 감염된 혈중 림프구라는 증거는 혈중의 세포 외에는 감염성 바이러스가 없기 때문이다. 후기 세포용해성 감염이 있는 후 육안적 혹은 현미경적으로 검출이 가능한 림프종이 여러 장기에서 관찰된다. MDV가 감염되면 병변 발생부위에 따라서 다양한 임상증상이 발생한다. 즉 내부장기에 병변이 있을 경우는 침울, 체중감소, 산란율 저하 등이 발생하며, 신경계는 발생부위별 신경증상이 일어난다. 이러한 장기나 조직에서는 육안적으로 백색에서 회백색의 종양성 병변이 관찰된다. 말초신경에 병변이 발생한 경우에는 특히 좌골신경 및 신경총에서 호발하는데, 이들 조직은 편측성 혹은 양측성으로 종창되어 있다. 안구는 간혹 육안적으로 식별이 가능한 홍채 퇴색 및 증식 병변이 관찰된다. 피부형 MD는 특히 육용계에서 문제가 되고 있으며, 산란계의 내장형 MD가 발생한 경우에도 피부를 자세히 설펴보면 피부형 MD를 간혹 관찰할 수 있다. 피부형 MD는 모낭주위에 원형의 결절형태로 발생하는데, 이들 병변이 커지면 바로 옆의 병변과 융합 되어 큰 결절을 형성하기도 한다. (중략)

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.6 s.165
• /
• pp.955-965
• /
• 2007

Safety helmets are used widely in various industries by workers since they are legally required to wear them. However, thermal discomfort is one of the major complaints from helmet users. To relieve this problem, frozen gelled packs can be considered for use inside the helmets. In this paper, tests were performed on humans to evaluate the physiological strains of wearing safety helmets and to investigate the effects of using frozen gelled packs inside the helmets. Experiments were conducted in a climatic chamber of WBGT $33{\pm}1^{\circ}C$ under four differed experimental conditions: 1) not wearing a safety helmet(NH); 2) wearing a safety helmet with frozen gelled pack A(HA); 3) wearing a safety helmet with frozen gelled pack B(HB); and 4) wearing only a safety helmet(OH). The results were as follows. First, when comparing NH with OH, physiological responses such as $\bar{T}_{sk},\;T_r$, HR and sweat rate were significantly higher in OH and subjective sensations were reported as less hot and more comfortable than NH(p<.05). Second, in regard to the frozen gelled packs inserted inside the safety helmets, some physiological responses in HA were different from those in HB, according to the two different types of packs. HA was hotter, more uncomfortable and less exhausted than HB. However, result from both HA and HB were lower than those from OH in terms of temperature and humidity inside safety helmet, sweat rate, $T_r$ increase, heat storage(p<.05). When wearing safety helmets with frozen gelled packs, it was shown that heat strain can be alleviated. These results are expected to help millions of workers who complain that wearing safety helmets is uncomfortable and messy.

• Journal of agriculture & life science
• /
• v.45 no.2
• /
• pp.125-133
• /
• 2011

This study was conducted on greenhouses whose side heights had been raised after the columns of 1-2W basic type greenhouses had been cut and welding with the same-sized pipes. When the wind load or snow load affects restructured pipe greenhouse like this, those parts will be structurally unsafe. To examine this, the bending strength of welded columns were measured through four stages and compared with the pipes in their original condition. Results are as follows. In the case of a bending test on welded joints about steel pipes used for greenhouses, satisfactory results couldn't be drawn because sections of both ends and the loading parts couldn't endure loads and sank regardless of loading methods. Partial problems could be solved by inserting inside pipe(steel bar) at the sections and the loading parts, but it was necessary to devise more satisfactory bending test methods. The strength of welded joints wasn't much different compared with original conditions and demonstrated only slight differences according to the sample production conditions. However, significant incompleteness in the welding process was expected to cause a decisive loss in strength. On the assumption that there were no problems in the welding process or with regard to the inclination of sub materials for columns after connection, it was deemed reasonable to assume that the strength of welded pipes was about 84~90% of the strength of the pipes in their original condition. Considering mid- and long-term strength decline following the onset of rust at joints or welding sections, structural changes in the main sub materials that are used for greenhouses at farmhouses have to be avoided to ensure structural safety, unless these changes are inevitable.

• Economic and Environmental Geology
• /
• v.35 no.3
• /
• pp.211-220
• /
• 2002

The Xiaoxinancha Cu-Au deposit in the Jilin province, located in NNE 800 km of Beijing, is hosted by diorite. The ore mineralization of Xiaoxinancha Cu-Au deposit show a stockwork occurrence that is concentrated on the potassic and phyllic alteration zones. The Xiaoxinancha Cu-Au deposit in the south is being mined with its reserves grading 0.8% Cu, 3.64 g/t Au and 16.8 g/t Ag and in the north, grading 0.63% Cu, 3.80 g/t Au and 6.8 glt Ag. The alteration assemblage occurs as a supergene blanket over deposit. Hydrothermal alteration at the Xiaoxinancha Cu-Au deposit is centered about the stock and was extensively related to the emplacement of the stock. Early hydrothermal alteration was dominantly potassic and followed by propylitic alteration. Chalcocite, often associated with hematite, account for the ore-grade copper, while chalcopyrite, bornite, quartz, epidote, chlorite and calcite constitute the typical gangue assemblage. Other minor opaque phases include pyrite, marcasite, native gold, electrum, hessite, hedleyite, volynskite, galenobismutite, covellite and goethite. Fluid inclusion data indicate that the formation of this porphyry copper deposit is thought to be a result of cooling followed by mixing with dilute and cooler meteoric water with time. In stage II vein, early boiling occurred at 497$^{\circ}$C was succeeded by the occurrence of halite-bearing type III fluid inclusion with homogenization temperature as much as 100$^{\circ}$C lower. The salinities of type 1II fluid inclusion in stage II vein are 54.3 to 66.9 wt.% NaCI + KCI equiv. at 383$^{\circ}$ to 495$^{\circ}$C, indicating the formation depth less than 1 km. Type I cupriferous fluids in stage III vein have the homogenization temperatures and salinity of 168$^{\circ}$ to 365$^{\circ}$C and 1.1 to 9.0 wt.% NaCI equiv. These fluid inclusions in stage III veins were trapped in quartz veins containing highly fractured breccia, indicating the predominance of boiling evidence. This corresponds to hydrostatic pressure of 50 to 80 bars. The $\delta$$^{34}S$ value of sulfide minerals increase slightly with paragenetic time and yield calculated $\delta$$^{34}S_{H2S}$ values of 0.8 to 3.7$\textperthousand$. There is no mineralogical evidence that fugacity of oxygen decreased, and it is thought that the oxygen fugacity of the mineralizing fluids have been buffered through reaction with magnetite. We interpreted the range of the calculated $\delta$$^{34}S_{H2S}$ values for sulfides to represent the incorporation of sulfur from two sources into the Xiaoxinancha Cu-Au hydrothermal fluids: (1) an isotopically light source with a $\delta$$^{34}S$ value of I to 2$\textperthousand$, probably a Mesozoic granitoid related to the ore mineralization. We can infer from the fact that diorite as the host rock in the Xiaoxinancha Cu-Au deposit area intruded plagiogranite; (2) an isotopically heavier source with a $\delta$$^{34}S$ value of > 4.0$\textperthousand$, probably the local porphyry.

• Parasites, Hosts and Diseases
• /
• v.23 no.2
• /
• pp.189-196
• /
• 1985

In order to observe the protein composltlOns of soluble extracts of P. westermani, and their changes during early developmental stages, the crude saline extracts of 4, 6, 8, 10 and 12 week-old worms which were harvested from experimentally infected dogs were analysed by disc-PAGE. The results were as follows: 1. A total of 15 bands were identified from electrophoregrams of respective developmental stages. Of them, 5 bands were recognized throughout the developmental stages. 2. The number and protein amount of identified bands changed according to the worm development from 4 weeks to 12 weeks. However, tLe bar::ding patterns of 4 and 6 week-old worms and 8 and 10 week-old worms were similar each other. 3. Of 15 identified bands, Band 1 was recognized only in 12 week-old worms whereas Bands 3, 4, 8, 9, 10, 11 and 15 gradually lowered their amount according to dcvelor:ment to disappear in 12 week-old. In addition, Band 5 became a major band in 12 week-old while Band 6 turned to a minor band at the same age. The possible relations of changing patterns of protein bands with worm development were discussed.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.3 no.1
• /
• pp.7-13
• /
• 2009

Recently, the interest on walking assistances in order to assist aged people has increased due to the increase of the aged. However, most walking aid systems have a weakness for a slope because they don't have power. So, they have a weak point which makes users difficult to move when they are weak in the legs. That is why the interest on walking assistances with power has increased. The use of the walking aid systems should be easy because most users are old people. Thus, we produce module to grasp walking intent of users by using various sensors such as potentiometer, FSR(Force Sensing Resistance) Sensor and Stretch Sensor and calculate the response time to the module. Firstly, the response time of handlebar which is a kind of potentiometer is 420ms and Resilience of it is 140ms. Secondly, the response time of handlebar which use FSR Sensor is 320ms and Resilience of it is 220ms. Finally, the response time of the Stretch Sensor is 160ms and Resilience of it is 140ms. The performance of Stretch Sensor is the best among the three kind of sensors.

• Journal of The Korean Society of Integrative Medicine
• /
• v.3 no.3
• /
• pp.59-71
• /
• 2015

Purpose : This study examines the effect of vibration exercise grafting PNF patterns for 6 weeks on upper body stability and equilibrium for seniors having fifteen or over of MMSE-K. Method : A total of 10 senior citizens participated in this study. Each participant performed PNF patterned exercises using vibration sports equipment for 30 minutes, once static a week, for six weeks. We measured trunk stability and balance degree before and after the six-week exercise program. Motor Assessment Scale (MAS) was used to measure trunk stability, while Functional Reach Test (FRT) and Timed Up and Go (TUG) was used to measure balance degree. The collected data was processed using paired t-test to confirm the difference between pre-program conditions and post-program conditions. Results: The results of our study show that post-program trunk stability measurements increased when compared to pre-program data; however, this increase was not statistically significant. pre and post-measurements for satatic balance and dynamic balance were statistically unchanged. Conclusion: Due to limitations in the number of participants, the procedural design of this experiment, and the limited amount of time participants actually controlled, this study failed to produce statistically significant results. However, further study should be conducted using a systematically implemented exercise program to show support for exercising with flexi-bar as an effective program for the elderly.

• Journal of the Korea Concrete Institute
• /
• v.24 no.6
• /
• pp.705-714
• /
• 2012

Precast reinforced concrete bridge columns with hollow rectangular section were tested under cyclic lateral load with constant axial force to investigate its seismic performance. After all the precast column segments were erected, longitudinal reinforcement was inserted in the sheath prefabricated in the segments, which were then mortar grouted. Main variables of the test series were column aspect ratio, longitudinal reinforcement ratio, amount of lateral reinforcement, and location of segment joints. The aspect ratios were 4.5 and 2.5, and the longitudinal steel ratios were 1.15% and 3.07%. The amount of lateral reinforcement were 95%, 55%, 50%, and 27% of the minimum amount for full ductility design requirements in the Korean Bridge Design Code. The locations of segment joints in plastic hinge region were 0.5 and 1.0 times of the section depth from the bottom column end. The test results of cracking and failure mode, axial-flexural strength, lateral load-displacement relationship, and displacement ductility are presented. Then, safety of the ductility demand based seismic design in the Korean Bridge Design Code is discussed. The column specimens showed larger ductility than expected, because buckling of longitudinal reinforcing bar was prevented due to confinement developed not only by transverse steel but also by sheath and infilling mortar.