• 한국해양학회지
• /
• 제8권2호
• /
• pp.68-74
• /
• 1973

The present paper concerns the age determination and growth of butter fish, Pampus argenteus from the southwestern waters of Korea by otolith reading. 743 specimens taken by stow-net in the southern part of the Yellow Sea and northeastern part of the East China Sea during the period from October 1972 to September 1973 were examined. Results of the study are summarized as follows: 1. Sex ratio of females to males was found to be 2:1. 2. Ring marks on the otolith were found to be formed twice a year, once during the period of January-May and the other time in September. 3. The Lee's phenomenon was observed on the otolith sample. 4. The relationship between the radius of otolith(R) and fork length(L) was found to be as follows: R=0.3069+0.0133L 5. Calculated fork length at the time of otolith ring formation are found to be as follows:I-ring,71.67mm; II-ring, 125.05mm; III-ring, 168.65mm; IV-ring, 201.74mm; V-ring, 225.80mm; VI-ring, 240.84mm. 6. Maximum fork length calculated according to the diagram of Walford's growth transformation was found to be 281.5mm. 7. Growth curve, when related to the von Bertalanffy's equation, was laid out as $L_{t}=281.5[1-e$^{-0.674(t-0.128)}]$

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.776-781
• /
• 2001

To enhance thermal efficiency of thermal facility through recovery of low and medium temperature waste heat, 1MW organic Rankine cycle system was designed and developed. The exhaust gases of $175^{\circ}C$ at two 100MW power plants in pohang steel works were selected as the representative of low and medium temperature waste heat in industrial process for the heat source of the organic Rankine cycle system. HCFC-123, a kind of harmless refrigerant, was chosen as the working fluid for Rankine cycle. The organic Rankine cycle system with selected exhaust gases and working fluid was designed and constructed. From the operation, it was confirmed that the organic Rankine cycle system is available for low and medium temperature waste heat recovery in industrial process. The optimum operating manuals, such as heat-up of hot water, turbine start-up, and the process of electric power generation, were derived. However, electric power generated was not 1MW as designed but only 670kW. It is due to deficiency of pump capacity for supply of HCFC-123. So it is necessary to increase the pump capacity or to decrease the pressure loss in pipe for more improved HCFC-123 supply.

• 한국환경과학회지
• /
• 제12권5호
• /
• pp.521-527
• /
• 2003

To study the intruded phenomena of North Pacific Ocean around Boso peninsular, water property distribution in the adjacent seas to Japan is studied using the hydrographic data obtained by Japan Maritime Agency and Japan Fisheries Agency from 1973 to 1996, The scattering of water type in T-5 diagram is relatively small in the Kuroshio Region. Both the envelopes of saline side and of fresh side of the scattered data points shifts gradually from saline side to fresh side as the observation Line moves from southwest to northeast. In mixed water region, the scattering of water type increases rapidly as the observation line moves north; the envelope of fresh cold side moves towards fresh cold side much faster than that of saline side. This suggests that the water does not advect along the salinity minimum layer, but the salinity minimum layer can be understood as a boundary of two different waters aligned vertically, We defined the typical water masses as the Oyashio Water and the Kuroshio Water. The water mass below the salinity minimum layer may be created by isopycnal mixing of these two water masses with a fixed mixing rate. While the water mass above the salinity minimum cannot be created simply by isopycnal mixing. The salinity minimum layer may be eroded from upper side due to active minxing processes in the surface layer, while the water of the salinity minimum layer moves gradually southward. This appears to give an explanation why the thermosteric anomaly value at salinity minimun decereases towards south.

• 소성∙가공
• /
• 제17권7호
• /
• pp.466-472
• /
• 2008

In this paper, tension tests and formability tests are performed to construct a database related to mechanical properties and the formability of the AZ31B Mg alloy sheet. A forming test with a hemi-spherical punch is conducted at varying temperatures to establish a forming limit diagram. In order to verify the applicability of the analysis using the conventional flow hardening model, a finite element analysis is performed on the hemi-spherical punch forming process and the results are compared with experimental ones. The study investigates problems involving a computational analysis that does not consider flow softening of the magnesium alloy at elevated temperatures.

• 대한의용생체공학회:의공학회지
• /
• 제11권2호
• /
• pp.195-202
• /
• 1990

The hypothesis of asymmetric resistance to explain the phenomenon of lung hyperinflation (LHI) during hlgh frequency ventilation (HFV) was quantitatively studied. LHI was predicted by modeling the ism-volume pressure-flow (IVPF) data from 5 human subjects using the empirical Rohrer's equation. Non-steadiness during HFV was compensated by em- ploying recently proposed volume-frequency diagram. Tidal volume and ventilation frequency were 100 ml and 20 Hz, respectively. Airflow pattern was a symmetric sinusoid. The predic- tion results of mean pressure drop across the airways were averaged for those 5 subjects, and compared with zero by one-sided student's t-test. A marginally significant (P<0.1) increase in mean pressure drop was observed during HFV at low lung volumes (below FRC) , which could increase mean lung volume up to one liter When the lung volume was above FRC, no significant LHI (P >0.25) was resulted. LHI seemed to be inversely related to the lung volume. These results recommend to clinically apply HFV only at lung volumes above FRC.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.318-321
• /
• 2005

The shell part is made of 2-layered blank because of functional requirements. To investigate the draw formability in this kind of part, the 2-layered sheet metal forming analysis process should be stipulated. First of all, treatment of contact with each blank must be considered to prevent the penetration on the each blank. Subsequently, applying the draw bead force is considered carefully because application of drawbead force for analysis is different with equivalent drawbead force. Formability as like crack, neck and wrinkles is estimated by FLD(Forming Limit Diagram) and thinning. A feasibility of the 2-layered sheet metal forming analysis process study is verified compare 2-layered sheet metal forming analysis with experimental results.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.366-369
• /
• 2008

In this paper, tension tests and formability tests are performed to construct a database related to mechanical properties and the formability of the AZ31B Mg alloy sheet. A forming test with a hemi-spherical punch is conducted at varying temperatures to establish a forming limit diagram. In order to verify the applicability of the analysis using the conventional flow hardening model, a finite element analysis is performed on the hemi-spherical punch forming process and the results are compared with experimental ones. The study investigates problems involving a computational analysis that does not consider flow softening of the magnesium alloy at elevated temperatures.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.387-390
• /
• 2008

Electromagnetic forming (EMF) technology, which is one of the high speed forming methods, has been used for the forming process in various industry fields. Numerical approach by finite element simulation of the EMF process is presented in this study. The implicit code is used to obtain the numerical model of the time-varying currents that are discharged through the coil in order to obtain the transient magnetic forces. In addition, the body forces generated in the workpiece are used as the loading condition to analyze deformation of thin sheet metal workpiece using explicit code. Numerical approach for a dimpled shape by EMF process is carried out and the simulated results of the dimpled shape by EMF are reviewed in view of the deformed shape and formability evaluation.

• 수산해양기술연구
• /
• 제39권1호
• /
• pp.19-26
• /
• 2003

한국 남해 연안 해역인 나로도 주변 어장에서 동계, 춘계, 하계 및 추계에 조사한 해양 관측 자료를 이용하여, 이 어장에서의 수괴 특성을 분석한 결과를 요약하면 다음과 같다. 1) 나로도 주변 어장에서 수온과 염분의 측정값을 이용한 T-S diagram으로부터 염분을 기준으로 수괴를 구분하였다. 연안수는 30.0∼31.4psu, 혼합수는 31.5∼32.9psu, 외해수 33.0∼35.0psu의 범위로 정하였다. 2) 나로도 주변 어장에 출현하는 동계의 염분 분포범위는 33.1∼34.9psu, 춘계는 33.1∼34.3psu, 하계는 30.5∼34.1psu, 추계는 30.1∼34.0psu의 범위이었다. 3) 나로도 주변 어장에 출현한 연안수, 혼합수 및 외해수의 분포 특성을 계절별로 파악할 수 있었다. 동계와 춘계에는 표층에서 저층까지의 전해역이 외해수로 점유되었다. 하계에는 표층의 전 해역이 혼합수로 점유되지만, 저층에는 혼합수와 외해수로 형성된다. 추계에는 표층에 연안수와 혼합수가 분포하고 있으며, 저층에는 혼합수가 주체를 이루고 있으나 연안역에 국한되어 연안수가 분포하고, 외양으로 외해수가 출현하기 시작한다. 4) 나로도 주변 어장의 수온염분 특성은 계절적으로 변화하여, 동계에는 저온고염의 외해수가 분포하고, 춘계에는 동계의 수괴의 특성을 유지하지만, 수온이 다소 증가한다. 하계에는 고온 저염의 혼합수와 외해수가 분포하고, 추계에는 저온의 연안수, 혼합수 및 외해수가 분포한다. 5) 수온과 염분의 변화가 주로 표층과 20m층 사이에서 이루어져 하계에는 수온이 4.$0\circ_C$/7m의 수직경도를 보였으며, 춘계와 추계에는 수온과 염분의 변화는 적고, 동계에는 연직 혼합이 일어나 상하층간에 균질한 해수가 분포하였다.

• 설비공학논문집
• /
• 제8권4호
• /
• pp.527-536
• /
• 1996

Convective nucleate boiling and burnout heat flux have been studied on a flat, downward facing, constant heat flux surface cooled by an impinging water jet. The tests are progressed from low, nonboiling power to high, burnout heat flux power. The jet velocity and the subcooling do not affect the nucleate boiling curve of $q{\sim}{\Delta}T_{sat}$ diagram, but the supplementary water height affects the curve. For the case of dimensionless height of supplementary water S/D=1, the boiling curve shift to the heigher heat flux than that of S/D=0 or S/D=2. Burnout heat flux is enhanced with increasing jet velocity and subcooling. Also. by using the supplementary water(S/D=1 or S/D=2), burnout heat flux is larger than that of the simple water jet(S/D=0). A generalized correlation for the burnout heat flux data in the present boiling system with an impinging water jet is successfully evolved.