• 동력기계공학회지
• /
• 제17권4호
• /
• pp.86-93
• /
• 2013

This paper deals with the effects of driving force and material properties on statistical distribution of fatigue crack growth rate (FCGR) for the friction stir welded joints of Al 7075-T651 aluminum plate. In this work, the statistical probability distribution of fatigue crack growth rate was analyzed by using our previous constant stress intensity factor range controlled fatigue crack growth test data. As far as this study are concerned, the statistical probability distribution of fatigue crack growth rate for the friction stir welded (FSWed) joints was found to evaluate the variability of fatigue crack growth rate for base metal (BM), heat affected zone (HAZ) and weld metal (WM) specimens. The probability distribution of fatigue crack growth rate for FSWed joints was found to follow well log-normal distribution. The shape parameter of BM and HAZ was decreased with increasing the driving force, however, the shape parameter of WM was decreased and increased with increasing the driving force. The scale parameter of BM, HAZ and WM was increased with the driving force.

• 한국정밀공학회지
• /
• 제28권9호
• /
• pp.1070-1077
• /
• 2011

This study intends to assess the defect in the weld zone of titanium grade 2 plate in terms of acoustical anisotropy based on the angle beam method. Depending on the rolling direction, the ratio of wave velocity was found to be 1.08 and the difference in the angle of refraction was more than seven degrees, confirming the presence of acoustical anisotropy. Thus for measuring the length of defect in the weld zone of the titanium plate (thickness of 10mm), the distance amplitude characteristics curves of titanium, TDACC-R and TDACC-T were constructed for the measurements in consideration of the acoustical anisotropy on CRT of the ultrasonic testing equipment. As a result, when the distance amplitude characteristics curve corresponds to the rolling direction, the length of defect was close to the actual measurement within 1mm and when different, the difference was found to be over 4mm. It was affirmed that the acoustical anisotropy should be taken into consideration when measuring the length of defects in the weld zone of the titanium plate with the presence of acoustical anisotropy.

• 대한기계학회논문집A
• /
• 제24권12호
• /
• pp.3088-3095
• /
• 2000

Creep-fatigue crack growth behavior was experimentally measured particularly when a crack was located in the heat affected region of lCr-5Mo steel. Load hold times of the tests for trapezoidal fatigue waveshapes were varied among 0, 30, 300 and 3,600 seconds. Time-dependent crack growth rates were characterized by the $C_r$parameter. It was found that the crack growth rates were the highest when the crack path was located along the fine-grained heat affected zone(FGHAZ). Cracks located in other heat affected regions had a tendency to change the crack path eventually to FGHAZ. Creep-fatigue crack growth law of the studied case is suggested in terms of (da/dt)$_{avg}$ vs. ($C_t$)$_{avg}$ for residual life assessment.

• Journal of Welding and Joining
• /
• 제3권2호
• /
• pp.52-63
• /
• 1985

Fillet welded joints, specially in ship structure, are well known the critical part where stress concentrate or crack initiates and grows. This paper is concerned with the study of the behavior of fatigue crack growth t the root and toe of load carrying cruciform fillet welded joints under three points bending by the determination of stress intensity factor from the J-Integral, using the Finite Element Method. The stress intensity factor was investigated in accordance to the variation of the weld size (H/Tp). weld penetration (a/W) and plate thickness (2a'/Tp). As mixed mode is occurred on account of shearing force under the three points bending, Stern's reciprocal theory is applied to confirm which mode is the major one. The main results may be summarized as follows 1) The calculation formula of the stress intensity factor at the both of root and toe of the joint was obtained to estimate the stress intensity factor in the arbitrary case. 2) The change of stress field around crack tip gives much influence on each other at the roof and toe as H/Tp decreases. 3) Mode I is a major mode under the three points bending.

• 대한조선학회논문집
• /
• 제33권4호
• /
• pp.75-86
• /
• 1996

최근 선박, 해양구조물, 항공기 및 원자력 플랜트 등 대형구조물의 사용조건이 극도로 가혹해짐에 따라 이들에 대한 신뢰성 및 안전성 보장이 심각한 문제로 대두되고 있다. 이들 대형구조물에 있어, 파손사례의 대부분은 어떤 형태로든 피로현상과 관련된 것으로서 수명 및 잔여수명의 예측과 함께 안정성 평가기술의 확립이 절실히 요구되고 있다. 그러나, 실제 대다수의 결함은 복수표면 균열 상태로 존재하며, 이들은 단일균열의 경우와는 달리 급속히 합체, 성장할 가능성이 높고 따라서, 관통수명 또한 짧아지며, 관통시 표면균열의 길이가 상대적으로 커져 불안정 파괴의 위험성도 그만큼 높아지게 된다. 본 연구에서는 평판 및 필릿 용접부에 존재하는 복수의 직렬표면균열을 대상으로 인접균열간 간섭효과, 합체현상을 고찰하여 피로균열 진전거동 및 피로수명 예측프로그램을 개발하고, 이를 기존의 실험결과와 비교, 평가하여 그 정도 및 실용성을 확인하였다.

• Journal of Welding and Joining
• /
• 제20권5호
• /
• pp.78-86
• /
• 2002

A metallurgical model for the prediction of prior austenite grain size considering the dissolution kinetics of M$_3$C precipitates at the heat affected zone of SA508-cl.3 was proposed. The isothermal kinetics of grain growth and dissolution were respectively described by well-known equation, $dD/dT=M({\Delta}F_{eff})^M$ and Whelan's analytical model. The isothermal grain growth experiments were carried out for measure the kinetic parameters of grain growth. The precipitates of the base metal and the specimens exposed to thermal cycle were examined by TEM-carbon extraction replica method. The model was assessed by the comparison of BUE simulation experiments and showed good consistencies. However, there was no difference between the model considering and ignoring $M_3C$ precipitates. It seems considered that pinning force exerted by $M_3C$ Precipitates was lower than driving force for grain growth due to large size and small fraction of precipitates, and mobility of grain boundary was low in the lower temperature range.

• 한국기계가공학회지
• /
• 제19권11호
• /
• pp.102-108
• /
• 2020

The demand for lightweight materials and high-strength steel has rapidly increased to help reduce the weight of a vehicle body; it improves the fuel efficiency of automobiles and provides passenger safety. Additionally, as the material becomes thinner, the demand for its resistance against corrosion becomes higher. Hence, the application of the surface-treated steel sheet has surged rapidly. In this study, a weld bonding experiment using a delta spot welding machine is performed on a thin sheet of a different material (Al6061-T6/GA440). The thickness of the material was kept at 1 mm to reduce the weight of the automobile body parts. Additionally, the purpose of this study is to control the heat input by applying the welding conditions of a multi-stage pressure pattern to improve corrosion resistance shear strength. The analysis of nugget diameter measurement, shear tensile test, and salt spray test was performed to achieve the aim.

• 콘크리트학회논문집
• /
• 제14권6호
• /
• pp.823-829
• /
• 2002

철근콘크리트 기둥-철골 보 합성골조는 철근콘크리트와 철골부재의 재료적인 장점을 살린 합리적인 구조물이나, 이질 재료간의 접합으로 인해 보-기둥 접합부의 설계와 해석에서는 많은 구조적인 문제점들이 생기게 된다. 이 연구에서는 철골 보의 하중이 콘크리트 기둥으로 원활히 전달되면서 현장 시공성이 우수한 새로운 형태의 합성골조 접합부의 형식을 제안하고자 한다. 이 연구에서 고안된 접합부는 H 형강을 반분한 T 형강을 시스템 내부 및 외부의 모든 응력 전달 요소를 연결하는 주요 요소로 하고, 보 플랜지의 인장력 전달을 위해 한 방향은 고강도 강봉을, 이와 직교하는 방향은 강재 연결판을 사용하였다. 스티프너보강된 ㄱ형강을 사용하여 보 플랜지의 인장력을 기둥면에 전달하도록 하였으며, T 형강에 용접된 전단 접합판을 보의 웨브와 고력볼트로 접합하여 전단력을 지지하도록 설계하였다. 이 연구에서는 보의 플랜지로부터 스티프너 보강된 ㄱ형강을 통해 강봉이나 연결판으로 전달되는 휨모멘트 전달성능을 확인하고자 구조성능 시험을 수행하였다. 시험체는 실제 보-기둥 접합부를 모델로 하여, 실물크기로 4개가 제작되었으며, 구조실험은 철골 보의 양 단부를 단순지지한 상태에서 기둥 중앙에 집중하중을 가해 보-기둥 접합부에 휨모멘트와 전단력을 작용시키는 방식으로 진행되었다. 실험결과, 이 연구에서 제안된 접합부는 현장 적용이 가능한 가공성과 운반성 및 시공성을 가지며, 철골 보-접합용 ㄱ형강 -연결용 강봉 및 연결판에 의한 응력전달이 매우 순조로운 것으로 나타났다.

• 비파괴검사학회지
• /
• 제14권3호
• /
• pp.151-156
• /
• 1994

액체나트륨 내부에서의 가시화, 온도 혹은 칫수 측정, 용접부의 비파괴검사 등을 위한 고온(약 $250{\sim}650^{\circ}C$) 액침 초음파센서의 개발이 시도되어 왔다. 본 연구에서는 도파띠를 이용한 고온 액침 초음파센서의 가능성을 수조에서 실험으로 확인하였다. 가장 낮은 차수의 반대칭 판파가 분산이 거의 없는 주파수 영역에서 이용되었다. 이 판파는 주파수가 2.3MHz인 빗살구조 탐촉자에 의해 두께가 1mm이고 폭이 13mm인 스테인리스강 도파띠 내에 여기되었다. 이 판파의 감쇠상수는 공기중에서 1.2dB/m이었고, 물속에서는 380dB/m이었다. $13mm{\times}39mm$ 크기의 빔방사부위로부터 270mm 떨어진 평면 반사체에 대해 25dB의 신호 대 잡음 비를 얻었다.

• Journal of Welding and Joining
• /
• 제34권3호
• /
• pp.69-76
• /
• 2016

Characteristics of dissimilar metal welds between ASTM Type 316L and carbon steel ASTM A516 Gr.70 made with FCAW were evaluated in terms of microstructure, ferrite content, EDS analysis, hardness, tensile strength, impact toughness and corrosion resistance. Three heat inputs of 10.4, 16.9, 23.4kJ/cm were employed to make joints of dissimilar metals with E309LMoT1-1 wire. Microstructure of dissimilar weld metals consisted of mostly vermicular type of ${\delta}$-ferrite and some lathy type of ${\delta}$-ferrite, and ${\delta}$-ferrite was transformed into globular type in reheated zone. In all conditions, weld metals were solidified on FA solidification mode. Based on the EDS analysis of weld metals, All Creq/Nieq values were in the range of FA solidification mode, and it was decreased with increasing heat inputs whereas it was increased with increasing layers. The amount of ${\delta}$-ferrite was decreased with increasing heat input due to the difference of cooling rate, and it was increased with increasing layers. Accordingly, hardness and tensile strength of dissimilar metals weld joints was decreased with increasing heat input while impact energy was increased with increasing heat input. Corrosion test of dissimilar metals weld joints showed that weight gain rate of heat input 10.4kJ/cm was the greatest, and that of three heat inputs became constant after certain time.