• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.1
• /
• pp.46-52
• /
• 1999

A new current controlled PWM t'||'&'||'pound;rlmique with NPC(Neutral Point Qarll)ed) structure is IrOIX>Sed in this paper. A current controlled PWM technique with neutral-JXlint-cIamped pulse-width modulation inverter composed of main switching devices which operates as switch for PWM and auxiliary switching devices to clamp the output terminal potential to the neutral point potential is described. The proposed current controller has a first and second current band The switching pattern will be made by the first current band. According to the second current band, the output state of the switching pattern is changed into positivee and negative state. This inverter output contains less hanronic content and lower switching frequency than that of conventional current controlled PWM technique at the same current limit. Thbe induction machine drive with proposed technique is investigated by commputer simulation.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.5
• /
• pp.457-465
• /
• 2011

The fault analysis and detecting algorithm for a 3 phase diode rectifier is proposed. The 3 phase dioderectifier is used for the AC power rectifier of the PWM inverter. The input power or diode faults cause theripples of the DC voltage, degradation of the control performance and life shortening of the DC link capacitor.In this paper, the ripple of the DC voltage is mathematically analyzed for the earth fault of input power andopen circuit fault of the diode, respectively. The fault detection and type of fault can be obtained by comparingthe average DC voltage and the instant DC voltage which is sampled with 6 times of grid frequency. Theproposed method can be easily applicable and doesn't require additional circuit. The experimental and simulationresults are presented to verify the validity of the proposed method.

• Korean Journal of Materials Research
• /
• v.7 no.3
• /
• pp.213-217
• /
• 1997

AOhf(Hcousto-r)l)tic niodulator) with :!OOlIiz freclucncl- and Sfi(;(Seconrl harmonic generation) green lasel-Lvith 53% nm wavelength were used for Il\'IIII~Dii.it,ii v~ilco disk recorder) FOI rhe appli~aptin of high densit]. optical recording, a high po\ver I ~ c r is r c ~ ~ l i ~ i l - u l ic I !tic. s\-sti,m a n d optic.,~I io;iting l,t)c>rs of each optical device must have a high laser damage threshoid hie rn;itie ant] retlwtive coatings on a $TeO_{2}$ singlc crystal. which is used as an acoustooptic material, by E-beam evaporation method. Laser damage threshold \vas nicdsureci hy Ar laser with the input power oi 0.55LV 1,aser damage threiholti 01 $ZrO_{2}$ and $SiO_{2}$. filn-is were higher than $AI_{2}O_{3}$ f i l m U'e also investigated a long--tern1 stability of the output po\ver of St{(; green laser

• Korean Journal of Food Science and Technology
• /
• v.18 no.3
• /
• pp.234-240
• /
• 1986

Soybean hydrolysate (SHT) was prepared from defatted soybean by hydrolysing with papain and ${\alpha}-amylase$ and water sorption isotherms were determined as a function of proteolysis degree. The moisture content and B.E.T. value of SHT at a certain water activity $(A_w=0.80)$ increased lineraly with increasing degree of proteolysis. However, they changed drastically above 70% proteolysis. The water holding capacity of 78% SHT was similar to that of sorbito. The results indicate the increase of water sorption capacity is due to the release of polar groups through hydrolysis. Mizrahi equation generally gave the best fit for isotherms of SHT. Storage stability of intermediate moisture foods containing $5{\sim}10%$ SHT increased considerably, although some favorable characteristics decreased.

• Resources Recycling
• /
• v.4 no.1
• /
• pp.4-11
• /
• 1995

The amounts of waste stone and stone powder sludge that occurred in the quarry and processing plant of s stone plates, have been increased with the development of stone industry. The manufactunng process of 따tificial s stone was studied to reduce the outlet of these wastes and utilIze them as raw materials for architecture, interior decoration and art work. In order to compare the properties of artiflcial stone with those of natural building-stone, the physi$\alpha$II properties of artificial stone such as specific gravity, absorption ratio, elastic wave velocity, compressive s strength, tensile strength, shore hardness, elasticity and Poission's ratio were measured. From the mesaured d data of physical properties, it was found that physical propertIes of artificial stone were controlled by homogeneous m mixing ratio of constituents, molding pressure, and amount of binder. Also, from the thermo-gravimetric analysis, it was found that artIfIcial stone manufactured had a good thermal stability up to $300^{\circ}C$. It was concluded that t the optimum conditions for manufacturing process of artificial stone were $200kg/\textrm{cm}^2$ of molding pressure, 12-15 w weight % of binder amounts.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.9
• /
• pp.1654-1665
• /
• 2008

This paper presents bit splitting methods to apply multilevel modulation to iterative codes such as turbo code, low density parity check code and turbo product code. Log-likelihood ratio method splits multilevel symbols to soft decision symbols using the received in-phase and quadrature component based on Gaussian approximation. However it is too complicate to calculate and to implement hardware due to exponential and logarithm calculation. Therefore this paper presents Euclidean, MAX, sector and center focusing method to reduce the high complexity of LLR method. Also, this paper proposes optimal soft symbol split method for three kind of iterative codes. Futhermore, 16-APSK modulator method with double ring structure for applying DVB-S2 system and 16-QAM modulator method with lattice structure for T-DMB system are also analyzed.

• Korean Journal of Social Welfare Studies
• /
• no.39
• /
• pp.147-165
• /
• 2008

This Study analysis two features of social citizenship in the period of rights revolution. Discousive arguments are derived from different reinterpretations of social citizenship of Marshall. Some insist that main idea of welfare state is rights of social citizenship and the other insist that social rights is realized after doing duty. Especially the latter emphasis work obligation in which individual responsibility and duty, these discussion underlie wokrfare policy. This reserch examine two contrary discourses based on Marshall's theory, and make a close inquiry into correct interpretation about Marshall. New rights, the Conservative party and New Labour seek for ground on Marshall's citizenship theory, but these are distortion on it. Marshall insisted that citizenship constituted rights and duties but he claimed that discharge of a duty isn't precondition of the exercise of the right.

• Journal of the Korean Magnetics Society
• /
• v.8 no.6
• /
• pp.341-345
• /
• 1998

Magnetic shielding effect of cylinderical ahields made of commericial amorphous ribbons has been studied. The shell-arrangement-order of double shell shield has been found to show a striking differencein shielding factor. In low applied field region, a 2605CO-2705M-shield (outer shell: 2605CO, inner shell: 2705M) yields two times higher shielding factor than a 2705M-2605CO-shield (outer shell: 2705M, inner shell: 2605CO). The reasons are as follows: In case of 2605CO-2705M-shield, the outer shell is not easily saturated and effectively shields the applied field. In addition, the inner shell shows high shielding factor in the field shielded by the outer shell. In case of 2705M-2605CO-shield, the outer shell is saturated at very low-field as well as the inner shell shows low shielding factor in the field shielded by the outer shell.

• Korean Journal of Plant Resources
• /
• v.13 no.3
• /
• pp.213-218
• /
• 2000

Morphological characteristics of 16 collected safflower (Carthamus tinctorius L.)accessions were studied at Gyongbuk A.T.A. Uisong Medicinal Plant Experiment Station in 1998. As for plant height, 5 lines were tall(more than 131cm), which were mainly foreign safflower. Middle and small were 5 and 6 accessions, respectively. Number of branch per plant was 11∼13 in 2 accessions of domestic safflowers while foreign safflowers have more than 50 branches per plant. Leaf shapes were oblong(3 lines), lanceolate(10 lines) and broadly linear(3 lines). There were three types of leaf margin shape which were repand(7 lines), serrate(4 lines) and parted serrate(5 lines). Flower color was white(1 line), yellow(13 lines) and red orange(2 lines). As for flower head shape, 14 lines were conical and 2 lines were flattened. There were thorns on bract of flower head in 11 lines but in 5 lines there were not. Domestic safflower lines had seeds of conical shape. Contrastively, seed shapes of foreign saffower lines were oval.

• Journal of Korean Society of Forest Science
• /
• v.108 no.2
• /
• pp.233-240
• /
• 2019

The aim of this study was to provide basic data that could identify and help prevent a slow-moving landslide using an analysis of the relationship between below-ground characteristics and water from three slow-moving landslide areas in Pohang, Gyeongsangbuk-do, South Korea. Surface surveys, resistivity, seismic exploration, well logging, and boring surveys were conducted in the three areas. The main direction of discontinuous surface was matched with the slope direction of the three landslides. The results indicatedthat slow-moving landslides might occur in the direction of the slope. Underground water was distributed within the crush zones within the three landslide areas and flowed along the tensile cracks. There was a significant difference (p<0.01) between the mean angle of the tensile cracks and that of the underground waterflow (p=0.8019). These results indicated that the progress of a slow-moving landslide can be forecast by monitoring the location and flow of underground water within a known slow-moving landslide area.