• 한국표면공학회지
• /
• 제29권6호
• /
• pp.834-838
• /
• 1996

The diagnosis of the plasma in the facing targets sputtering system was performed in mixture gas of Ar 0.18-0.0 Pa, Xe 0.0-0.18 Pa and $O_2$ 0.02 Pa by using Langmiur's probe and the effect of plasma-damage to surface smoothness and magnetic characteristics of Ba ferrite films was clarified. The electron density $N_e$ and the electron temperature $T_e$ were evaluated at the center of the plasma and at the neighborhood of the anode ring. $T_e$ decreased and $N_e$ increased with increase of $P_{Xe}$ at the center of plasma. For the measurement at the neighborhood of the anode ring, $T_e$ was almost constant and $N_e$ took the minimum value at $P_{Xe}$ of 0.1 Pa, where Ba ferrite films with excellent c-axis orientation and magnetic characteristics were obtained. It was suggested that the restriction of the bombardment of recoiled particles as well as the suppress of plasma-damage were effective for obtaining good surface smoothness and excellent magnetic characteristics and it was useful for decreasing the crystallization temperature of Ba ferrite films.

• 한국세라믹학회지
• /
• 제39권4호
• /
• pp.409-412
• /
• 2002

대기압 하에서 정상적으로 저온 플라스마가 발생 가능한 장치를 개발했다. 개발한 장치는 접지전극을 유전체로 피복한 용량결합형 전극구조로 되어 있다. rf(13.56 M Hz)을 여기 원으로서 사용한 아르곤(Ar) 또는 헬륨(He)은 플라스마 가스로서 사용했다. 발생한 플라스마는 발광분광법, 플로브 진단법에 의해 특성을 검토했다. 그 결과 전자온도>여기온도>가스온도 관계에 있는 비평형 상태의 플라스마였다. 본 장치를 사용하여 발생한 플라스마에 반응가스(CF4)을 첨가해서 대기 개방 계에서 Si(100)식각($1.5{\mu}m$/min)에 적용하여 높은 처리속도를 실현했다.

• Applied Microscopy
• /
• 제52권
• /
• pp.14.1-14.10
• /
• 2022

An electron probe X-ray microanalyzer (EPMA) is an essential tool for studying chemical composition distribution in the microstructure. Quantifying chemical composition using standard specimens is commonly used to determine the composition of individual phases. However, the local difference in chemical composition in the standard specimens brings the deviation of the quantified composition from the actual one. This study introduces how to overcome the error of quantification in EPMA in the practical aspect. The obtained results are applied to evaluate the chemical com position of retained austenite in multi-phase steel. Film-type austenite shows higher carbon content than blocky-type one. The measured carbon contents of the retained austenite show good coherency with the calculated value from the X-ray diffraction.

• 한국인터넷방송통신학회논문지
• /
• 제19권1호
• /
• pp.203-209
• /
• 2019

본 연구에서는 WENNER 4전극법 기반에 GMD(신규 대지 고유 저항 측정 장치)와 측정용 Probe(접지동봉)가 PLC(전력선 통신)로 연결된다. 측정용 Probe는 2개(P1,P2)가 1조로 모두 5조 10개의 Probe가 직렬로 각각 1m, 2m, 4m, 8m, 16m 간격으로 대지(토양)에 설치되어 있다. GMD에서 보낸 PLC 신호를 측정용 Probe 1조(P1)의 수신기가 감지하면 Probe에 부착된 PSD(전력 공급 장치)에서 측정용 미세 전압과 전류가 대지로 흐르게 되고 P1과 P2 사이의 토양을 거쳐 Probe 1조(P2)에 유입 된다. 이때 대지 저항으로 인해 전압 강하가 발생되는 원리로 저항값을 측정하게 된다. 이렇게 1~5조까지 T초 간격으로 대지 저항을 측정하고 측정된 데이터는 메인 장비에 탑재된 Arduino Server에 저장 한다. 저장된 측정 데이터는 옴의 법칙(Ohm's Law)에 의한 수식 R=E/I와 고유저항 ${\rho}=6.28aR$ (여기서, R: 측정저항, E: 측정전압, I: 측정전류, a:Probe 간격, ${\rho}$: 고유저항 )를 통해 고유저항을 얻을 수 있다. 실시간으로 얻어진 데이터를 Main PC에 설치된 CDGES 프로그램과 연동되어 데이터 분석이 가능하게 되고 대지(토양)의 접지 환경을 실시간 모니터링 할 수 있게 된다. 또한, 대지(토양)의 온도, 습도 등 계절의 특성을 파악하여 3D 그래프 지원으로 입체적인 Display가 가능하다. 연구의 한계점은 실험적으로 개발 운용한 모델로 상업적인 접근을 위해 Test Bed의 구체적인 적용 방안이 필요할 것이다.

• ETRI Journal
• /
• 제21권2호
• /
• pp.1-8
• /
• 1999

We analyze the characteristics of a coaxial-to-waveguide transition based on the finite difference time domain (FDTD) method with the cylindrical to rectangular cell interpolation scheme. The scheme presented in this paper is well suited for the analysis of a microwave device with a probe near waveguide discontinuity because perfect TEM mode can be generated inside the coaxial cable by using the cylindrical cell. The scattering parameters of a designed Ka-band transition are evaluated and compared with those of commercially available software, High Frequency Structure analysis Simulator (HFSS) and measured data. There exists good agreement between the measured and calculated data. In order to prove an accuracy of the interpolation scheme, a coaxial to waveguide transition with a disk-loaded probe is analyzed by the present approach and the results of this analysis are compared with measured data. Comparison shows that our results match very closely to those of measurement and other approaches. The method presented in this paper can be applied to analyze the characteristics of a probe excited cavity, coaxial waveguide T-Junctions, and so on.

• Journal of electromagnetic engineering and science
• /
• 제10권4호
• /
• pp.296-302
• /
• 2010

This paper proposes an approximate equation for broad bandwidth conditions in an antenna feeding probe design with a cylindrical magneto material structure (CMMS). The bandwidth calculation has been conducted according to the relation between the distance ($r_m$) between the magneto material and feeding probe, and the magneto material thickness ($t_m$) for a given ${\mu}_r$. The bandwidth of a proposed antenna with CMM feeding structure is improved about 182 %, when ${\mu}_r=20+j0.001$, in comparison with the bandwidth of an antenna without CMMS. The maximum error extent between the bandwidth calculated by the approximation equation and by the numerical calculation of the proposed antenna is about $\pm$3.2 % for ${\mu}_r=10+j0.001$. The approximation equation proposed in this study can solve the conventional problem of the complex process and the long time required for reiterative calculation, and allow simple and precise design with prediction. The accuracy of an approximated equation is compared with the results calculated by a commercial tool and verified by reasonable agreement between them.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권4호
• /
• pp.225-230
• /
• 2004

An electromagnetic actuator has been designed and fabricated for Probe-based data storage applications. The actuator consists of permanent magnets(SmCo) housing and a media Platform which is connected to the Si frame by four couples of Si leaf springs. In order to generate electromagnetic force, Cu coils were electroplated under the media platform. The magnetic field distribution was calculated with 3D Finite Element Method of Maxwell 3D program. The field strength felt by Cu coils was estimated to be about 0.33T when the distance between the media platform and permanent magnets is $200\mu\textrm{m}$. The static and dynamic motions of the actuator were analyzed by FEM method with ANSYS 5.3. The measured displacements of the actuator were about $\pm$$92\mu\textrm{m}$ for input current of $\pm$40㎃ and the resonance frequency was 100Hz. The proposed electromagnetic actuator can be utilized for media driver of probe-based data storage system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권8호
• /
• pp.3962-3980
• /
• 2019

To deal with single sample face recognition, this paper presents a patch based semi-supervised linear regression (PSLR) algorithm, which draws facial variation information from unlabeled samples. Each facial image is divided into overlapped patches, and a regression model with mapping matrix will be constructed on each patch. Then, we adjust these matrices by mapping unlabeled patches to $[1,1,{\cdots},1]^T$. The solutions of all the mapping matrices are integrated into an overall objective function, which uses ${\ell}_{2,1}$-norm minimization constraints to improve discrimination ability of mapping matrices and reduce the impact of noise. After mapping matrices are computed, we adopt majority-voting strategy to classify the probe samples. To further learn the discrimination information between probe samples and obtain more robust mapping matrices, we also propose a multistage PSLR (MPSLR) algorithm, which iteratively updates the training dataset by adding those reliably labeled probe samples into it. The effectiveness of our approaches is evaluated using three public facial databases. Experimental results prove that our approaches are robust to illumination, expression and occlusion.

• 한국융합학회논문지
• /
• 제9권4호
• /
• pp.143-150
• /
• 2018

본 연구는 기체연료레벨 값에 대한 정밀도를 측정하기 위하여 초음파의 음향매칭에 관한 실험적인 분석을 수행한 것이다. 연구 모델은 송신과 수신에너지를 결정시키는 세라믹 어세이 (Ceramic Assay)의 구성요소에 의하여 설계되었다. 실험 장치로는 12V-DC 전원공급장치, Control T1 Board, 오실로스코프 (DSO1072B), 초음파 프로브 그리고 패턴테이블 (Pattern T)able이 사용되었다. 불감지영역에 대한 분석결과 최대피크지점인 2.9V의 시작점을 기준으로 D (0.180m) < E (0.184m) < B (0.204m) < A (0.234m) < F (0.244m) < C (0.247m) 모델 순으로 점차적으로 불감지폭이 증가되는 특성을 확인할 수 있었다. 실험결과로부터 매칭레이어 (Matching Layer)의 치수가 Ø21*3+2t로 설계된 모델에서 가장 우수한 지향성 에너지를 생성할 수 있었다.

• Parasites, Hosts and Diseases
• /
• 제35권2호
• /
• pp.111-118
• /
• 1997

Theileria sergeni의 진단방법으로 Giemsa 염색에 의한 광학현미경적 관찰이 가장 통상 적으로 이용되고 있으나 감염이 아주 적거나 내과성인 경우 검출하기가 매우 곤란하다. 이에 PCR 진단을 위한 대강유전자로서 p33의 염기서열을 이용하여 4개의 oligonucleotide primers. TS1, TS2 ,TS3,, TS4를 작성하였다. 작성된 primer의 각 조합에 따라 PCR한 결과 TS1과 TS4 조합에서는 499 bps, TS1과 TS3 조합에서는 381 bps, TS2와 TS4 조합에서는 365 bps, TS2 와 TS3 조합에서는 247 bps 크기의 산물을 획득하였다 이 PCR산물은 p33 유전자 염기서열 분석을 통한 제한효소처리 및 Southern blot hybridization 방법을 통하여 그 특이성을 확인하였다. Primer의 특이성을 조사한 결과 미감염 백혈구 및 다른 주혈기생충인 Babesic ouota, Anaplosmn marginate에 대해서는 교차 반응을 나타내지 않았다. 또한 야외시료에 PCR 기법을 적용한 결과 Giemsa 염색에 의한 광학현미경적 관찰에서는 64.8%의 양성률을 보인 반면, PCR 진단에서는 본 실험에서 작성된 TS1과 TS4, TS2와 TS3 조합이 공희 88.7%의 양성률을 나타내었다.