• Journal of Electrical Engineering and Technology
• /
• 제9권1호
• /
• pp.190-196
• /
• 2014

In this paper, the characteristics of a defective elliptical aluminum plate are analyzed by three different eddy current testing probes; T/R, T/T, and Impedance probes. The analysis was done by 3D finite element method, and the impedance change of real and imaginary voltage values were analyzed.

• 비파괴검사학회지
• /
• 제26권1호
• /
• pp.25-29
• /
• 2006

In this paper, the eddy current signals come from a pair oi transmit-receive (T/R) pancake coil on ECT array Probe are analyzed with the variations of the lift-of and of the distance between transmit and receive coils. To obtain the electromagnetic characteristics of the probes, the governing equation describing the eddy current problems is derived from Maxwell's equation and is solved using three-dimensional finite element method. Eddy current signals from T/R coils on ECT array probe have quite different characteristics compared with ones from impedance coil on rotating pancake coil probe. The results in this paper ran be helpful when the field eddy current signals from ECT array probe are evaluated.

• 동력기계공학회지
• /
• 제10권3호
• /
• pp.23-31
• /
• 2006

Mean velocities and turbulent characteristics in the three-dimensional flow fields of a gun-type gas burner were measured by using triple hot-wire probe (T-probe) in order to compare them with the results already presented by X-type hot-wire probe (X-probe). Vectors obtained by the measurement of two kinds of probes in the horizontal plane and in the cross section respectively show more or less difference in magnitude each other, but comparatively similar shape in overall distribution. Axial mean velocity component along the centerline shows that the value by T-probe is about ten times smaller than that by X-probe above the range of X/R=3. Also, the axial component of turbulent intensity along the centerline appears the biggest difference between the two probes. Moreover, axial mean velocity component, axial turbulent intensity component and rotational along the Y-directional distance show a big difference between slits and swirl vanes. On the whole, the values by T-probe appear smaller than those by X-probe.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1990년도 제2차 학술발표초록집
• /
• pp.67-67
• /
• 1990

Three non-ionic and two anioinic spin probes, differing in size and substituent, were synthesized. Their mobility in dried nylon 6 film was investicated by the spin probe technique using electron spin resonance spectrometer. When the size of a spin probe was large and the interaction between the probe molecules and polymer chains existed, the mobility of spin probes decreased. From Arrhenius plots of rotational correlation time, one discontinuity point ($T_d$) was determined. The activation energies for rotation below and above $T_d$ were discussed in terms of the mode of probe rotation. Three spin probes could be viewed as azo dyes having a built-in nitroxide radical. Photolysis of them in dimethylformamide and in nylon 6 film was performed by exposure to 254 nm UV light in the presence of air. It was found that dyes having a built-in nitroxide radical showed better photostability than dyes derived from ${\bata}-naphthol$..

• Journal of Electrochemical Science and Technology
• /
• 제13권4호
• /
• pp.431-437
• /
• 2022

As one of the most hazardous and deadliest pathogens, Listeria monocytogenes (LM) posed various serious diseases to the human being, thus designing effective strategy for its detection is of great significance. In this work, by preparing Ti₃C₂T_x MXenes nanoribbon (Ti₃C₂T_xR) as carrier and selecting thionine (Th) acted simultaneously as signal probe and functional monomer, a LM pathogen-imprinted polymers (PIP) integrated probe electrochemical sensor was design to monitor LM for the first time, that was carried out through the electropolymerization of Th on the Ti₃C₂T_xR/GCE surface in the existence of LM. Upon eluting the templates from the LM imprinted cavities, the fabricated PIP/Ti₃C₂T_xR/GCE sensor can rebound LM cells effectively. By recording the peak current of Th as the response signal, it can be weakened when LM cell was re-bound to the LM imprinted cavity on PIP/Ti₃C₂T_xR/GCE, and the absolute values of peak current change increase with the increasement of LM concentrations. After optimizing three key parameters, a considerable low analytical limit (2 CFU mL^-1) and wide linearity (10-10⁸ CFU mL^-1) for LM were achieved. In addition, the experiments demonstrated that the PIP/Ti₃C₂T_xR sensor offers satisfactory selectivity, reproducibility and stability.

• 미생물학회지
• /
• 제44권3호
• /
• pp.212-220
• /
• 2008

본 연구는 Prevotella nigrescens ATCC $33563^T$에 대한 균주 특이 DNA 프로브라고 보고된 Pn10 프로브의 균주 특이성을 한국인에서 분리된 P. nigrescens의 임상분리 균주를 이용하여 검증하고, P. nigrescens ATCC $33563^T$ 균주 특이 PCR 프라이머를 개발하고자 시행되었다. P. nigrescens와 유전학적으로 가장 가까운 Prevotella intermedia를 포함한 구강 내 치주질환 원인균종인 5균종의 표준균주 및 참고균주, 그리고 P. nigrescens와 P. intermedia의 임상분리 균주를 이용하여 Southern blot 분석법을 시행하였다. Southern blot 분석 결과 Pn10 DNA 프로브에 P. nigrescens ATCC $33563^T$ 및 ChDC KB6 두 균주 지놈 DNA가 검출되었다. P. nigrescens KB6 균주에서 Pn10 DNA 프로브와 상동성이 있는 부위를 PCR법으로 증폭(KB6-Pn10)하여 클로닝한 다음 Pn10 DNA프로브와 같이 핵산 염기서열을 결정하여 상동성을 비교하였다. 그 결과 Pn10과 KB6-Pn10의 핵산염기서열간의 Percent identity는 98.8%였으며, divergence는 0.6%였다. Pn10 DNA 프로브의 핵산염기서열을 바탕으로 두 중류 프라이머 쌍(Pn10-F-AC/Pn10-R-AC 및 Pn10-F-A/Pn10-R-A)을 설계 및 제작하여 P. nigrescens ATCC $33563^T$에 대한 균주 특이성을 PCR법으로 검증하였다. 이들 프라이머 쌍들의 민감도(sensitivity) 조사 결과, 이들은 P. nigrescens ATCC $33563^T$ 지놈 DNA 4 pg까지 검출할 수 있음을 알았다. 이상의 연구 결과를 종합하면, Pn10 DNA 핵산염기서열을 바탕으로 설계된 Pn10-F-AC/Pn10-R-AC 및 Pn10-F-A/Pn10-R-A 프라이머 쌍들은 P. nigrescens ATCC $33563^T$를 신속 정확하게 검출하는 수 있어, 균주의 보존적 측면에서 유용하게 이용될 수 있을 것으로 생각된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.225-226
• /
• 2010

• 조명전기설비학회논문지
• /
• 제22권4호
• /
• pp.159-165
• /
• 2008

본 논문에서는 전자기 유한요소 해석을 통하여 배열와전류프로브의 T/R 코일의 와전류탐상 특성을 해석하였다. 신호해석을 위해 사용된 결함은 Notch 결함이며, 결함의 깊이는 관두께를 기준으로 40[%]로 하였으며, 결함의 위치는 관의 내부 및 외부에 있는 것으로 하였다. Transmit 코일을 중심으로 Receive 코일의 위치를 원주방향으로 $0[^{\circ}]$, $30[^{\circ}]$, $60[^{\circ}]$, $90[^{\circ}]$에 위치시키면서 신호해석을 수행하였다. 프로브의 전자기적 특성을 해석하기 위하여 맥스웰 방정식을 이용하여 지배방정식을 유도하였고, 이를 3차원 유한요소법을 이용하여 수치 해석을 수행하였다. 두 종류 결함의 수치해석 비교 결과 내부결함의 신호가 외부결함보다 크게 발생하였고, Transmit 코일에 대한 Receive 코일의 각도 및 위치 변화시 결함신호의 차이를 확인할 수 있었다. ASME 표준 시험편을 이용한 배열와전류 프로브의 와전류탐상 실험신호와 비교결과 유사한 신호를 확인할 수 있었다. 본 논문의 결과는 배열와전류 프로브의 와전류 탐상 신호 평가시 도움이 될 것이다.

• 한국전자파학회논문지
• /
• 제21권9호
• /
• pp.1030-1036
• /
• 2010

본 논문은 다이폴 타입 안테나의 광대역화를 위한 원통형 자성 매질 구조를 가지는 급전 프로브의 시뮬레이션 설계를 제안한다. 저주파수 대역의 확보를 위해 고투자율의 자성체를 설계 계산에서 고려하였다. 광대역 특성은 투자율에 의존하지 않고, 자성체와 급전 프로브 사이의 거리($r_m$)와 자성체의 두께($t_m$)의 조정에 의해 구할 수 있다는 것이 확인되었다. 뿐만 아니라, 원통형 자성 매질의 구조를 가지지 않는 설계 안테나의 크기와 비교하여 약 18 % 정도 소형화시킬 수 있었다.

• Journal of electromagnetic engineering and science
• /
• 제10권4호
• /
• pp.296-302
• /
• 2010

This paper proposes an approximate equation for broad bandwidth conditions in an antenna feeding probe design with a cylindrical magneto material structure (CMMS). The bandwidth calculation has been conducted according to the relation between the distance ($r_m$) between the magneto material and feeding probe, and the magneto material thickness ($t_m$) for a given ${\mu}_r$. The bandwidth of a proposed antenna with CMM feeding structure is improved about 182 %, when ${\mu}_r=20+j0.001$, in comparison with the bandwidth of an antenna without CMMS. The maximum error extent between the bandwidth calculated by the approximation equation and by the numerical calculation of the proposed antenna is about $\pm$3.2 % for ${\mu}_r=10+j0.001$. The approximation equation proposed in this study can solve the conventional problem of the complex process and the long time required for reiterative calculation, and allow simple and precise design with prediction. The accuracy of an approximated equation is compared with the results calculated by a commercial tool and verified by reasonable agreement between them.