• Journal of Energy Engineering
• /
• v.17 no.2
• /
• pp.67-76
• /
• 2008

A thermal-hydraulic integral effect test facility, ATLAS (Advanced Thermal-hydraulic Test Loop for Accident Simulation), has been constructed at KAERI (Korea Atomic Energy Research Institute). Recently several integral effect tests for the reflood period of a LBLOCA (Large Break LOss of Coolant Accident) of the APR1400 have been performed with the ATLAS. In the APR1400 a high flow condition is changed to a low flow condition due to an fluidic device during an operation of the SIT. As the self-controlled fluidic device was not installed in the ATLAS, a set of characterization tests was performed to simulate its injection capability from the SIT for the APR1400 simulation. In the ATLAS the required SIT flow rate in the high flow condition was acquired by installing orifices with an optimized flow area to throttle the SIT discharge line and the low flow condition was achieved by changing the opening of the flow control valve in the SIT injection line. The test results showed that the safety injection systems of the ATLAS could simulate the required high and low flow rates of the SIT for the APR1400 simulation efficiently.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.6
• /
• pp.1011-1019
• /
• 2000

The purpose of this study is to examine the basis of design condition of existing treatment processes, namely, Extended Aeration Process, Conventional Activated Process, High Rate Aeration Process and Modified Aeration Process, by clarifying the correlations of influent wastewater concentration, hydraulic retention time, food-to-microorganism ratio and sedimentation of sludge, as well as to ascertain the feasibility of design, regardless of the existing design condition. In particular, this study made a priority investigation of hydraulic retention time and sludge sedimentation, because sludge sedimentation is the main factor$^{1)}$ which determines the operating conditions of existing treatment processes. Therefore, it is generally known that in case exceeds the sphere of design presented for each treatment, sludge bulking may occur. The results of Lesperance's test$^{1)}$, which formed the basis of design, showed the sphere of loading without security of sludge sedimentation, as in Fig. 1. The reason for sludge bulking in a certain condition, as above, is due to failure in application of optimum loading corresponding to each retention time by employing a few operating condition, which proved to be consecutively workable after years of trials and failures by Lesperance, for test conditions. However, the result of this test showed that in case of proper maintenance of loading. sludge sedimentation can be ensured under 120 SVI. Therefore, this study suggested hydraulic retention time and its corresponding optimum loading, and identified the hydraulic retention time as a determinant of sludge sedimentation. And. on the basis of these findings, this study suggested the feasiblity of UHR(Ultra High Rate), a new operating process, exceeding several times the applicable loading value of High Rate Aeration Process under one hour retention time which has not yet applied to the existing treatment processes.

• Journal of Energy Engineering
• /
• v.8 no.4
• /
• pp.553-559
• /
• 1999

This study has been implemented to investigate various characteristics of coals which are imported from abroad. KIER has developed 1 T/D bench-scale unit, entrained-flow coal-slurry gasification technology to investigate the followings: 1) to assess the appropriate foreign coals for gasification. 2) to establish the data base for gasification phenomena, 3) to minimize the technical risks prior to introduction of commercial scaled IGCC power plant, 4) to develop essential key technologies and to establish operational experiences for coal gasification. The foreign coals used in the gasification are Cyprus and Alaska coals from U. S. A. Cyprus coal(bituminous) and Alaska coal (lignite) were shown about 1.29$0^{\circ}C$. The concentrations of coal-slurry for Cyprus were maintained up to 58%, 62% and 65% in order to enable to feed satisfactorily it into the gasifier without any other problems at feeding systems. However, the Alaska coal was unable to maintain slurry concentration over the 60% due to its high viscosity. During the experiments, $O_2/coal$ ratios in both coals ere maintained from 0.6~1.2, but especially Alaska coal was required excessive oxygen feed due to its high ingerent moisture contents. During the experiments with two different coals, the concentrations of syngas $(H_2+CO)$ were shown as 40~62%, and the heating value of syngas were detected as 1,400~2,050 kcal/N㎥

• Journal of Animal Science and Technology
• /
• v.47 no.1
• /
• pp.115-132
• /
• 2005

This research was conducted to make suggestions for the promotion of research activities in the field of animal resources sciences, and we evaluated the research funding trend and the present status of research funding offered by KOSEF in this field. Comparative portion of the number of research projects and grants in this field to other fields has a tendency to be decreased year by year except recent few years. Researchers in this field have received more research funding from the group-based program than from the individual-based program. Also, they have received less money(per project) than did researchers in the fields of general agricultural sciences and other science and technology. Researchers in this field ranges from 43 to 51 years of age and showed 48 years of average age. It was found that researchers who has been funded in the field of animal resources sciences have showed tendency of publication of more articles to SCI journals in recent 5 years. The strong points of the animal resources of agricultural sciences field in South Korea include: lots of researchers, the establishment of research infra-structure, the excellence in research competitiveness and technology level. However, its weaknesses are: a lack of leadership in relevant societies and institutes, a predicted shortfall of researchers in the next generation and insufficient research productivity. The opportunities include: increasing the importance of the biotechnology industry, activating international cooperation researches and exploring the multitude of possible research areas to be studied. However, some concerns still exist, such as threats from developed countries for the government to open the agricultural market, the reduction of the number of full-time farms and intensification of needs for economic and social effects. The diverse actions and systems based upon the strongpoint, weakness, opportunity and threats above-mentioned are required to encourage research activities in the field of animal resources of agricultural sciences in Korea In addition, researchers in this fields would make an effort to keep pace with international society as well as domestic demands.

• Journal of Broadcast Engineering
• /
• v.13 no.1
• /
• pp.53-61
• /
• 2008

Public Key Broadcast Encryption (PKBE) allows a sender to distribute a message to a changing set of users over an insecure channel. PKBE schemes should be able to dynamically exclude (i.e., revoke) a certain subset of users from decrypting a ciphertext, so that only remaining users can decrypt the ciphertext. Another important requirement is for the scheme to be forward-secrecy. A forward-secure PKBE (fs-PKBE) enables each user to update his private key periodically. This updated private key prevents an adversary from obtain the private key for certain past period, which property is particularly needed for pay-TV systems. In this paper, we present a fs-PKBE scheme where both ciphertexts and private keys are of $O(\sqrt{n})$ size. Our PKBE construction is based on Boneh-Boyen-Goh's hierarchical identity-based encryption scheme. To provide the forward-secrecy with our PKBE scheme, we again use the delegation mechanism for lower level identities, introduced in the BBG scheme. We prove chosen ciphertext security of the proposed scheme under the Bilinear Diffie-Hellman Exponent assumption without random oracles.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.22 no.2
• /
• pp.92-101
• /
• 2020

To prevent and mitigate damage to farms due to heavy snowfall, snow weight information should be provided in addition to snow depth. This study reviews four formulae regarding snow density and weight used in extant studies and applies them in Suwon area to estimate snow weight in Korea. We investigated the observed snow depth of 94 meteorological stations and automatic weather stations (AWS) data over the past 30 years (1988-2017). Based on the spatial distribution of snow depth by area in Korea, much of the fresh snow cover, due to heavy snowfall, occurred in Jeollabuk-do and Gangwon-do. Record snowfalls occurred in Gyeongsangbuk-do and Gangwon-do. However, the most recent heavy snowfall in winter occurred in Gyeonggi-do, Gyeongsangbuk-do, and Jeollanam-do. This implies that even if the snow depth is high, there is no significant damage unless the snow weight is high. The estimation of snow weight in Suwon area yielded different results based on the calculation method of snow density. In general, high snow depth is associated with heavy snow weight. However, maximum snow weight and maximum snow depth do not necessarily occur on the same day. The result of this study can be utilized to estimate the snow weight at other locations in Korea and to carry out snow weight prediction based on a numerical model. Snow weight information is expected to aid in establishing standards for greenhouse design and to reduce the economic losses incurred by farms.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.35-44
• /
• 2020

The purpose of this study is to elaborate the request for proposal (RFP) for the localization parts development support project of core parts carried out by the Defense Agency for Technology and Quality. The RFP is the most important document throughout the localization parts project, including project announcement and developer selection, design and test of the development product, final evaluation, and standardization of the project. However, if the RFP is not established at the beginning of the project, there is an increased risk of business failure due to frequent changes by various reasons. In this study, we recognized the necessity of elaboration of RFP and applied the AHP method for quantitative elaboration. Eight requirements of the RFP related to the mechanical/electrical performance of localized development products and three elaboration methods for each requirement were designed in a hierarchical structure, and each weight was calculated by applying the 5-point scale AHP method. The AHP survey was conducted with 20 developers participating in the localization parts project, and the consistency ratio of the AHP survey result was less than 0.1. The elaboration method with the highest value among the calculated weights is classified, and the analysis results and future research directions of the elaboration method are presented.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.1-9
• /
• 2016

Railroad bridges account for 25% of the entire high-speed rail network. Railway bridges are subject to gradual structural degradation or fatigue accumulation due to consistent and repeating excitation by fast moving trains. Wireless sensing technology has opened up a new avenue for bridge health monitoring owing to its low-cost, high fidelity, and multiple sensing capability. On the other hand, measuring the transient response during train passage is quite challenging that the current wireless sensor system cannot be applied due to the intrinsic time delay of the sensor network. Therefore, this paper presents a framework for monitoring such transient responses with wireless sensing systems using 1) real-time excessive vibration monitoring through ultra-low-power MEMS accelerometers, and 2) post-event time synchronization scheme. The ultra-low power accelerometer continuously monitors the vibration and trigger network when excessive vibrations are detected. The entire network of wireless smart sensors starts sensing through triggering and the post-event time synchronization is conducted to compensate for the time error on the measured responses. The results of this study highlight the potential of detecting the impact load and triggering the entire network, as well as the effectiveness of the post-event time synchronized scheme for compensating for the time error. A numerical and experimental study was carried out to validate the proposed sensing hardware and time synchronization method.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.1
• /
• pp.35-41
• /
• 2020

Fast Fourier transform (FFT) processors have been widely used in various application such as communications, image, and biomedical signal processing. Especially, high-performance and low-power FFT processing is indispensable in OFDM-based communication systems. This paper presents a novel radix-26 FFT algorithm with low computational complexity and high hardware efficiency. Applying a 7-dimensional index mapping, the twiddle factor is decomposed and then radix-26 FFT algorithm is derived. The proposed algorithm has a simple twiddle factor sequence and a small number of complex multiplications, which can reduce the memory size for storing the twiddle factor. When the coefficient of twiddle factor is small, complex constant multipliers can be used efficiently instead of complex multipliers. Complex constant multipliers can be designed more efficiently using canonic signed digit (CSD) and common subexpression elimination (CSE) algorithm. An efficient complex constant multiplier design method for the twiddle factor multiplication used in the proposed radix-26 algorithm is proposed applying CSD and CSE algorithm. To evaluate performance of the previous and the proposed methods, 256-point single-path delay feedback (SDF) FFT is designed and synthesized into FPGA. The proposed algorithm uses about 10% less hardware than the previous algorithm.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.2
• /
• pp.30-39
• /
• 2015

The English Landscape garden and picturesque aesthetics, which was in fashion during the 18th to early 19th century in England, has been accused of making people see the actual garden in terms of a static landscape painting without a synesthetic engagement in nature. As new optic devices such as diorama, panorama, photography, and cinematography were invented, ways of seeing nature transitioned from a perspective vision to a panoramic, that is, modern one. This study intends to uncover signs of this kind of modern vision in the picturesque aesthetics and visual representation of landscape gardener Humphry Repton. German garden theorist Christian Cay Lorenz Hirschfeld contended that the English landscape garden was a new style of designing landscape that followed the principle of the serpentine line, which produced movement in sightlines; thus, he considered garden art as a superior art form among all other genres. The signs of visual motion appear in Repton's sketches of "Red Books". Firstly, he designed systemic routes in his clients' properties by considering different types of movements between walks and drives. Secondly, he often used the visual effects of panoramic views for his sketches in order to allow his clients to experience the human visual field. Lastly, he constructed sequences of sketches in order to provide his clients with an illusion of movement; in other words, Repton's sketches functioned as potential visual media to produce the duration of time in a visual experience. Thus, the garden aesthetics of the time reflected the contemporary visual culture, that is to say, a panoramic vision pertaining to visual motion.