• 자동차안전학회지
• /
• 제8권3호
• /
• pp.22-27
• /
• 2016

As a preliminary research to provide amendment for the engine performance test regulation of two-wheeled vehicles, the engine performance data are investigated in terms of maximum torque, rated power, and engine speed of motorcycles on sales in Korean market. Based on the engine performance database officially published to consumers, some forecasted problems are discussed when the maximum torque and the rated power are measured under the present test standards. EU and Korea regulations on engine performance test are carefully compared in terms of the accuracy of measurement devices, test procedures including data acquisition method, and allowable range of rated power measurement. Complementary items are discussed to eliminate ambiguities in the present regulation and to construct rational regulation system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1066_1067
• /
• 2009

Wind power is one of most promising renewable energy. The output capacity of large wind turbine has been increased for off-shore application. Number of installation of small wind turbine also has been increased for the stand-alone and off-grid application of remote area and recently small wind turbine equipped with lamp on the pole is used for street lamp. Maximum wind energy must be extracted by wind turbine within rated wind speed. Power must be controlled to protect the system such as blade, generator, and power system above the rated wind speed. In this paper, small wind power system of 800W rating for battery charging is implemented and output power control by furling system is verified at wind tunnel test.

• 전기의세계
• /
• 제30권8호
• /
• pp.509-516
• /
• 1981

The optimal control theory is applied to the design of a digital control system for a nuclear reactor. A linear dynamic model obtained at 85% of rated power and a quadratic performance index are used. A minimal order observer used in cascade with the feedback controller is suggested as a state estimator. The total reactor power control is studied in the range of 80% to 100% of rated power, with the steady state and load-following control. The control algorithm considered is suitable for implementation in direct digital control.

• 전기학회논문지P
• /
• 제67권1호
• /
• pp.37-41
• /
• 2018

In this paper, the ESS(Energy Storage System) is interconnected in order to reduce the maximum load in the distribution system and the target location of the ESS is set to be close to the rated voltage. We also applied the weights to nodes with large capacity and number of customers in the system. In the future, the interconnected location of the ESS was determined until 2029 in consideration of the load increase rated of the system. We propose a cooperative decision algorithm of interconnected location of ESS for Power Distribution System.

• 조명전기설비학회논문지
• /
• 제21권1호
• /
• pp.91-97
• /
• 2007

This paper presents a pitch angle controller of a grid-connected wind turbine system for extracting maximum power from wind and implements a modeling and simulation of the wind turbine system on MATLAB/Simulink. It discusses the maximum power control algorithm for the wind turbine and presents, in a graphical form, the relationship of wind turbine output, rotor speed, and power coefficient with wind speed when the wind turbine is operated under the maximum power control algorithm. The objective of pitch angle control is to extract maximum power from wind and is achieved by regulating the blade pitch angle during above-rated wind speeds in order to bypass excessive energy in the wind. Case studies demonstrate that the pitch angle control is carried out to achieve maximum power extraction during above-rated wind speeds and effectiveness of the proposed controller would be satisfactory.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.961-963
• /
• 2000

Most of the application standard of the low-voltage devices have applied one the IEC standard another the UL standard. European union applied the IEC60947-1 standard has not exceed 1000V a.c. or 1500V d.c.. Therefore. it is necessary to the low-voltage device has expended for rated operational voltage with our products. The export of European market shall be made for the CE-Marking in accordance with IEC60947-1 ( Low-voltage switchgear and controlgear). We shall be considered for the requirement with the IEC standard. In this time to study for power supply system at EU ( European union. At that time for design and development in order to the construction and test method among the study for the rated insulation voltage at less then 690V.

• 조명전기설비학회논문지
• /
• 제19권8호
• /
• pp.150-157
• /
• 2005

본 논문에서는 이중여자 유도발전기의 회전자에 back to back 컨버터가 채용된 가변속 풍력터빈 시스템의 모델링과 해석을 나타내었다. 제어시스템의 특성을 파악하기 위해서 시뮬레이션에서는 Psim 프로그램을 사용하여 660[kW] 의 출력정격을 갖는 시스템을 모델로 하였다. 모델링에서는 블레이드 제어 시스템 모델과 회전자와 계통선에 연결된 컨버터 시스템을 모델링 하였다. 풍속의 변화에 따라 원하는 출력을 얻을 수 있도록 피치각을 제어하여 정격풍속 이하에서도 최대출력이 발생하도록 하였고, 정격풍속 이상에서는 회전자 속도를 일정하게 하여 정격출력을 유지할 수 있도록 하였다. 또한 무효전력을 제어하여 출력의 역률을 제어하였다. 제안한 해석방법의 타당성을 검증하기 위하여 풍속변화에 따른 모델 시스템의 시뮬레이션 결과 값들과 제주행원 풍력발전 단지에서 운용되고 있는 V47 660[kW] 시스템의 실측 결과들과 서로 비교 검증하여 제안한 해석 방법의 타당성을 입증하였다.

• 동력기계공학회지
• /
• 제18권4호
• /
• pp.11-16
• /
• 2014

Although smoke emitted from ships is not included in IMO(International Maritime Organiztion) regulation yet, it is one of the substance what is polluting mainly the air. Especially, its concentration is very high when an engine is started and a load is rapidly changed. This is caused by unburned fuel what is injected more than necessary quantity after combustion period. It is possible to decrease smoke concentration emitted at starting engine by controlling fuel injection quantity, but it is concerned that time to rated speed must be spent. Then a governor what can reduce the smoke concentration without a loss of time to rated speed is needed. We adopted a electro-hydraulic governor what can control dual fuel start limit function and achieved very low level of smoke concentration without greater the loss of time to rated speed.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 하계학술대회 논문집
• /
• pp.242-243
• /
• 2010

This paper investigates a power supply of medium voltage with enhanced ignition characteristics for plasma torch. Series resonant half-bridge topology is presented to be a suitable ignition circuitry. The ignition circuitry is integrated into the main power conversion system of a multi-phase staggered three-level dc-dc converter with a diode front-end rectifier. The plasma torch rated for 3MW, 2kA and having the physical size of 1m long is selected to be a high enthalpy source in waste disposal system. The steady-state and transient operations of plasma torch are simulated. The parameters of Cassie-Mary arc model are calculated based on 3D magneto-hydrodynamic simulations. Circuit simulation waveform shows that the ripple of arc current can be maintained within ${\pm}10%$ of its rated value under the existence of load disturbance. This power conversion configuration provides high enough ignition voltage around 5KA during ignition phase and high arc stability under the existence of arc disturbance noise resulting in a high-performance plasma torch system.

• 조명전기설비학회논문지
• /
• 제19권2호
• /
• pp.124-130
• /
• 2005

본 논문에서는 Psim프로그램을 이용하여 가변속 풍력터빈 시스템의 시뮬레이션 모델링과 해석을 수행하였다. 시뮬레이션에서는 제주 행원 풍력발전 단지에 설치되어 운영되고 있는 Vestas V47 660[kW] 시스템을 모델로 하여, 바람 모델, 블레이드 모델, 피치 제어모델과 계통선에 연계된 발전기를 모델링 하였다. 풍속의 변화에 따라 원하는 출력을 얻을 수 있도록 피치각 제어를 수행하여 정격풍속 이하에서는 최대 출력이 발생하도록 하고, 정격풍속 이상에서는 회전자 속도를 일정하게 운전하여 정격출력을 유지할 수 있도록 제어하였다. 제안한 해석방법의 타당성을 검증하기 위하여 풍속변화에 따른 모델 시스템의 실측출력 데이터와 시뮬레이션 결과 값을 서로 비교 검증하였으며, 이 결과 서로 잘 일치함을 알 수 있었다.