• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.3
• /
• pp.198-206
• /
• 2011

This paper presents a new programmable compensation circuit (PCC) for a System-on-Chip (SoC). The PCC is integrated with $0.18-{\mu}m$ BiCMOS SiGe technology. It consists of RF Design-for-Testability (DFT) circuit, Resistor Array Bank (RAB) and digital signal processor (DSP). To verify performance of the PCC we built a 5-GHz low noise amplifier (LNA) with an on-chip RAB using the same technology. Proposed circuit helps it to provide DC output voltages, hence, making the RF system chain automatic. It automatically adjusts performance of an LNA with the processor in the SoC when it goes out of the normal range of operation. The PCC also compensates abnormal operation due to the unusual PVT (Process, Voltage and Thermal) variations in RF circuits.

• Journal of Korea Multimedia Society
• /
• v.18 no.2
• /
• pp.244-252
• /
• 2015

This paper describes the design and implementation of a System-on-a-Chip (SoC) for face recognition to use in wearable/mobile products. The design flow starts from the system specification to implementation process on silicon. The entire process is carried out using a FPGA-based prototyping platform environment for design and verification of the target SoC. To ensure that the implemented face recognition SoC satisfies the required performances metrics, time analysis and recognition tests were performed. The motivation behind the work is a single chip implementation of face recognition system for target applications.

• The KIPS Transactions:PartA
• /
• v.13A no.7 s.104
• /
• pp.589-598
• /
• 2006

In this paper, we describe the development and optimization of an embedded Biuetooth solution on an SoC platform for real-time audio streaming over a Bluetooth wireless link. The solution includes embedded Bluetooth protocol stack and profile simplemented on a virtual operating system for portability, and other optimization techniques to fully exploit the benefits of multimedia-oriented SoC. The optimization techniques implemented in this paper are memory access minimization by using on-chip scratch pad memory, codec library optimization with DSP and parallel memory access instruction set, and dynamic audio quality adjustment regarding current wireless link status. Experimental results show that the optimized solution presented in this paper can support high-qualify audio streaming without the support of external memory.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.7 s.349
• /
• pp.38-49
• /
• 2006

In this paper, a novel concept based on embedded processor and reconfigurable logic is proposed for efficient manufacturing test and design verification. Unlike traditional gap between design verification and manufacturing test, proposed concept is to combine both design verification and manufacturing test. The semiconductor chip which is using the proposed concept is named "SwToC" and SwToC stands for System with Test On a Chip. SwToC has two main features. First, it has functional verification function on a chip and this function could be made by using embedded processor, reconfigurable logic and memory. Second, it has internal ATE on a chip and this feature also could be made by the same architecture. To evaluate the proposed SwToC, we have implemented SwToC using commercial FPGA device with embedded processor. Experimental results showed that the proposed chip is possible for real application and could have faster verification time than traditional simulation method. Moreover, test could be done using low cost ATE.

• Proceedings of the KAIS Fall Conference
• /
• 2009.12a
• /
• pp.190-193
• /
• 2009

The most essential element in wireless sensor network is wireless sensor node which collects environmental information and transmits it to the user application systems. Recently, due to the technological advancement, wireless sensor nodes are become smaller, more intelligent and less power consuming. Especially, SoC(System-on-Chip) technology, which unifies the MCU, RF module, memory and other element inside one chip, plays an important part for miniaturization of sensor node, hence reduces the manufacturing expenses. In this paper, we have designed a miniaturized wireless sensor node for wireless sensor network using commercial SoC technology and discussed about some application scenario and additional considerations.

• ETRI Journal
• /
• v.31 no.6
• /
• pp.732-740
• /
• 2009

This paper describes the implementation of a digital audio effect system-on-a-chip (SoC), which integrates an embedded digital signal processor (DSP) core, audio codec intellectual property, a number of peripheral blocks, and various audio effect algorithms. The audio effect SoC is developed using a software and hardware co-design method. In the design of the SoC, the embedded DSP and some dedicated hardware blocks are developed as a hardware design, while the audio effect algorithms are realized using a software centric method. Most of the audio effect algorithms are implemented using a C code with primitive functions that run on the embedded DSP, while the equalization effect, which requires a large amount of computation, is implemented using a dedicated hardware block with high flexibility. For the optimized implementation of audio effects, we exploit the primitive functions of the embedded DSP compiler, which is a very efficient way to reduce the code size and computation. The audio effect SoC was fabricated using a 0.18 ${\mu}m$ CMOS process and evaluated successfully on a real-time test board.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.892-895
• /
• 2011

Power consumption during testing System-On-Chip (SOC) are becoming increasingly important as the IP core increases in SOC. We present a new algorithm to reduce the scan-in power using the modified scan latch reordering and clock gating. We apply scan latch reordering technique for minimizing the hamming distance in scan vectors. Also, during scan latch reordering, the don't care inputs in scan vectors are assigned for low power. Also, we apply the clock gated scan cells. Experimental results for ISCAS 89 benchmark circuits show that reduced low power scan testing can be achieved in all cases.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.449-450
• /
• 2008

In this paper, we present the design of a system on a chip(SoC) based on Powerline Communication for Power-IT. The SoC deals with power information obtained from analog to digital converter and transmits this data via powerline. We integrate main processor, ADC and PLC function into a chip. Also a FPGA-based emulation system is introduced to evaluate a proposed SoC architecture.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.4
• /
• pp.505-513
• /
• 2017

As mobile systems are performing various functionality in the IoT (Internet of Things) era, network-on-chip (NoC) plays a pivotal role to support communication between the tens and in the future potentially hundreds of interacting modules in system-on-chips (SoCs). Owing to intensive research efforts more than a decade, NoCs are now widely adopted in various SoC designs. Especially, studies on application-specific NoCs (ASNoCs) that consider the heterogeneous nature of modern SoCs contribute a significant share to use of NoCs in actual SoCs, i.e., ASNoC connects non-uniform processing units, memory, and other intellectual properties (IPs) using flexible router positions and communication paths. Although it is not difficult to find the prior works on ASNoC synthesis and optimization, little research has addressed the issues how to convert different protocols and data widths to make a NoC compatible with various IPs. Thus, in this paper, we address important issues on ASNoC implementation to support and convert multiple interfaces. Based on the in-depth discussions, we finally introduce our FPGA-proven full-custom ASNoC.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.1089-1095
• /
• 2005

This paper presents a new low-cost Built-In Self-Test (BIST) circuit for 50Hz low noise amplifier (LNA). The BIST circuit is designed for system-on-chip (SoC) transceiver environment. The proposed BIST circuit measures the LNA specifications such as input impedance, voltage gaih, noise figure, and input return loss all in a single SoC environment.