• 제목/요약/키워드: System-on-Glass

검색결과 1,534건 처리시간 0.027초

기계 하중에 따른 PV모듈 변형 분석 (An analysis of the deformation of PV module under different mechanical loads)

  • 최주호;정태희;송희은;김일수;장효식;강기환
    • 한국태양에너지학회 논문집
    • /
    • 제33권3호
    • /
    • pp.58-66
    • /
    • 2013
  • Recently, PV module that the most important part of the photovoltaic system is more widened to lower manufacturing costs for module. However, the broad PV module results to the serious mechanical damage corning from installation circumstances such as snow, wind etc of snow and finally lead to the dramatic degradation of the electrical behavior of PV module. In this paper, 3 kinds of PV modules that consist of the different thickness and area of front glass and the diverse cross sectional structures of the frame are prepared for this experiment. The drooped length and electrical outputs of the PV modules are measured by means of applying 600Pa mechanical load to the PV modules from 1200Pa to 5400Pa base on the mechanical load test procedure of K SC IEG 61215 standard. The simulation data are obtained by the simulation tool as ANSYS and those are validate by comparing with the those experimental results figure out relations between the deformation and the constituent part of PV module.

폐쇄형 식물생산 시스템에서 태양광 채광시스템 연구 (Evaluating Solar Light Collectors for Use in Closed Plant Production Systems)

  • 이상규;이재수;이현동;백정현;노시영;홍영신;박종원
    • 한국환경과학회지
    • /
    • 제28권5호
    • /
    • pp.521-526
    • /
    • 2019
  • In this study, a solar light collector that collects and transmits solar light required for crop production in a closed plant production system was developed. The solar light collector consisted of a Fresnel lens for collecting solar light, and a tracking actuator for tracking solar light from sunrise to sunset to increase the light collection efficiency. The optical fiber that transmitted solar light was made of Glass Optical Fiber (GOF), and it had an excellent optical transmission rate. After collecting the solar light, the amount of light was measured at 5, 10, 15, 20, 25, and 30 cm distances from the GOF through the darkroom by using a light sensor logger connected to a quantum and pyranometer sensor. Compared with solar light, the light intensity of pyranometer sensor measured at 5 cm was 114% higher than solar light, and 61% at 10 cm. In addition, it was observed that it is possible to transmit the necessary amount of light for growing crops up to about 15 cm (as over 22%) through GOF. Therefore, adding diffusers to the solar light collector should be expected to replace artificial light in plant factories or plug seedlings nurseries for leafy vegetables. More studies on the solar light collection devices and the light transmission devices that have high light collection efficiency should be conducted.

How adjustment could affect internal and marginal adaptation of CAD/CAM crowns made with different materials

  • Hasanzade, Mahya;Moharrami, Mohammad;Alikhasi, Marzieh
    • The Journal of Advanced Prosthodontics
    • /
    • 제12권6호
    • /
    • pp.344-350
    • /
    • 2020
  • PURPOSE. Recently introduced hybrid and reinforced glass ceramic computer-aided design/computer-aided manufacturing (CAD/CAM) materials have been used for full-coverage restorations. However; the effect of adjustment and type of materials on internal and marginal adaptation are unknown. This study aimed to evaluate and compare the marginal and internal adaptations of crowns made of three different CAD/CAM materials before and after adjustment. MATERIALS AND METHODS. One acrylic resin maxillary first molar was prepared and served as the master die. Thirty-six restorations were fabricated using CAD/CAM system (CEREC Omnicam, MCXL) with three materials including lithium disilicate (IPS e.max CAD), zirconia-reinforced lithium silicate (Suprinity), and hybrid ceramic (Enamic). Internal and marginal adaptations were evaluated with the reference point matching technique before and after adjustment. The data were analyzed using mixed ANOVA considering α=.05 as the significance level. RESULTS. The effect of adjustment and its interaction with the restoration material were significant for marginal, absolute marginal, and occlusal discrepancies (P<.05). Before adjustment, Suprinity had lower marginal discrepancies than IPS e.max CAD (P=.18) and Enamic (P=.021); though no significant differences existed after adjustment. CONCLUSION. Within the limitations of this study, crowns fabricated from IPS e.max CAD and Suprinity resulted in slightly better adaptation compared with Enamic crowns before adjustment. However, marginal, axial, and occlusal discrepancies were similar among all materials after the adjustment.

Analysis of fruit growth and post-harvest characteristics of hydroponically grown 'K3' melons (Cucumis melo L.) harvested at different days after fruit setting and stored at low temperature

  • Jung-Soo Lee;Ju Youl Oh
    • 농업과학연구
    • /
    • 제49권2호
    • /
    • pp.341-355
    • /
    • 2022
  • This research was to examine the differences in post-harvest quality of melons depending on the harvest time after fruit setting. Musk melon cultivar 'K3' plants were grown in glass house conditions with a hydroponic system, and the fruits were harvested at 50, 60, and 70 days after fruit setting. The post-harvest characteristics of melons stored at 7℃ were measured over 32 days. The harvested fruits at 50, 60, 70 days after fruit setting did not differ significantly in weight, height, or size. Solid sugar content was highest in the fruits harvested at 70 days after fruit setting, but firmness, L* value, and respiration rate were highest in the fruits harvested at 50 days after fruit setting. When the harvested melons were stored at 7℃, 'K3' melons responded differently according to the harvest days after fruit setting. The major changes during storage of 'K3' melons can be summarized as follows: Firmness, respiration, moisture content, and general appearance index during storage were highest in the melons harvested at 50 days after fruit setting, but soluble solid content, fresh weight loss, and sensory evaluation were high in the melons harvested at 60 and 70 days after one. During storage at 7℃, there were no significant differences in the appearance of 'K3' melons harvested at different periods after fruit setting, but difference in soluble solid content and taste were noted. It is recommended that the fruit of 'K3' melon plants be harvested about 60 days after fruiting to provide consumers with the highest quality for taste and for storage.

Structure and Physical Properties of Fe/Si Multiayered Films with Very Thin Sublayers

  • Baek, J.Y;Y.V.Kudryavtsev;J.Y.Rhee;Kim, K.W.;Y.P.Le
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2000년도 제18회 학술발표회 논문개요집
    • /
    • pp.173-173
    • /
    • 2000
  • Multilayered films (MLF) consisting of transition metals and semiconductors have drawn a great deal of interest because of their unique properties and potential technological applications. Fe/Si MLF are a particular topic of research due to their interesting antiferromagnetic coupling behavior. although a number of experimental works have been done to understand the mechanism of the interlayer coupling in this system, the results are controversial and it is not yet well understood how the formation of an iron silicide in the spacer layers affects the coupling. The interpretation of the coupling data had been hampered by the lack of knowledge about the intermixed iron silicide layer which has been variously hypothesized to be a metallic compound in the B2 structure or a semiconductor in the more complex B20 structure. It is well known that both magneto-optical (MO0 and optical properties of a metal depend strongly on their electronic structure that is also correlated with the atomic and chemical ordering. In order to understand the structure and physical properties of the interfacial regions, Fe/Si multilayers with very thin sublayers were investigated by the MO and optical spectroscopies. The Fe/si MLF were prepared by rf-sputtering onto glass substrates at room temperature with a totall thickness of about 100nm. The thicknesses of Fe and Si sublayers were varied from 0.3 to 0.8 nm. In order to understand the fully intermixed state, the MLF were also annealed at various temperatures. The structure and magnetic properties of Fe/Si MLF were investigated by x-ray diffraction and vibrating sample magnertometer, respectively. The MO and optical properties were measured at toom temperature in the 1.0-4.7 eV energy range. The results were analyzed in connection with the MO and optical properties of bulk and thin-film silicides with various structures and stoichiometries.

  • PDF

학교 쓰레기 처리현황과 개선에 관한 연구 - 서울시 공립 초.중등학교를 대상으로 - (A Study of School Waste Disposal Status and Its Reforms (Public Primary and Secondary Schools in Seoul))

  • 노성빈
    • 한국환경교육학회지:환경교육
    • /
    • 제3권1호
    • /
    • pp.130-140
    • /
    • 1992
  • The purpose of this study was to survey the trends of waste products in schools, its gathering and disposal, identification of problems and to analyze its disposal. Moreover, this study was aimed at basic suggestions about the establishment and plans of waste environmental education. 98 public primary and secondary schools were surveyed in Seoul during the month of March and April, 1991. Information was collected from each educational association by random sampling. Questionaries were used for this survey. To understand the disposal status of school waste and its reforms, this study surveyed the amount of waste by products, their origin and analyzed the disposal by type, one number of schools and teachers involved. The dump sited and disposal methods of school waste, its problems, and the status of school waste educations were researched, and ideal disposal methods and plans for waste education were suggested. The results were as follows. 1. The School's trash was produced by followings: paper, vinyle plastics, food, woods, metals, ceramics, glass, bottles, and ash from the heating system. The biggest cause of the school's waste as shown by the survey was a lack of environmental awareness(39.8%). The second biggest was the use of a one time use of disposable paper products(27.6%). 2. Waste collection by different grade levels were proven to be important but as you move from elementary to high school, the waste collecting operation decreased, in this connection between the students and waste collection itself it was significant on the other hand the teachers were not working as significant variables. 3. Of the school that collected waste 69.5 percent of the schools separately grouped common waste and recyclable waste. 25 schools(42.4%) received improvement on their environmental awareness of trash collection through this method. 4. From the number of disposal sites in surveyed schools, it was determined that the education of the necessity for separation of waste was performed in vain and accordingly the should require a real education in the future. 5. Regarding the method of disposal of waste the survey indicated that the #1 method of disposal was partial burning and the remains carried to a dump site by others(35,7%). In elementary schools the entire waste was taken by individuals to a dump site (33.3%). In high schools partial burning and then transported by individuals #1 in our survey(50%). 6. Relative to the problem of the treatment to waste, the emission of smoke from the burning was considered to be the #1 priority in our survey (62.3%) the problem of trash collection being delayed was 52.1%(1in our survey). 7. The present situation of environmental education of waste us lacking. Under present circumstances, the practice of public announcements for improvement and waste-paper collection has been going on vigorously but lacking in education as to the preparation of compositions for students the themes of public exhibitions, the organizing of voluntary associations should be part of the education system to reinforce student's awareness of proper waste disposal. 8. The most economical alternative for disposal was recycling usable waste or combustible material through a variety of education we can therefore educate students bring this education to their homes public servants will also be able to benefit in the waste disposal process with proper education. In conclusion we should intensify the systemical organization and the education of our waste disposal for a better environment.

  • PDF

로우터리 날의 마모(磨耗)에 의(依)한 단면형상변화(斷面形狀變化)가 경운소요(耕耘所要)토오크에 미치는 영향(影響) (The effect of the changing of the edged shape of rotary blade by wearing on tilling torque requirement)

  • 김성래;권순구
    • 농업과학연구
    • /
    • 제11권2호
    • /
    • pp.264-269
    • /
    • 1984
  • 단면(單面)의 로우터리 경운(耕耘)날이 양면(兩面)보다 경운소요(耕耘所要)토오크를 절감(節減)시키는 데 효과적(效果的)이란 결과(結果)에 대(對)하여는 앞서의 연구(硏究)에서 보고(報告)한 바 있으며, 본(本) 연구(硏究)는 경운작업(耕耘作業)에 의(依)한 날의 마모과정중(磨耗過程中) 양(兩), 단면(單面) 형상(形狀)의 경운(耕耘)날이 경운소요(耕耘所要)토오크의 절감효과(節減效果)가 지속(持續)되는가를 구명(究明)하기 위(爲)하여 포장실험(圃場實驗)을 실시(實施)하였다. 양(兩), 단면(單面)의 공시(供試)날은 동일(同一) 로우터리 축(軸)에 부착(附着)시켜 미경운토양(未耕耘土壤)에서 포장작업(圃場作業)을 실시(實施)하여 매(每) 3시간(時間)마다 마모량(磨耗量)을 측정(測定)하였으며, 계량(計量)한 날의 경운소요(耕耘所要)토오크는 실험실(實驗室)에서 Soil bin system 을 이용(利用)하여 측정(測定)하였으며, 분석(分析) 결과(結果)를 요약(要約)하면 다음과 같다. 1. 로우터리 경운작업(耕耘作業)을 실시(實施)하는 동안 날의 단면형상(斷面形狀)의 원형(原形)은 변화(變化)하지 않았으며, 단면(單面)인 날이 양면(兩面)보다 전(全) 내용시간(耐用時間) 동안 최대경운소요(最大耕耘所要)토오크는 5~10%, 평균경운소요(平均耕耘所要)토오크는 3~15% 절감(節減)하는 것으로 분석(分析)되었다. 2. 일반적(一般的)으로, 경운소요(耕耘所要)토오크는 경운(耕耘)날의 형상(形狀)이 유지(維持)되는 12시간(時間)까지는 감소(減少)하였으나, 그 후(後)에는 날의 tip형상(形狀)의 변형(變形)에 의(依)하여 증가(增加)하는 것으로 나타났다. 이것은 날의 tip형상(形狀)이 경운소요(耕耘所要)토오크에 영향(影響)을 미치는 요인(要因)이라고 분석(分析)할 수 있으며, 이에 대(對)한 연구(硏究)는 계속(繼續)되어져야 할 것으로 사료(思料)된다.

  • PDF

종합비타민 액제의 안정성에 대한 연구 (Studies on the Stability of Multivitamin Solutions)

  • 박홍구
    • Applied Biological Chemistry
    • /
    • 제43권1호
    • /
    • pp.39-45
    • /
    • 2000
  • 본 연구에서는 종합비타민 액제중의 비타민 A, $B_1,\;B_2,\;B_6$, C의 안정성을 규명하기 위하여 경시함량 변화 및 분해속도를 동력학적으로 검토하였다 종합 비타민 액제의 제조에 있어서 지용성 비타민의 가용화를 위하여 계면활성제인 polysorbate 80과 용해보조제인 프로필렌글리콜을 병용하므로써 첨가제의 양을 최소화시킬 수 있었다. 종합 비타민 액제의 안정성 평가를 위한 가속시험에서 heterogenous solution system에서의 반응 기작이 그대로 나타나는 것은 아니겠지만 비타민 A는 zero-order, 비타민 $B_1$과 C는 first-order kinetics에 따르는 분해 양상을 나타내었으며 Arrhenius식을 이용하여 구한 비타민 A, $B_1$, 및 C의 활성화 에너지는 각각 26.27, 21.67 및 23.50 kcal/mol이고 상온$(25^{\circ}C)$에서의 유효기간은 각각 1493, 449 및 639일 이었다. 그리고 비타민 $B_2$ 광퇴색 속도식은 first-order kinetics의 분해양상을 나타내었으나 광희색 반응에 미치는 비타민 $B_2$ 초기농도$(C_0)$ $0.544{\times}10^2{\sim}1.632{\times}10^{-2}M$의 영향을 고려하여 비타민 $B_2$의 광퇴색 반응은 다음과 같은 속도식으로 진행되는 것으로 판명되었다. $-{\frac {dc}{dt}}=K_{c}\;{\frac C{C_0}}$ $K_c\;:\;C_0$에 따르는 상수 비타민 $B_6$의 안정성은 인공광원보다 태양광선에 의한 비타민 $B_6$의 광분해가 촉진되었고 그리고 태양광선에 의한 계절에 따른 분해는 모두 비슷하였다. 한편 용기에 의한 비타민 $B_6$의 광분해는 폴리에틸렌용기>갈색유리병>투명유리병 순으로 안정함을 나타내었다 이상의 실험결과로 종합비타민 액제 설계의 안정성의 기초적 실험에 기여되리라고 사료된다.

  • PDF

Nature of the Interfacial Regions in the Antiferromagnetically-coupled Fe/Si Multilayered Films

  • Moon, J.C.;Y.V. Kudryavtsev;J.Y.Rhee;Kim, K.W.;Lee, Y.P.
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2000년도 제18회 학술발표회 논문개요집
    • /
    • pp.174-174
    • /
    • 2000
  • A strong antiferromagnetic coupling in Fe/Si multilayered films (MLF) had been recently discovered and much consideration has been given to whether the coupling in the Fe/Si MLF system has the same origin as the metal/metal MLF. Nevertheless, the nature of the interfacial ron silicide is still controversial. On one hand, a metal/ semiconductor structure was suggested with a narrow band-gap semiconducting $\varepsilon$-FeSi spacer that mediates the coupling. However, some features show that the nature of coupling can be well understood in terms of the conventional metal/metal multilayered system. It is well known that both magneto-optical (MO) and optical properties of a metal depend strongly on their electronic structure that is also correlated with the atomic and chemical ordering. In this study, the nature of the interfacial regions is the Fe/Si multilayers has been investigated by the experimental and computer-simulated MO and optical spectroscopies. The Fe/Si MLF were prepared by rf-sputtering onto glass substrates at room temperature with the number of repetition N=50. The thickness of Fe sublayer was fixed at 3.0nm while the Si sublayer thickness was varied from 1.0 to 2.0 nm. The topmost layer of all the Fe/Si MLF is Fe. In order to carry out the computer simulations, the information on the MO and optical parameters of the materials that may constitute a real multilayered structure should be known in advance. For this purpose, we also prepared Fe, Si, FeSi2 and FeSi samples. The structural characterization of Fe/Si MLF was performed by low- and high -angle x-ray diffraction with a Cu-K$\alpha$ radiation and by transmission electron microscopy. A bulk $\varepsilon$-FeSi was also investigated. The MO and optical properties were measured at room temperature in the 1.0-4.7 eV energy range. The theoretical simulations of MO and optical properties for the Fe/Si MLF were performed by solving exactly a multireflection problem using the scattering matrix approach assuming various stoichiometries of a nonmagnetic spacer separating the antiferromagnetically coupled Fe layers. The simulated spectra of a model structure of FeSi2 or $\varepsilon$-FeSi as the spacer turned out to fail in explaining the experimental spectra of the Fe/Si MLF in both intensity and shape. Thus, the decisive disagreement between experimental and simulated MO and optical properties ruled out the hypothesis of FeSi2 and $\varepsilon$-FeSi as the nonmagnetic spacer. By supposing the spontaneous formation of a metallic ζ-FeSi, a reasonable agreement between experimental and simulated MO and optical spectra was obtained.

  • PDF

Effects of Central Interleukin-1 on the Cardiovascular Response in Hemorrhaged Rats

  • Kang, Joon-Ho;Jang, Jae-Hee;Ahn, Dong-Kuk;Park, Jae-Sik
    • The Korean Journal of Physiology and Pharmacology
    • /
    • 제8권2호
    • /
    • pp.89-94
    • /
    • 2004
  • The arterial pressure is regulated by the nervous and humoral mechanisms. The neuronal regulation is mostly carried out by the autonomic nervous system through the rostral ventrolateral medulla (RVLM), a key area for the cardiovascular regulation, and the humoral regulation is mediated by a number of substances, including the angiotensin (Ang) II and vasopressin. Recent studies suggest that central interleukin-1 (IL-1) activates the sympathetic nervous system and produces hypertension. The present study was undertaken to elucidate whether IL-1 and Ang II interact in the regulation of cardiovascular responses to the stress of hemorrhage. Thus, Sprague-Dawley rats were anesthetized and both femoral arteries were cannulated for direct measurement of arterial pressure and heart rate (HR) and for inducing hemorrhage. A guide cannula was placed into the lateral ventricle for injection of IL-1 $(0.1,\;1,\;10,\;20\;ng/2\;{\mu}l)$ or Ang II $(600\;ng/10\;{\mu}l)$. A glass microelectrode was inserted into the RVLM to record the single unit spike potential. Barosensitive neurons were identified by an increased number of single unit spikes in RVLM following intravenous injection of nitroprusside. I.c.v. $IL-1\;{\beta}$ increased mean arterial pressure (MAP) in a dose-dependent fashion, but HR in a dose-independent pattern. The baroreceptor reflex sensitivity was not affected by i.c.v. $IL-1\;{\beta}$. Both i.c.v. $IL-1\;{\alpha}\;and\;{\beta}$ produced similar increase in MAP and HR. When hemorrhage was induced after i.c.v. injection of $IL-1\;{\beta}$, the magnitude of MAP fall was not different from the control. The $IL-1\;{\beta}$ group showed a smaller decrease in HR and a lower spike potential count in RVLM than the control. MAP fall in response to hemorrhage after i.c.v. injection of Ang II was not different from the control. When both IL-1 and Ang II were simultaneously injected i.c.v., however, MAP fall was significantly smaller than the control, and HR was increased rather than decreased. These data suggest that IL-1, a defense immune mediator, manifests a hypertensive action in the central nervous system and attenuates the hypotensive response to hemorrhage by interaction with Ang II.