• Journal of Internet Computing and Services
• /
• v.10 no.5
• /
• pp.195-209
• /
• 2009

The embedded software has been become more important than the hardware in mobile systems in ubiquitous society. The improvement models such as CMMI(Capability Maturity Model Integration) and SPICE(Software Process Improvement and Capability dEtermination) are used to improve the quality of software in general systems. Software process improvement is also necessary for mobile embedded software development to improve its quality. It is not easy to apply the general software improvement model to the mobile embedded software development due to the high cost effectiveness and heavy process. On the other hand, XP has the characteristics on focused communications with customers and iteration development. It is specially suitable for mobile embedded software development as depending on customer's frequent requirement changes and hardware attributes. In this paper, we propose a framework for development small process improvement based XP(eXtreme Programming)'s practice in order to accomplish CMMI level 2 or 3 in mobile embedded software development at the small organizations. We design and implement the Mobile Embedded Software Process Improvement System(MESPIS) to support process improvement. We also suggest the evaluation method for the mobile embedded software development process improvement framework with CMMI coverage check by comparing other process improvement model. In the future, we need to apply this proposed framework to real project for practical effectiveness and the real cases quantitative. It also include the enhance the functionality of MESPIS.

• Journal of The Korean Association For Science Education
• /
• v.24 no.5
• /
• pp.805-813
• /
• 2004

Our educational system clearly places much greater value on left hemisphere learning. Students who process information in other ways are at a serious disadvantage and may not be learning efficiently. Since mind mapping emphasizing visual and spatial language, it helps students to use the whole brain and promotes more effective comprehension. The purpose of this research was to determine the effects of the instruction using mind map on the science achievement of students. A pretest-posttest control group design was employed. Subjects were 153 male and female, first grade students in a middle school. A control group of 83 was instructed with a traditional teaching method, and an experimental group of 70 was instructed by using a mind mapping strategy. Two groups were treated for 50 hours during 17 weeks. Tolerance's 'Style Of Learning And Thinking(SOLAT)' was used to assess students' lateralization preferences. A 30-item multiple choice posttest was used to assess students' achievement. To analyze the data, we used an analysis of covariance(ANCOVA) and i-tests. It was found that 21.6% of students was left brain dominant, 31.4%, right brain dominant and 47.1 % was integrated style. There was no gender difference in hemispheric dominance. Significant differences existed between the test scores when they were taught by using a mind map. Mind mapping turned out to be a valuable learning technique for the right brain students, helping them to achieve the same level of subject mastery as left brain students. There was a significant difference between males and females in relation to mind map application. Female scored significantly higher than males.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.6
• /
• pp.584-597
• /
• 2011

In this paper, low-loss and high-power RF SP6T switch chips are designed, fabricated and measured for GSM/EGSM/DCS/PCS applications using WIN Semiconductors 0.5 ${\mu}m$ pHEMT process. We utilized a combined configuration of series and series-shunt structures for optimized switch performance, and a common transistor structure on a receiver path for reducing chip area. The gate width and the number of stacked transistors are determined using ON/OFF input power level of the transceiver system. To improve the switch performance, feed-forward capacitors, shunt capacitors and parasitic FET inductance elimination due to resonance are actively used. The fabricated chip size is $1.2{\times}1.5\;mm^2$. S-parameter measurement shows an insertion loss of 0.5~1.2 dB and isolation of 28~36 dB. The fabricated SP6T switch chips can handle 4 W input power and suppress second and third harmonics by more than 75 dBc.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.2
• /
• pp.157-162
• /
• 2018

The increase of risk in port due to the increase in ship size and sea level rises, the standard crown height will increase. In this study, cruise and container ships will need to raise their crown height due to the projected wind pressure areas becoming larger due to the ships' size increase. The mooring assessment was evaluated with the rise of the crown height. The cruise ship of GT 100,000 tons exceeded the permissible breaking force of the mooring line under the crown height conditions of wind speed of 30 kts when the wind direction was $45^{\circ}$ to the direction of the bow. Also, the elevation angle of the pier and mooring line was analyzed and exceeded the crown height, and it was determined that it is necessary to adjust the crown height. Container ships of DWT 100,000 tons were analyzed to exceed the limit of sway motion at the crown height and it was determined that they need to be adjusted to the minimum crown height standard.

• YAKHAK HOEJI
• /
• v.41 no.1
• /
• pp.60-73
• /
• 1997

In order to design a 24 hr sustained release preparation of sulindac for oral administration, fast release pellet (FR), slow release pellet (SR) and two combined formulation (1 : 1 and 1 : 2) were prepared. The pharmacokinetic effect of such preparations has been evaluated using rabbits as a suitable in vivo model, and tested in man. Dose determination was carried out using curve fitting according to RSTPJP II program. In bioavailability test using rabbit, AUCs of sulindac in a few designed formulations were similar to each other. $C_{max}$- of RF and SR were 1.8 times and 1.2 times higher, respectively, compared to that of combined formulation (FR:SR=1:1). While plasma concentration of FR and SR decreased rapidly, that of combined formulation (FR:SR 1:1) lasted at the level close to $C_{max}$ for 24 hrs. Plasma concentration of sulfide form from the combined pellet(FR:SR=1:1) lasted for 24 hrs, and its AUC value was 1.4-fold, 2.7-fold. and 1.2-fold greater than FR pellet, SR pellet and combined pellet (FR:SR 1 : 2). Thus, the combined pellet of 1:1 ratio was found to be the most effective for oral sustained release formulation. Bioavailability test in human showed that AUC of sulfide from TSRP (1 : 1) was approximately 1.5 times greater than total AUC of Immbaron$^{\circledR}$ administered twice in a day. While $T_{max}$ of sulfide from lmmbaron$^{\circledR}$ was 4.33 +/- 1.37 hr (lst administration) and 3.33 ${pm}$ 0.82 hr (2nd administration), respectively, that of sulfide from TSRP increased to 7.17 ${pm}$ 2.86 hr. Plasma concentration of sulfide from TSRP was sustained at more, than 1.0 ${\mu}g{\cdot}$hr/ml until 24 hrs after one dose administration. In addition, TSRP may decrease local adverse reaction in the stomach, since plasma concentration of sulfide from the combined pellet was low within 2hrs in the stomach. In conclusion, it is suggested that TSRP formulation may be effective for oral 24 hr sustained release formulation of sulindac dosing 300 ~ 350mg once a day.

• Korean Journal of Agricultural Science
• /
• v.17 no.1
• /
• pp.45-51
• /
• 1990

This study was conducted to obtain basic data for the design of cooling system by the test of engine performance of the power tiller being used widely in the rural area. Among the various factors affecting engine performance, the flow rate of cooling water was considered as the major factor in this study. Motoring loss, output, fuel consumption ratio, torque, heat absorption of cooling water, and thermal efficiency were measured and analyzed based on three flow rates of cooling water such as 15, 20, and $25{\ell}/min$. The results obtained were as follows : 1. Motoring loss of the engine was 1.371 kW at 2,200 rpm., and mechanical efficiency was 79.1% at rated output level. 2. Output power of the engine increased with the flow rate of cooling water increased. 3. BSFC was 282.9g/kW-h at the flow rate of $20{\ell}/min$, and the temperature of cooling water at outlet was $80.9^{\circ}C$. 4. There was a little variation of torque of the engine depending on the flow rate of cooling water. 5. Absorption of heat by cooling water was increased with the increase of flow rate. 6. The highest thermal efficiency of 32.3% at the flow rate of $20{\ell}/min$ was observed.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.5
• /
• pp.316-325
• /
• 2012

In this study, we suggested adequate control technology by analyzing emission process and main chemical of VOC/HAPs generated from four paint factories in Busan area. And we estimated whether Kapok fiber, which is a natural material, can be commercially used for an absorbent by testing adsorption ability. As a result of this sturdy, above 60% of VOC/HAPs was volatilized and dispersed inside the working place without conducting control system of facilities during manufacturing paints. Concentration profile of VOC/HAPs, which is volatile naturally outside the factories, is surveyed above 70% at Toluene, Ethylbenzene, and Xylene. And a result of evaluation of odor attribution level about the component whose Odor Threshold is known, it is estimated that major cause material of A, B, C factories is Toluene and that of D factory is m/p-Xylene. And that result presented design arguments such as facilities specifications, activated carbon filling volume, and replace cycle of activated carbon as control technology. Also, that result presented emission process improvement such as adsorption of central-controlled ventilation device, installation of inlet flenge, and potable cleaning process. The rate of pollutant adsorption of Kapok fiber, which is natural material, is indicated about 91.9%, 66.7%. That result validated the possibility as replacement of activated carbon.

• Journal of Distribution Science
• /
• v.11 no.1
• /
• pp.55-63
• /
• 2013

Purpose - As the members of the baby boomer generation have retired in earnest, the start-up market has received more attention than ever before. According to recent statistical data, an increasing number of entrepreneurs are in their fifties. There has been a continuous increase in promotional materials on small business issues published by start-ups. This means that senior start-ups have increased in number. A number of support systems have been established for youth start-ups, but there are few government support policies in place for the senior start-up market. Thus, this study suggests a number of constructive alternatives from the perspective of government policy and marketing strategy for entrepreneurs, in order to generate competitiveness in the start-up process, through examining the current state of the senior start-up and by diagnosing extant problems. Research design, data, methodology - This study gives a number of options regarding the government's support policies and the securing of competitiveness in order to vitalize senior business start-ups. As for the government's support policies, funding support policy, publicizing business start-up policies, and operating systematic mentoring policies before retirement have all been covered. In particular, in order for senior business start-ups to become competitive, development through mutual relations with diverse policies is urgently needed. The aging population is becoming an issue in Korea, so businesses for the aged, and the creation of jobs for these people, will become a social issue. Senior business start-ups are playing an important role in expanding enterprise productivity, in addition to enhancing national competitiveness. Expanding senior business start-ups is important, because they also serve to expand the national infrastructure. Productivity increase through continuous expansion is thus recommended. Results - In order to expand the competitiveness of business start-ups, marketing-related observations and learning in regard to customers are necessary for the baby boomer generation, and competitiveness for seniors is urgently needed. Conclusions - Studies on the business start-up policies for the domestic baby boomer generation are almost non-existent, and systematic studies on small businesses are necessary. Only the government is providing statistical studies for small businesses, and such research remains at a general level for entrepreneurs. Therefore, a support system that can actually assist entrepreneurs is essential. Continuous business start-up studies with respect to the baby boomers should be vitalized, to invigorate studies on competition. In order to supplement and strengthen foundational support, senior business start-ups must develop various competitive capabilities with a focus on the customer. The government and the various stakeholder agencies and organizations involved with start-up businesses must find ways to offer support to founders. Such support should include access to knowledge and legal and consultancy services in order to incubate the rapid increase in start-ups founded by seniors. Government support projects should be expanded to meet this end.

• Journal of the Korea Concrete Institute
• /
• v.22 no.1
• /
• pp.113-122
• /
• 2010

Corrosion of prestressing tendons and wire fractures in grouted post-tensioned prestressed concrete bridges have been considered as a serious safety problem. In bridge evaluation the condition of prestressing tendons should be inspected, and if corroded tendons are found, the loss of tendon area should be included when we calculate the ultimate strength. In the previous study, it was evaluated that continuous acoustic monitoring techniques could be considered as a reliable non-destructive method for detecting wire fractures of fully grouted post-tensioned prestressing tendons. In the present study, an experimental test was performed for detecting wire fractures of post-tensioned prestressing tendons which are prestressed lower than current design level. A 10 m prestressed concrete beam was fabricated, which included two tendons prestressed 66 percentage and 40 percentage of tensile strength, respectively. The corrosion of two tendons was induced by an accelerated corrosion equipment and the test beam was monitored by using seven acoustic sensors and a continuous acoustic monitoring system. From each prestressing tendon, two acoustic signals of wire fractures were successfully detected and source locations were estimated within 20 mm error. Based on the test results, it is considered that continuous acoustic monitoring techniques can be applied to detect low-prestressed wire fracture in fully grouted post-tensioned prestressed concrete beams.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.4
• /
• pp.355-362
• /
• 2009

Many of residential buildings, which have pilotis in lower stories to meet the architectural needs, are recently constructed in Korea. Usually, infill walls located in the upper stories of these buildings may cause a soft first story, which is very weak from the earthquake resistance. In the design of the buildings, the infill walls of upper stories are usually considered as non-structural elements and thus they are not included in the analytical model. However, the infill walls may affect the seismic behavior of the residential buildings. Therefore, the differences in seismic behaviors of RC buildings with and without masonry infill walls are required to be investigated. In this study, seismic fragility analyses were performed for masonry infilled low-rise RC moment-resisting frames. And seismic behaviors of RC moment-resisting frame with/without masonry infill walls were evaluated. Two types of structural system with the same frame and different allocation of infill walls are used to evaluate the influence of masonry infill walls on seismic behavior of RC moment-resisting frames. The infill walls were modeled as bi-equivalent diagonal struts. The fragility analyses show that the seismic performance of RC moment-resisting frames with soft story is below the desirable building seismic performance level recommended by current seismic codes, indicating high vulnerability of RC moment-resisting frames with soft story.