• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.2
• /
• pp.93-100
• /
• 2009

This paper presents a step up four channel DC-DC converter using charge pump voltage doubler structure. Our goal is to design and implement DC-DC converter for capacitive SP4T RF MEMS switch in front end module in wireless transceiver system. Charge pump structure is small and consume low power 3.3V input voltage is boosted by DC-DC Converter to $11.3{\pm}0.1V$, $12.4{\pm}0.1V$, $14.1{\pm}0.2V$ output voltage With 10MHz switching frequency. By using voltage level shifter structure, output of DC-DC converter is selected by 3.3V four channel selection signals and transferred to capacitive MEMS devices. External passive devices are not used for driving DC-DC converter. The total chip area is $2.8{\times}2.1mm^2$ including pads and the power consumption is 7.52mW, 7.82mW, 8.61mW.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.6
• /
• pp.613-622
• /
• 2013

In this paper, an inductive clamping class-E power amplifier has been tested for wireless power transmission at ISM band, 13.56 MHz. The implemented power amplifier is designed to operate stably without destroying power transistor in wireless power transmission system which basically keeps not to align between a transmitting antenna and a receiving antenna. The power amplifier is also designed to enhance harmonic filtering characteristic. The amplifier was tested with a DC supply voltage of 28 V and input power of 25 dBm at 13.56 MHz. The test results show the output power level of 43 dBm, the difference power level between fundamental frequency and second harmonic frequency of more than 55 dBc, the dc current consumption of 830 mA, and the high power-added efficiency of 85 %. Finally, the implemented power amplifier operated normally with 830 mA DC current consumption from 28 V source when the two antennas were aligned, and the power transmission was successful. But when the two antennas were not aligned, its DC current consumption automatically decreased down to 420 mA to protect the switching transistor.

• Journal of Distribution Science
• /
• v.13 no.4
• /
• pp.65-76
• /
• 2015

Purpose - This article aims to present and test a model regarding franchisors' supporting activities that may positively influence franchisees' attitude toward the franchising headquarter and their own business performance. Moreover, the authors examine the moderating effect of competitive intensity between franchisee attitude and business performance. Most previous research focused on behavioral performance measurements such as satisfaction, trust, and commitment. There are few empirical studies that focus on financial performance data because it is difficult to determine a relational mechanism between behavioral and financial performance. Moreover, financial data is confidential and difficult to collect in many cases. However, this study measures financial performance (e.g., sales revenue per square meter) differently than most previous research, which is mostly focused on the behavioral performance measurements. Research design, data, and methodology - To test our hypotheses, we selected 137 franchisee managers who are running chains of one of the foremost bakery franchise brands in South Korea. This study carefully investigated the reliability, content validity, convergent validity, and discriminant validity of the proposed instrument by analyzing the data obtained from the samples. The data was analyzed using the AMOS structural equation modeling program. Results - The results indicated that: non-financial support activities (e.g., information exchange and communication) had a positive impact on the franchisee attitude toward the franchising headquarter. The franchisee attitude in turn had a positive effect on the headquarters' business performance. Furthermore, competitive intensity could enhance the relationship between franchisee attitude toward franchising headquarter and business performance in a local franchise market. However, financial support activities (e.g., rewards and promotional support) and training had no relationship with either franchisee attitude or business performance. Conclusions - This study provides some practical implications to franchisors in terms of franchise operation and store opening strategies. With respect to the franchise operation strategy, franchisors need to focus on non-financial rather than financial support. Most franchisees consider the necessity of financial support activities and not their sufficiency because these activities are specified in their franchise contract. In addition, it is important for franchisees to maintain a positive attitude for the franchise headquarters. The franchisees with a positive attitude for the franchisor can show a high degree of solidarity for various support activities, and it consequently determines franchisees' sales performance. In terms of franchise store opening strategy, this study suggests an additional criterion that can be considered in determining the location of direct and non-direct management stores (e.g., franchisees' stores). In this research, franchise stores located within high level of competitive intensity are shown to have a high relationship between franchisee attitudes of franchisor support activities and business performance compared to the franchisees located within low competitive intensity level. This result shows that opening non-direct franchise stores is more effective than direct stores in higher competitive market situations. Research contribution, implications, and further research directions are discussed at the end of the paper.

• Environmental and Resource Economics Review
• /
• v.21 no.1
• /
• pp.27-67
• /
• 2012

This paper analyzed the effect of transaction costs on the prices and trading volumes at the initial stage of emission markets and also examined how the size of the effect differs depending on the characteristics of the transactions. We built trading protocols modeling a recursive process to search the trading partner and make transactions with several behavioral assumptions considering the situations of early markets. The simulations results show that adding transaction costs resulted in reduction of trading volumes. Furthermore, the speed of reduction in trading volume to the increase of transaction costs is higher when there is scale economy. With a certain level of scale economy, the trading volumes abruptly fall down to almost zero as the transaction cost gets over a certain level. This suggests the possibility of a failed market. Since the scale economy is thought to be significant in the early stage of emission trading market, it is desirable to design a trading system that maximizes trading volumes and minimizes unit transaction costs at the outset. One of the alternatives to meet these conditions is to establish a centralized exchange and take measures to increase trading volumes.

• Journal of the Korean Society for Railway
• /
• v.20 no.2
• /
• pp.165-172
• /
• 2017

High frequency squeal noise can be generated when a railroad vehicle runs a sharp curved section; this noise causes environmental complaints and excessive wear on the wheel and the railroad track. In this paper, curved squeal noise experiments on a commercial railway were carried out to investigate this phenomenon. The relationship of the squeal noise pressure level, the frequency characteristics, the railway running speed, and the modal behavior of the wheel were investigated. At the same time, the lateral motion of the wheel relative to the rail was captured using a video camera; wheel movement was calculated when the noise was generated. queal noise occurred at the highest level at the inner front wheel; this phenomena is considered to be related to the lateral vibration response characteristics of the wheel. It can be seen that the magnitude of this squeal noise is not directly related to the increase in vehicle speed.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.2
• /
• pp.145-150
• /
• 2005

An extensive numerical analysis is carried out to investigate the slope stability of the wasted mine tailing landfill constructed by the utilization of fine recycled-concrete aggregates. To do this, first, the physical and mechanical properties of the fine recycled-concrete aggregates and the wasted mine tailing are investigated, and the settlement and the change of material properly of the fine recycled-concrete aggregates resulted from reaction with water are also examined. The $OH^-$ elution from the fine recycled-concrete aggregates reacted with water slightly causes the change of material properties such as porosity, permeability and waster absorption, but the settlement does not happen noticeably. The results of numerical analysis of the landfill slope built with wasted mine tailing and recycled-concrete aggregates in alternate layer indicate that slope stability increases with decreasing the slope ratio, with decreasing the groundwater level inside slope, and with increasing the depth of fine recycled-concrete aggregate layer. Based on this study, thus, engineers working in related to the wasted mine tailing landfill design and construction using the fine recycled-concrete aggregates should be considered the slope ratio, the groundwater level, the depth of fine recycled-concrete aggregate layer.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.7C
• /
• pp.675-686
• /
• 2005

In this paper, we propose an efficient face region detection technique for the content-based video summarization. To segment video, shot changes are detected from a video sequence and key frames are selected from the shots. We select one frame that has the least difference between neighboring frames in each shot. The proposed face detection algorithm detects face region from selected key frames. And then, we provide user with summarized frames included face region that has an important meaning in dramas or movies. Using Bayes classification rule and statistical characteristic of the skin pixels, face regions are detected in the frames. After skin detection, we adopt the projection method to segment an image(frame) into face region and non-face region. The segmented regions are candidates of the face object and they include many false detected regions. So, we design a classifier to minimize false lesion using CART. From SGLD matrices, we extract the textual feature values such as Inertial, Inverse Difference, and Correlation. As a result of our experiment, proposed face detection algorithm shows a good performance for the key frames with a complex and variant background. And our system provides key frames included the face region for user as video summarized information.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.2D
• /
• pp.227-235
• /
• 2011

At present, the characteristics of drivers are not properly considered when informations are provided via VMS even though the Variable Message Signs(VMS) are one of the key information provision medias on the roads. In this study, the driver's psychological response(stress index) was evaluated using a driving simulator for the position of the VMS provided, the contents of the VMS provided, the size of characters on VMS, and types of VMS expression. It was appeared that the stress is the least when the position of the VMS provided 1.5km proceeded from exit, the contents of the VMS provided are time information and types of VMS expression are character form respectively and the size of characters on VMS is appeared not important. In addition, the change of the users' satisfaction level was measured when increasing the numbers of VMS on unit distance and the size of characters. The size of character was almost not effected in similar to the result of stress index and the satisfaction level increased when increasing the number of VMS on the unit distance. The results of this research can be utilized as basic data for the ITS system design and operation stages.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.19 no.4
• /
• pp.684-695
• /
• 1995

The purpose of this study was to investigate the influence of the mechanical properties on drapability in the peach skin-like finished fabrics. For this study, the samples used were 50 kinds of peach skin-like finished fabrics. The mechanical properties such as tensile, shearing, bending, compressional, surface characteristic values, thickness and weight were measured with a KES-F system and drupe coefficient by drape tester. The relationship between the characteristic values and drape coefficicients of the peach skin-like finished fabrics results were obtained. 1. Peach skin-like finished fabric had $\pm$2o range of shearing, bending, compression, surface. properties, thickness and weight as compared with Japanese women's thin fabrics. The characteristic mixing values were better with the values of WC/T, W/T, etc. as compared with that of japanese women's thin fabrics. Accordingly, the peach skin-like finished fabrics had a little volume, excellent hanging and drapability as compared with japanese women's thin fabrics. 2. The drape coefficient of peach skin-like finished fabric had a high level of correlation between 2HB, G, WC, MIU, WT, MMD, 2HG, RT, W, B etc. of the mechanical properties. The blocked properties that contributed to the drape coefficient of peach skin-like finished fabrics were in the order of the bending> tensile> thickness> weight properties. This drape coefficients(DC) were found by measuring the mechanical properties according to the obtained regress on equate on. DC=99.0179+17.9023 log G -17.0543 log 2HG5+17.2104 log 2HG+35.7685 log 2HB+ 4.6082 log B-30.5906 log T+4.2308 log W 3. The contribution to the drape coefficient of the characteristic mixing values of peach skin-like finished fabric was in the order of > 2HB/W> 2HB/B> B/W The drape coefficients were found by measuring the characteristic mixing values according to the obtained regression equation. 4. The drape coefficients of peach skin-like finished fabrics were influenced by the differences between the bending of warp direction, bending of weft direction, shearing etc which in turn determine the level of hanging. The regression equation was as follows; 5. The drape coefficients of peach skin.like finished fabrics had a highly positive correlation with the node index. It has an negative correlation with number of nodes.

• Design & Manufacturing
• /
• v.11 no.2
• /
• pp.1-8
• /
• 2017

In this study, we applied microcellular foaming injection molding process to improve the performance of system air-conditioner drain fan which had been produced by injection molding process and studied the optimization of process conditions through 6-sigma process and response surface method (RSM) to reduce weight and deformation of products. Additive type, melt temperature, mold temperature, and injection screw shape were selected as the factor affecting the weight and deformation of the products by carrying out analysis of trivial many through ANOVA and design of experiment (DOE) method. Among the effect factor, we set the addictive type to Long G/F and screw shape to foaming screw which had the highest level of weight reduction and deformation reduction. The amount of foaming agent gas was set at 60 ml, which was the limit beyond which the weight of product did not decrease any more. For melt temperature and mold temperature, we studied the conditions where both weight and deformation were minimized using the RSM. As a result, we set the melt temperature to $250^{\circ}C$, fixed mold temperature to $20^{\circ}C$, and moving mold temperature to $40^{\circ}C$. The improvement effect was analyzed by appling the selected optimal conditions to the production process using the microcellular foaming injection molding. The results showed that the mean weight of product was measured to be 1,420g which was 19% lower than that measured in the current process. The standard deviations of the weights were found to be similar to those in the current process and it showed a low dispersion. The mean deformation was measured to be 0.9237mm, which represented a 57% reduction compared to the mean deformation in the current process, and the standard deviation decreased from 0.3298mm to 0.1398mm. Moreover, we analyzed the process capability for deformation, and the results showed that the short-term process capability increased from 2.73 to 6.60 which was even higher than targeted level of 6.0.