• 한국전자파학회논문지
• /
• 제25권10호
• /
• pp.966-982
• /
• 2014

본 논문에서는 고속 디지털 시스템에서 발생하는 잡음에 의해 RF 시스템의 특성이 열화되는 현상(RF interference: RFI)에 관한 시스템 레벨의 EMC 분석 기술과 주요 잡음원인 고속 디지털 시스템에서의 EMC 대책 기술을 소개하고 분석하였다. 현재 하나의 전자기기에서 시스템 간 발생하는 EMI/EMC 문제는 더욱 심각해지고 있으며, 특히 디지털 시스템의 EMI에 의한 RFI 문제는 주요 관심 문제로 인식되고 있다. 따라서 본 논문에서는 현재까지 연구되어진 부품 레벨부터 시스템 레벨까지의 RFI 연구에 대하여 소개하고 분석하였다. 그리고 이 문제를 해결하기 위해서 주요 잡음원 중의 하나인 고속 디지털 인터페이스에서 발생하는 공통모드 잡음의 발생 원인과 그에 대한 대책 연구에 관하여 분석하였다. 마지막으로, 앞으로 RFI 문제를 해결하기 위한 시스템 레벨의 EMC 분석 및 대책 연구방향을 제시하였다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.340-344
• /
• 2008

The importance of the more efficient cogeneration system is emphasized. Also the more clean energy is needed at recent energy system. The cogeneration system using Lean burn engine is more preferred to the system using Rich burn engine because of the electrical efficiency. Although the cogeneration system using Lean burn engine is economically preferred, because of the NOx emission level, the system using Rich burn engine with 3-way catalyst can only be used in Korea. The NOx regulation level is 50ppm at oxygen level 13%. The cogeneration hybrid system using Lean burn engine is up to be optimized because of the large amount of the extra-fuel at the after-burner system. The after-burner system at different concept was applied. The reduction time for the activation temperature of the DeNOx catalyst was achieved by making a hole between the combustor and boiler. Because of the lowered fuel consumption, the lowered temperature level was optimized by blocking the hole of the boiler The optimized cogeneration hybrid system consumes $76Nm^3/h$ LNG to produce 150kW electricity compared to before optimization $103Nm^3/h$ LNG. The system was accurately evaluated and the result is following ; 90% total efficiency, below 10 ppm NOx, 50ppm CO, 25ppm HC. The cogeneration hybrid system can meet the current NOx level and exhaust gas regulation. It can achieve the clean combustion gas and efficient cogeneration system.

• 전기학회논문지
• /
• 제63권2호
• /
• pp.325-330
• /
• 2014

In order to operate trains both mainline railroad platform and metropolitan subway line platform, it is necessary to develop the door step equipment of the rolling stock regardless of low(500mm, mainline) and high level platforms(1,135mm, metropolitan subway line) because of the requisite door safety system. In this study, TMS-DCU interface is studied for low and high level railway platforms. As a result, Design circuit of TMS(Train Management System)-DCU(Door Control Unit) interface is suitable for telescopic sliding type doorstep unit to minimize damage to the carbody underframe of railway vehicles.

• Asia pacific journal of information systems
• /
• 제15권2호
• /
• pp.121-148
• /
• 2005

This study focuses on MRO e-Marketplace and attempts to research how companies select the structure of e-Marketplace governance and how it influences purchasing performance. Furthermore, a longitudinal study is conducted to analyze the dynamic relationship between variables in our research model. The research gives the following results. First, as the utilization level of e-Marketplace increases, the level of relational exchange between purchasing company and e-Marketplace increases. The increased utilization level enhances purchasing efficiency rather than reducing purchasing price. Secondly, as the level of relational exchange between purchasing companies and e-Marketplace increases, system integration increases, whereas supply externality decreases. Accordingly, system integration improves purchasing efficiency, whereas the low supply externality does not help lower purchasing price. Third, compared to the initial growth stage, the stable stage of e-Marketplace has the significantly increased level of relational exchange and purchasing efficiency through system integration, rather than the reduction of purchasing price by supply externality.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.790-795
• /
• 1994

This paper describes multiple fault diagnosis method in complex system with hierarchical structure. Complex system is divided into subsystem, item, component. For diagnosing this hierarchical complex system, it is necessary to implement special neural network. We introducd to Hierarchical Artificial Neural Network(HANN) for this purpose. HANN consists of four level neural network, first level for symptom classification, second level for item fault diagnosis, third level for component symptom classification,forth level for component fault diagnosis. Each network is multi layer perceptron with 7 inputs, 30 hidden node and 7 outputs trainined by backpropagation. UNIX IPC(Inter Process Communication) is used for implementing HANN with multitasking and message transfer between processes in SUN workstation. We tested HANN in reactor system.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1736-1739
• /
• 2002

The advanced in semiconductor, hardware, and software technologies enables the integration of more com- plex systems and the increasing design complexity. As system design complexity becomes more complicated, System-level design based on the If block and processor model is more needed in most of the RTL level or low level. In this paper, we present a novel approach fur the system-level design, which satisfies the various required constraints and an optimization method of image encoder based on codesign of function, algorithm, and architecture. In addition, we show an MPEG-4 encoder as a design case study. The best tradeoffs between algorithm and architecture are necessary to deliver the design with satisfying performance and area constraints. The evaluations provide the effective optimization of motion estimation, which is in charge of an amount of performance in the MPEG-4 encoder module.

• 전력전자학회논문지
• /
• 제25권2호
• /
• pp.127-132
• /
• 2020

In this study, single-phase and three-level boost converters applied to the photovoltaic system were compared and analyzed in terms of efficiency and power density according to the input voltage and load conditions. For accurate analysis of efficiency, the losses in each device of the single-phase and three-level boost converters were derived using mathematical equations and simulations by using the PSIM thermal module. Then, the losses were compared with the efficiency confirmed through the actual experiments. Results confirmed that the efficiency and power density can be improved by applying the three-level boost converter to the system according to the selection of the switching frequency.

• 한국정보통신학회논문지
• /
• 제11권12호
• /
• pp.2280-2286
• /
• 2007

정보시스템은 다양한 구성요소들을 포함하고 있으며, 이들 구성요소들은 몇 개의 유형으로 구분될 수 있다. 보안수준관리활동을 준비 할 때, 관리활동의 대상을 정의하는 것이 가장 중요하며, 이들 대상을 정의한 이후 보안수준 관리활동이 시작될 수 있다. 본 논문에서는 정보시스템을 몇 개의 부분으로 나눔으로써 관리대상을 정의하고, 이들 대상은 운영 환경과 특성에 따라 다양하게 관리될 수 있음을 보여준다.

• 품질경영학회지
• /
• 제41권3호
• /
• pp.395-404
• /
• 2013

Purpose: Technology readiness assessment(TRA) used as a standard readiness assessment tool in the acquisition program of weapon system has some limitations in the comprehensive understanding of the complex system. Therefore, this research is intended to suggest a holistic maturity assessment method for the acquisition of high quality weapon system. Methods: Technology readiness level(TRL), manufacturing readiness level(MRL), integration readiness level(IRL) and system readiness level(SRL) developed to assess system maturities in the various aspects are compared and analyzed to draw an improvement avenue for the current readiness assessment method. Results: TRL, MRL, IRL and SRL have large differences in their maturity targets during the acquisition life cycle: technological performance, manufacturing capability, interface between components and total system, respectively. They complement one another's shortcomings Conclusion: To achieve a successful acquisition of high quality weapon system, multi-dimensional readiness assessment is required. Therefore, comprehensive readiness assessment using TRL, MRL, IRL and SRL will contribute to the acquisition of high quality weapon system through the accurate maturity information of overall system.

• 한국화재소방학회논문지
• /
• 제23권3호
• /
• pp.23-30
• /
• 2009

건물의 소방설비시스템의 유지 관리 상태에 이상이 나타났다고 한다면, 특정 기능의 이상이 미치는 부분적 또는 전체적인 화재안전대응수준에 영향을 미친다. 따라서 효율적 소방성능을 유지하기 위해 설비기능의 가동상태를 나타 낼 수 있는 성능지수의 계산 체계가 필요하다. 이러한 성능지수의 체계는 정보수신자가 부분 이상으로 발생한 영향이 전체 기능의 상태에 얼마나 영향을 주는 것인지를 쉽게 인지할 수 있도록 하는 데에 기여할 수 있다. 따라서 건물의 화재안전수준을 나타내는 효율지표로 사용될 수 있을 뿐만 아니라, 광대역규모의 소방 관리에서도 활용성 높은 지수로 사용될 수 있다. 본 지수 산정체계는 U-건물 소방방화시설관리 운용시스템의 성능 효율지수 산정을 위한 시스템으로 개발되었다.