• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.51 no.2
• /
• pp.59-68
• /
• 2002

This Paper presents the dynmics modeling and the operation simulation of the 500 MW drum-type boiler and its control system hosted in the Boryung Power Plant unit #1 and #2. The fidelity of the modeling and the operation simulation is well verified by their agreement with the actual data obtained form the plant operation. As a plant signal generator for the various operation patterns and fault situations, the simulation environment will be utilized to develope the fault detecting signal processing algorithms.

• Journal of Korean Port Research
• /
• v.2 no.1
• /
• pp.75-106
• /
• 1988

As port transport system consists of subsystems such as navigation system, cargo handling system, storage system, inland transport system, and Management and Information system, the productivity of this system is determined by the minimum level of subsystem. From the viewpoint of elaborating the efficiency of integrated system, it is valuable to determine the optimal level of harbour tug boat which is the most important factor of navigation system. This paper treats the optimal amount of harbour tug boat by simulation, and applied to Pusan port. In the course of simulation, an emperical formula is introduced for determining the Horse Power (HP) of tug boat by the ship's gross tonnage (G/T) refering to the cases of various ports of other countries, that is ; $Y=9.96X^{0.6}+569$. X : The gross tonnage of vessel (G/T). Y : The Horse Power (HP) of tug boat. The results of the simulation are summarized as follows ; 1) In 1987, three or four low-powered harbour tug boats, five mid-powered harbour tug boats and four high-powered harbour tug boats are necessary in the mean level. But, five or seven low-powered harbour tug boats, ten mid-powered harbour tug boats and eight high-powered harbour tug boats are necessary lest delay should occur at all. 2) In 1992, 1lee or four low-powered harbour tug boats, six mid-powered harbour tug boats and seven high-powered harbour tug boats are estimated and be necessary in the mean level.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.9
• /
• pp.146-155
• /
• 1994

In this paper, we desribe a new system, called BEST, that is used to develop a macromodel or behavioral model easily. It automatically calculates the component values of macromodel represented by equations to satisfy the given specification. Also, it gives the way to analyze both the behavioral model and transistor level circuit, and then compare the analysis results of them to check the correspondence under specific temperature and bias condition, and BEST optimizes the component values of macromodel. Other feature is to characterize MOSFET as switch model which consists of PWL-RC network. Finally, it is possible to generage multi-level netlist which consists of macro/switch/transistor level circuits, and user can determine the trade-off between simulation speed and accuracy. With the graphic user interface form of macromodel development system described above. BEST enable designers to make macromodel by themselves and to uas it. We applied BEST to develop the macromodel for the test circuit and got the 18.6 times simulation speed up with preserving the accuracy within 10% compared to the conventional transistor level circuit simulation. Also, applicability of optimization capability was verified.

• Nuclear Engineering and Technology
• /
• v.48 no.1
• /
• pp.98-113
• /
• 2016

A reactor vessel level monitoring system measures the water level in a reactor during normal operation and abnormal conditions. A drop in the water level can expose nuclear fuel, which may lead to fuel meltdown and radiation spread in accident conditions. A level monitoring system mainly consists of a sensing line and pressure transmitter. Over a period of time boron sediments or other impurities can clog the line which may degrade the accuracy of the monitoring system. The aim of this study is to determine blockage in a sensing line using the energy of the composite signal. An equivalent Pi circuit model is used to simulate blockages in the sensing line and the system's response is examined under different blockage levels. Composite signals obtained from the model and plant's unblocked and blocked channels are decomposed into six levels of details and approximations using a wavelet filter bank. The percentage of energy is calculated at each level for approximations. It is observed that the percentage of energy reduces as the blockage level in the sensing line increases. The results of the model and operational data are well correlated. Thus, in our opinion variation in the energy levels of approximations can be used as an index to determine the presence and degree of blockage in a sensing line.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.4
• /
• pp.131-140
• /
• 2013

This paper deals with the design and implementation of an interface for interoperation between DiskSim, a well-known disk simulator, and a system-level simulator based on DEVSim++. Such inter-operational simulation aims at evaluation of an overall performance of storage systems which consist of multiple computer nodes with a variety of I/O level specifications. A well-known system-level simulation framework, DEVSim++ environment is based on the DEVS formalism, which provides a sound semantics of modular and hierarchical modeling methodology at the discrete event systems level such as multi-node computer systems. For maintainability we assume that there is no change of the source codes for two heterogeneous simulation engines. Thus, we adopt a notion of simulators interoperation in which there should be a means to synchronize simulation times as well as to exchange messages between simulators. As an interface for such interoperation DiskSimManager is designed and implemented. Various experiments, comparing the results of the standalone DiskSim simulation and the interoperation simulation using the proposed interface of DiskSimManager, proved that DiskSimManager works correctly as an interface for interoperation between DEVSim++ and DiskSim.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.44 no.2
• /
• pp.140-152
• /
• 2021

During the shift from gasoline vehicles to electric ones, auto parts manufacturing companies have realized the importance of improvement in the manufacturing process that does not require any layout changes nor extra investments, while maintaining their current production rate. Due to these reasons, for the auto part manufacturing company, I-company, this study has developed the simulation model of the PUSH system to conduct a process analysis in terms of production rate, WIP level, and logistics work's utilization rate. In addition, this study compares the PUSH system with other three manufacturing systems -KANBAN, DBR, and CONWIP- to compare the performance of these production systems, while satisfying the company's target production rate. With respect to lead-time, the simulation results show that the improvement of 77.90% for the KANBAN system, 40.39% for the CONWIP system, and 69.81% for the DBR system compared to the PUSH system. In addition, with respect to WIP level, the experimental results demonstrate that the improvement of 77.91% for the KANBAN system, 40.41% for the CONWIP system, and 69.82% for the DBR system compared to the PUSH system. Since the KANBAN system has the largest impacts on the reduction of the lead-time and WIP level compared to other production systems, this study recommends the KANBAN system as the proper manufacturing system of the target company. This study also shows that the proper size of moving units is four and the priority allocation of bottleneck process methods improves the target company's WIP and lead-time. Based on the results of this study, the adoption of the KANBAN system will significantly improve the production process of the target company in terms of lead-time and WIP level.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.3
• /
• pp.343-348
• /
• 2014

Recently, applications of VSC-HVDC systems to power systems are growing because of their control ability of reactive power. Meanwhile, the hardware-in-the-loop simulation (HILS) based on the real-time digital simulator has been applying to develop and test imbedded controllers and systems in the power industry to decrease costs and to save time. In this paper, a 3-level neutral point clamped (NPC) VSC-HVDC system is modeled and the embedded controllers of the NPC VSC-HVDC system are designed. The designed controllers are implemented by TMS320F28335. The TMS320F28335-based controllers of the NPC VSC-HVDC system are tested using the HILS.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.1
• /
• pp.124-131
• /
• 2012

This paper presents a spreadsheet-based reliability prediction simulation framework for the conceptual product design stage to acquire system reliability information in timely manner. During early stage, reliability performance deals with both known and unknown failure rates and component-level and subsystem-level failure estimate to predict system reliability. A technique for performing life testing simulation using Excel spreadsheet has been developed under the such circumstances. This paper also discuss the results obtainable from this method such as reliability estimate, mean and variance of failures and confidence intervals. The resultant of this reliability prediction system is mainly benefitting small and medium-sized enterprise's field engineers.

• Journal of the Korea Society for Simulation
• /
• v.11 no.2
• /
• pp.77-88
• /
• 2002

Petri nets is a widely used formalism for specification and analysis of concurrent systems which is a subclass of discrete event systems. The DEVS (Discrete Event System Specification) formalism provides a general framework for specification of discrete event systems in a hierarchical, modular form. Often, modeling a discrete event system may employ both Petri Nets and DEVS formalism. In such a case low-level operational logics are modeled by Petri Nets and high-level managements by the DEVS formalism. Analysis of the system requires simulation of the overall system. This paper presents an algorithm for transformation of Petri Nets to DEVS formalism. The transformation enables modelers to simulate an overall system, which consists of DEVS models and Petri Nets models, in a unified DEVS simulation environment such as DEVSim++. An example for such transformation will be given.

• Journal of the Korea Society for Simulation
• /
• v.22 no.2
• /
• pp.73-83
• /
• 2013

This paper presents design and implementation of the monitoring system for the distributed simulation of underwater warfare. As importance of defense modeling and simulation(M&S) has raised, Simulation-Based Acquisition(SBA) was authorized for an obligatory process in the development process of weapon systems. Yet, it requires tremendous resources to develop a large-scale simulation system that describes complex and broad battlefields. Therefore, an approach of the distributed system was devised to develop a new simulation system combining legacy simulators that were developed for confined purpose and sole operations. High-Level Architecture(HLA) of distributed systems is a standardized protocol by IEEE for the distributed simulation system and Run-Time Infrastructure(RTI) is an implementation of HLA to structure efficient distributed systems. The main objective of this paper is to derive appropriate monitoring factors for underwater warfare simulation, design and implementation of the monitoring system to analyze the factors based on HLA/RTI.