• Journal of Aerospace System Engineering
• /
• v.8 no.3
• /
• pp.47-54
• /
• 2014

This is a research on the method of how to improve stall characteristics for the small general aviation airplanes to meet the FAR part 23 requirements. This research is based on the experience of certification flight tests of KC-100 airplane for Korea type certification. KAS/FAR Part 23.201/203 are the stall characteristics requirements. 23.201 requires to show the stable stalling tendency of the wings level stall and 23.203 requires to show the stable stalling tendency of stall characteristics during turning flight. In this paper, the stall characteristics requirements, improvement methods and flight test experience of KC-100 airplane for type certification.

• Journal of the Korean Society of Costume
• /
• v.64 no.7
• /
• pp.156-171
• /
• 2014

This study attempted to comprehend the usage of the modular system in fields through literature review and objective research, as well as analysis of its expression characteristics in fashion. It tried to provide inspiring visual data for the fashion design of the modular system. After analyzing architecture and product-related books, Internet data and advanced research, the four expression characteristics of the modular system were obtained. Firstly, the formative expression characteristics of the modular system in fashion were simplicity, extensibility, variability and diversity. Secondly, of the formative expression characteristics expressed in modern fashion, simplicity (30%) was the highest, followed by extensibility (27%), diversity (22%) and variability (21%). Thirdly, simple silhouette and structure were used to express simplicity, usually simple geometric figures. In contrast, extensibility was expressed through the expansion and exaggeration of the area, length and volume of the clothes. In terms of variability, the typical characteristics of modules were reflected. For diversity, heterogeneous materials were used, and informality was expressed.

• Journal of the Korean Society of Visualization
• /
• v.16 no.2
• /
• pp.7-15
• /
• 2018

The fluid-flow characteristics of flue-gas-recirculation (FGR) system can have a significant effect on system efficiency of a sintering plant. The flow characteristics in the system were investigated. A sintering plant with FGR system was modeled. Numerical visualization was performed and flow characteristics were analyzed. Characteristics of the flow distribution of the branch ducts, the inflow of air into the recirculating hood, and the flow in the hood were discussed. Based on the results three suggestions were proposed: (1) distribution of branch duct flowrate upstream, (2) installation of external air ducts in the hood, and (3) installation of baffles at the hood corners. The suggestions were tested numerical and experimental visualization methods. The suggestions were effective and confirmed to be applicable to the actual sinter plant.

• Journal of Power Electronics
• /
• v.19 no.1
• /
• pp.211-219
• /
• 2019

In magnetically coupled resonant (MCR) wireless power transfer (WPT) systems, the introduction of additional intermediate coils is an effective means of improving transmission characteristics, including output power and transmission efficiency, when the transmission distance is increased. However, the position of intermediate coils in practice influences system performance significantly. In this research, a three-coil MCR WPT system is adopted as an exemplification for determining how the spatial position of coils affects transmission characteristics. With use of the fundamental harmonic analysis method, an equivalent circuit model of the system is built to reveal the relationship between the output power, the transmission efficiency, and the spatial scales, including the axial, lateral, and angular misalignments of the intermediate and receiving coils. Three cases of transmission characteristics versus different spatial scales are evaluated. Results indicate that the system can achieve relatively stable transmission characteristics with deliberate adjustments in the position of the intermediate and receiving coils. A prototype of the three-coil MCR WPT system is built and analyzed, and the experimental results are consistent with those of the theoretical analysis.

• Korean Institute of Interior Design Journal
• /
• v.14 no.5 s.52
• /
• pp.44-51
• /
• 2005

This study focuses 'Korean characteristics' in architectural interior design. In this study, some Korean characteristics was extracted by analysing traditional Korean spaces and as well as by considering the architectural interior spaces which are designed with Korean character since 1970. This paper started with differenciating the elements and principles that consist of space, and then classified the elements into 8 categories such as Spatial system, Enclosure system, Circulation system, Material system, Furnishing system, Light, Color, Context which are analysing frames. As a conclusion, the concepts of Korean characteristics are extracted and suggested as design concept with Korean characteristics by analysing the contents of each category. These concepts were presented with simple diagrams and supporting cases were also presented in this paper. The design concepts of 'Korean characteristics' are classified in the 25 concepts: Holonic composition, Transitional space, Hierarchy by floor level, Gradation of privacy, Changeability, Various central yards, Space with opened edges, Gray space, Continuity of space, Translucent wall, Folding-lifting wall, Skeleton, Abstract facet, Path as a message, Mild light, Multii-layered vista, Fluidity, framed scenery, Serial view, Interpenetrating Space, Harmony with nature, Organic interrelationship, Complementary Dual Structure, Temporal change of space, Hierarchical order.

• Progress in Superconductivity and Cryogenics
• /
• v.17 no.1
• /
• pp.32-35
• /
• 2015

Many kinds of high temperature superconducting (HTS) devices are being developed due to its several advantages. In particular, the advantages of HTS devices are maximized under the DC condition. A line commutated converter (LCC) type high voltage direct current (HVDC) transmission system requires large capacity of DC reactors to protect the converters from faults. However, conventional DC reactor made of copper causes a lot of electrical losses. Thus, it is being attempted to apply the HTS DC reactor to an HVDC transmission system. The authors have developed a 8 mH class HTS DC reactor and a model-sized LCC type HVDC system. The HTS DC reactor was operated to analyze its operational characteristics in connection with the HVDC system. The voltage at both ends of the HTS DC reactor was measured to investigate the stability of the reactor. The voltages and currents at the AC and DC side of the system were measured to confirm the influence of the HTS DC reactor on the system. Two 5 mH copper DC reactors were connected to the HVDC system and investigated to compare the operational characteristics. In this paper, the operational characteristics of the HVDC system with the HTS DC reactor according to firing angle are described. The voltage and current characteristics of the system according to the types of DC reactors and harmonic characteristics are analyzed. Through the results, the applicability of an HTS DC reactor in an HVDC system is confirmed.

• The Korean Journal of Community Living Science
• /
• v.24 no.3
• /
• pp.391-397
• /
• 2013

This study was conducted to define the characteristics of the fan according to the bed depth of rough rice for the silo used in South Korea. In this study, the characteristics like air flow resistance and air flow rate of the fan were investigated for an independent blowing system with 1 fan and the serial blowing system with 2 fans. In the experiment, the depth of rough rice was determined by 0, 1, 2, 3.2 and 4.5 m for an independent blowing system and the depth of rough rice was 4.5 m for the serial blowing system. The air flow resistances of the blowing fan and the suction fan in an independent blowing system were 55 mmAq and 88 mmAq respectively. In addition, the air flow resistance of the serial blowing system was 61% lower than the blowing fan and 28% lower than the suction fan of the independent blowing system. The air flow rates of the blowing fan and the suction fan in the serial blowing system were 516 $m^3/min$, 570 $m^3/min$, respectively. The former was 22% higher than the blowing fan while the latter was 29% higher than the suction fan in the independence blowing system. In other words, the serial blowing system was superior to the independent blowing system in blowing characteristics because the air flow rate was lower and air flow resistance was higher than the independent blowing system. However, the fan power consumption of the serial blowing system was more than 100% comparing with the independent blowing system.

• Korean Institute of Interior Design Journal
• /
• v.15 no.2 s.55
• /
• pp.166-173
• /
• 2006

Architectural color has been preserved the multiple characteristics reflected the change of social value criteria and technical development. Especially, the change of technical paradigm has led to variation from simple and fixed color system, as through the considerable change of architect's subject thinking, favored and symbolic system. Now, architectural color has also been revealed as the timely, moving, behavioral and existent color by anthropolatric thinking system. Therefore, it could be transformed expressive system reflected from abstract-pictorial characteristics, from the fixed to non-determining system, constructive to non-constructive system, context to expressive system, reasonal to emotional system, respectively. So, the range of architectural color has been extended as a element in reinforced the planned concept of the architect beyond the past decorated and symbolic color scope. As thereinafter, future's architectural color could be expected to concrete to the public-friendly relation system, developed widely to the system for reinforcing the concept not introduction of meaningless, fragmental and instinct color through the relational adaptation with design concept.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.6
• /
• pp.491-496
• /
• 2005

In this paper, test on characteristics of 3-phase line-interactive UPS system, known as delta conversion UPS system, is studied. Delta conversion UPS system is new line-interactive UPS system using two series-parallel PWM converters instead of using series inductor in conventional single conversion line-interactive UPS system. It is known that the characteristics of input and output in delta conversion UPS system is much improved by controlling source current of AC lines directly. Here the results on load test, normal/backup mode test, and normal/bypass mode test, which are very important in the test on characteristics of UPS system, is presented. And finally overall evaluation on delta conversion UPS system is given.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.6
• /
• pp.852-858
• /
• 2010

Recently, the high-tech industries, such as aerospace industry, auto industry, and electronics industry, are growing up considerably. Because of that, high machining accuracy and productivity of precision parts have been required. The tooling system is important part in the machining center. HSK tooling system is more suitable than BT tooling system for that of high speed machining center. It is because static stiffness and machining accuracy of HSK tooling system are higher than those of BT tooling system. In this paper, stress distribution characteristics of the HSK tooling System is analyzed according to the spindle speed. In order that, the mechanism and the force amplification principle of HSK tooling system are analyzed. The HSK tooling system is modelled by using a 3D modeling/design program. Then stress distribution characteristics of HSK tooling system are analyzed according to spindle speed by using the finite element analysis.