• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.703-704
• /
• 2013

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.527-530
• /
• 1997

An automated process planning system for cold forging of non-axisymmetric parts of comparatively simple shape was developed in this study. Programs for the system have been written with Visual LISP in the AutoCAD using a personal computer and are composed of four main modules such as input module, shape cognition and shape expression module, material diameter determination module and process planning module. The design rules and knowledges for th system are extracted from the plasticity theories. handbook, relevant reference and empirical knowledge of field experts. Generally, in forging, only front view is needed for expression of axisymmetric parts, but non-axisymmetric parts are needed both front view and plane. At the plane, this system cognizes the external shape of non-axisymmetric parts - number of sides of regular polygon and radius of a circle circumscribing the polygon of n sides. At the front view, the system perceives diameter of axisymmetric portions and hight of primitive geometries such as polygon, cylinder, cone, concave, convex, etc.

• 정보처리학회논문지D
• /
• 제16D권3호
• /
• pp.381-394
• /
• 2009

소프트웨어 모델링 과정에서 생성되는 산출물들에 대한 모델의 재사용성을 향상시키기 위한 기법으로, MDA 모델 기반의 개발방법이 적용되고 있다. 아직도, UML을 이용한 MDA 기반의 개발에 대한 계층적이고 체계적인 기법은 미약한 상태이다. 이로 인해, MDA 메타모델에 기반한 일관성 있고 재사용성이 높은 MDA 모델링이 제대로 실현되지 못하고 있다. 본 논문은 이를 해결하기 위해, 2+1 View 통합 메타모델을 통한 MDA(PIM/PSM) 컴포넌트 모델링 기법을 제시한다. 먼저, 개발 프로세스 view와 MVC View를 표현할 수 있는 meta-architecture view 모델을 정의한다. 정의된 meta-architecture view 계층의 메타 레벨에서, 개발 프로세스 view와 MVC view별로 MDA 기반의 계층적 통합 메타 모델이 제시된다. 이 메타모델은 UML 모델과 GUI 모델이 갖는 모델링 요소들을 PIM과 PSM에 의해 계층적으로 표현한다. 제시한 메타모델을 ISMS 시스템에 적용하여 MDA 기반의 컴포넌트 모델링 사례를 제시한다. 이를 통해, 개발단계별 및 MVC 방식에 의해 일관성 있고 계층적인 MDA 컴포넌트 모델을 구축할 수 있다. 따라서, 모델에 대한 독립성과 재사용성의 향상을 기대할 수 있다.

• 조명전기설비학회논문지
• /
• 제27권10호
• /
• pp.9-14
• /
• 2013

The monitoring system is an absolutely required system for improving a performance to consider the situation for the hybrid generation of the photovoltaic (PV) and wind power (WP) energy experimental research complex. This system is to monitor with the railroad switching point heating system using LabVIEW to the hybrid generation of the PV and WP. The monitoring system of this paper is a program monitoring the hour, day and total of the voltage and current that made from the hybrid generation of PV and WP. In experiment, we acquired the power data according to time at the day of PV and WP. We have confirmed the possibility of the real time monitoring system using LabVIEW with the railroad switching point heating system as the hybrid generation of the PV and WP.

• ETRI Journal
• /
• 제38권6호
• /
• pp.1085-1094
• /
• 2016

In this work, we present interactive automultiscopic content with mobile surface haptics for multimodal interaction. Our system consists of a 40-view automultiscopic display and a tablet supporting surface haptics in an immersive room. Animated graphics are projected onto the walls of the room. The 40-view automultiscopic display is placed at the center of the front wall. The haptic tablet is installed at the mobile station to enable the user to interact with the tablet. The 40-view real-time rendering and multiplexing technology is applied by establishing virtual cameras in the convergence layout. Surface haptics rendering is synchronized with three-dimensional (3D) objects on the display for real-time haptic interaction. We conduct an experiment to evaluate user experiences of the proposed system. The results demonstrate that the system's multimodal interaction provides positive user experiences of immersion, control, user interface intuitiveness, and 3D effects.

• 공학교육연구
• /
• 제19권2호
• /
• pp.3-7
• /
• 2016

A flow control system was designed and fabricated to control the flow rate of liquid through the pipe. This control system was composed of hardwares and software, hardwares as controller, gate valve, orifice meter and data aquisition board and software as National instruments Labview program. Control of flow rate was executed by adjusting the pneumatic valve located at the center of pipe line based on the control signal generated by LabView PID control algorithm, which converts analog signal measured by pressure difference of orifice to digital signal to adjust pneumatic valve. For the controller setup Ziegler-Nichols tuning technique was applied and control performances were investigated for not only the disturbance but also the set point changes. Developed system showed good control performances in flow control enough to use as teaching tool of feedback control theory and practice in university, and also as industrial application.

• 한국정보통신학회논문지
• /
• 제16권1호
• /
• pp.160-166
• /
• 2012

PAPS(학생건강체력평가시스템, Physical Activity Promotion System)를 위한 반사형 맥박수 측정 장치를 개발 하고 성능평가를 수행하였다. 본 연구를 위해 제작된 센서 모듈은 저전력 구동을 위해 chip LED 및 photo TR.를 이용하여 맥파를 측정하였다. 측정된 맥파신호는 HPF, LPF와 OP Amp.를 이용하여 신호를 전처리하였으며, 전처리한 맥파신호는 LabVIEW로 디스플레이하였다. 또 LabVIEW는 원신호를 받아들여 유효신호를 추출하고, 맥박을 계산하기 위한 알고리즘을 포함한다. 이러한 시스템과 알고리즘을 이용하여 운동상태의 피실험자를 대상으로 높은 정확도와 반복성을 갖는 측정 기구로의 적용이 가능함을 확인하였다.

• 한국정보시스템학회지:정보시스템연구
• /
• 제15권2호
• /
• pp.95-123
• /
• 2006

It is needed to evaluate information systems actively which has already developed to improve future performance of the organization and foster the activation of information system. The introduction or development of information system also can bring about a organizational success. To measure exactly the organizational performance of information systems, it is needed to develop a new valuation model for a specific information system from a objective pint of view, as well as to equip a standard methodology using BSC measurement. The information system valuation from a objective point of view is of importance as the basic information for the decision to obtain information system. This paper takes aim at investigating a new information system valuation model and developing a information system valuation system using case-based reasoning for predicting currency value of information system in each organization. A new information system valuation system is developed as a web-enabling base. Using this, users are able to estimate the value of specific information system on a real time efficiently.

• 디지털콘텐츠학회 논문지
• /
• 제2권1호
• /
• pp.21-30
• /
• 2001

본 논문에서는 분산환경에서 MVC(Model View Controller) 모델을 기반으로 하는 Model 2 프레임 웍에 입각하여 소프트웨어 컴포넌트와 관련된 요소를 자동 생성하여 웹 애플리케이션 구축을 지원하는 방법에 대해 제시한다. Model 2 프레임웍은 웹 애플리케이션에서 Model, View, Controller를 이용하여 MVC 구조로 작성하는 방법으로 기능을 캡슐화하여 변경에 대해 영향을 최소로 하는 구조이기 때문에 확장성, 유지보수성 면에서 좋은 방법으론 인식되고 있다. Model 2 프레임웍 하에서 소프트웨어 컴포넌트와 관련된 요소를 자동 생성하기 위해 MVC 모델, 컴포넌트, Model 2 프레임웍, 디자인 패턴 등에 대해 살펴보고 구현 환경에 적용하기 위한 개선된 Model 2 프레임웍을 제시하고 제시된 프레임웍에 기반하여 소프트웨어 컴포넌트와 관련된 요소를 자동 생성하는 시스템을 설계하고 구현한다.

• 산업기술연구
• /
• 제19권
• /
• pp.279-285
• /
• 1999

An integrated sewer management system was developed for the analysis of sewer flow and for optimal operation of sewer works using ArcView and SWMM. SWMM and ArcView were dynamically linked together using Avenue in order to construct user-friendly management system. The developed system was applied to a residential area in Choonchun city to verify its utilities. All the relevant field data were analyzed on the basis of developed system, and the modeling of sewer flow was implemented using RUNOFF, EXTRAN, TRANSPORT in SWMM. This system is now in the process of connection to the management system of watershed and surface environment in order to develope an integrated environmental management system. Futhermore, this system will be a critical part of overall control system of sewer works including sewer line and wastewater treatment plant. As this system can provide comprehensive prediction of flow and pollution profiles, it could serve as a tool not only for optimal management, but also for decision support system to examine the efficiency of planning and implementation of sewer projects.