• Journal of Fisheries and Marine Sciences Education
• /
• v.13 no.1
• /
• pp.99-116
• /
• 2001

Testing is a procedure used to measure a sample of behaviour in order to discover how well a seafarer performs, usually in comparison with others, or compared with identified performance criteria. In this context It is important that the test, in whatever form it is being used, yields consistent results by being valid, reliable and practical. Whilst we can only take a sample of a person's knowledge or comprehension about topic in this way, testing methods do provide a more reliable estimate of performance than most other observational techniques; unsystematic or irregular observation being too unreliable. The method of examination has been specified in the provisions of Regulation 12 of the Decree of the ship officers act as followings. Other necessary matters for conducting oral and written examinations have been set out by the Minister. But written examination is too shortage of period and small number of question to cover the qualification of each level and oral test is just simple and namely Traditionally, written examinations have been provided as the only means for determining the acquisition of knowledge by the mariner. Typically, the examination formats have taken the format of either an essay or multiple choice examinations. Essay items, used in the vast majority of subject examination(not in Korea), consisted of three basic types: situational, descriptive and computational. The level of certificate being examined determined the number and mix of the type of essay questions selected. Oral question has again been used by assessors of seafarer in a wide variety of contexts. Also, oral questioning is often used when observation of performance is undertaken to ask why a certain action has been taken, or to be broaden the scope of what has been observed. At end, Each techniques have their own advantage and disadvantage, so we have to choose some or all of the following techniques, depending upon the certificate, qualification or job for which the trainee is aiming. But in high lank, we have to use both of essay type and multiple choice and with enough time of oral test at least 30 minutes. Who would be the assessor? According to the STCW Code Section A-I/6, instructors, supervisor and assessors are appropriately qualified for particular types and levels of training or assessment of competence of seafarers either on board or ashore, as required under the Convention, in accordance with the provisions of this section.

• Journal of Energy Engineering
• /
• v.23 no.3
• /
• pp.186-190
• /
• 2014

Nuclear Power Plants require the control ability of chemical condition (pH) because pH control during transient accident such as LOCA makes an able the fission product removal capability to be maintained, stress corrosion cracking of stainless steel equipment to be prevented and the production of hydrogen by aluminum and zinc to be minimized. An NPP is designed to control the pH of containment spray and sump coolant using the spray additives 30% NaOH in the event of loss of coolant accident. In this paper, the pH of sump coolant of an NPP during LOCA was analyzed and the fission products removal constant and decontamination factor were calculated according to Standard Review Plan 6.5.2 related to spray chemical conditions of pH. The calculated pH value of recirculation mode using the computer code corresponds to 8.09~9.67, which meets the chemical environment regulation requirements. The fission product removal capability caused by containment spray system is performed to provide input to radiation analysis.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.11
• /
• pp.32-40
• /
• 2016

IEEE 802.15.4 is the one of the protocols for radio communication in a personal area network. Because of low cost and low power communication for IoT communication, it requires the highest optimization level in the implementation. Recently, the studies of location aware algorithm based on IEEE802.15.4 standard has been achieved. Location estimation is performed basically in equal consideration of reference node information and blind node information. However, an error is not calculated in this algorithm despite the fact that the coordinates of the estimated location of the blind node include an error. In this paper, we enhanced a conventual maximum likelihood estimation using weighted coefficient and implement the hardwired location aware engine for small code size and low power consumption. On the field test using test-beds, the suggested hardware based location awareness method results better accuracy by 10 percents and reduces both calculation and memory access by 30 percents, which improves the systems power consumption.

• Journal of the Korea Concrete Institute
• /
• v.26 no.2
• /
• pp.143-150
• /
• 2014

To avoid abrupt torsional failure due to concrete crushing before yielding of torsional reinforcement and control the diagonal crack width, design codes specify the limitations on the yield strength of torsional reinforcement of RC members. In 2012, Korean Concrete Institute design code increased the allowable maximum yield strength of torsional reinforcement from 400 MPa to 500 MPa based on the analytical and experimental research results. Although there are many studies regarding the shear behavior of RC members with high strength stirrups, limited studies of the RC members regarding the yield strength of torsional reinforcement are available. In this study, twelve RC beams having different yield strength of torsional reinforcement and compressive strength of concrete were tested. The experimental test results indicated that the torsional failure modes of RC beams were influenced by the yield strength of torsional reinforcement and the compressive strength of concrete. The test beams with normal strength torsional reinforcement showed torsional tension failure, while the test beams with high strength torsional reinforcement greater than 480 MPa showed torsional compression failure. Therefore, additional analytical and experimental works on the RC members subjected to torsion, especially the beams with high strength torsional reinforcement, are needed to find an allowable maximum yield strength of torsional reinforcement.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.2
• /
• pp.147-153
• /
• 2009

In this paper, FSS(Frequency Selective Surface) using defect mode characteristic is proposed. The unit cell using defect mode characteristic of the proposed FSS is offered lower resonant frequency in the same cell size. The number of suitable array is optimized 13 by 13. Also, the patch antennas operated in WCDMA(Wideband Code Division Multiple Access) Tx band and Rx band are designed for the comparison. The gain value of proposed FSS-1 complex structure (the patch antenna of Tx band and FSS) is improved 3.3 dB from 9.98 dBi to 13.28 dBi in Tx band. The gain value of proposed FSS-2 complex structure(the patch antenna of Rx band and FSS) is improved 5.53 dB from 9.81 dBi to 15.34 dBi in Rx band. Also the measured impedance bandwidth($VSWR{\leq}2$) of manufactured $13{\times}13$ array antenna is from 337 MHz(1.87 to 2.21 GHz). The measured radiation gain is 11.39 dBi(1.94 GHz), 13.11 dBi(2.05 GHz), 11.09 dBi(2.14 GHz). The measured radiation efficiency is 81 %. Because the proposed FSS structure has more higher gain, it will be applied to antenna of WCDMA repeater system.

• 대한공업교육학회지
• /
• v.32 no.1
• /
• pp.93-116
• /
• 2007

The purpose of this study was to improve the academic achievement at the public practical center of technical high school in Busan. For this study, 1 class(31 students) in the second grade at "B"technical high school were selected and these students were divided into two groups. One is the experiment group which blended learning was applied to and the other is control group which traditional lecture method was applied to. Each group was divided into three sub-groups by the level of learning ability. Non-randomized control-group pretest-posttest design was applied for this experiment planning. The subject of experiment was the unit of "3D Modeling and Making NC code" in the textbook of "Application of Automatic System" applied by the public practical center of technical high school in Busan. On-line contents were developed and applied to the blended learning to control group. In order to analyze the test result, t-test with a significance level of 0.05 was carried out using SPSS 10.0. The results of this study was summarized as follows; First, as a result of the post test performed on the experiment and the control group, there was a significant difference between two groups, that was, the blended learning was more effective than the traditional lecture method in improving academic achievement. Second, blended learning was more effective than the traditional lecture method in the group of high-leveled and middle-leveled, but was little effective on the low-leveled group. Third, blended learning was more effective than the traditional lecture method in the functional domain, but was little effective in the cognitive domain and psychomotor domain.

• Journal of Korea Multimedia Society
• /
• v.7 no.9
• /
• pp.1282-1293
• /
• 2004

This paper proposes an asymmetric watermarking system using Public Key Infrastructure. The distinguishing characteristic of the proposed method connects between the two different techniques, cryptography technique and watermarking technique, by using the authentication technique. The connection between the two techniques are established based on the special qualities of each technique. Watermarks that are inserted into the digital contents consist of a digital signature described as an encrypted copyright information with the private key of a distributor or a copyright holder, and an authentication code. In the situation where the ownership of the digital contents has to be decided, authentication technique examines the data integrity of the digital contents based on an authentication and decides the ownership of the digital contents by examining whether it satisfies or not satisfies the integrity test. The formal case uses decryption method which compares the user defined copyright information, and the decrypted copyright information extracted from the watermark in the digital contents that are decrypted by distributors' public key The latter case determines the ownership by comparing the similarity between encrypted copyright information separated from the watermark that are extracted from the digital contents, and the user defined encrypted copyright information that are separated from the watermark The proposed method provides protection from the assault which attempts to identify or erase the encoding key.

• Journal of Advanced Navigation Technology
• /
• v.17 no.1
• /
• pp.69-79
• /
• 2013

In this paper, DCT(Discrete Cosine Transform) and CAVLC(Context Adaptive Variable Length Coding) are co-designed as hardware IP with software operation of the other modules in H.264/AVC codec. In order to increase the operation speed, a new method using SHIFT table is proposed. As a result, enhancement of about 16(%) in the operation speed is obtained. Designed Hardware IPs are downloaded into Virtex-4 FX60 FPGA in the ML-410 development board and H.264/AVC encoding is performed with Microblaze CPU implemented in FPGA. Software modules are developed from JM13.2 to make C code. In order to verify the designed Hardware IPs, Modelsim program is used for functional simulation. As a result that all Hardware IPs and software modules are downloaded into the FPGA, improvement of processing speed about multiples of 16 in case of DCT hardware IP and multiples of 10 in case of CAVLC compared with software-only processing. Although this paper deals with co-design of H/W and S/W for H.264, it can be utilized for the other embedded system design.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.21-31
• /
• 2018

This paper presents an experimental investigation on the structural performance of precast ribbed panel specimens and bridge deck specimens fabricated from the panels. The panel specimens are developed for permanent deck forms of railway bridges (PSC girder). The decks of railway bridges have short lengths compared with highway bridges. Therefore, precast panels for railway bridges are different from those of highway bridges. The precast panels have ribs designed for crack control at the bottom of the sections. Two kinds of specimens were examined: one with 400-mm width and one with 1200-mm width. Three specimens of each type were fabricated, and a total of 12 specimens were tested. In this test, the ultimate load, strain of the reinforcement and concrete, crack width, deformation, and slip were measured. The structural performance of the specimens was assessed using the Korea railway bridge design code and Eurocode. All specimens met the current design criteria for structural strength and serviceability.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.12
• /
• pp.746-755
• /
• 2014

Compressive sensing (CS) has drawn much interest as a new sampling technique that enables signals to be sampled at a much lower than the Nyquist rate. By noting that the block-based compressive sensing can still keep spatial correlation in measurement domain, in this paper, we propose a novel encoding technique for measurement data obtained in the block-based CS of natural image. We apply discrete wavelet transform (DWT) to decorrelate CS measurements and then assign a proper quantization scheme to those DWT coefficients. Thus, redundancy of CS measurements and bitrate of system are reduced remarkably. Experimental results show improvements in rate-distortion performance by the proposed method against two existing methods of scalar quantization (SQ) and differential pulse-code modulation (DPCM). In the best case, the proposed method gains up to 4 dB, 0.9 dB, and 2.5 dB compared with the Block-based CS-Smoothed Projected Landweber plus SQ, Block-based CS-Smoothed Projected Landweber plus DPCM, and Multihypothesis Block-based CS-Smoothed Projected Landweber plus DPCM, respectively.