• Restorative Dentistry and Endodontics
• /
• 제23권1호
• /
• pp.366-378
• /
• 1998

Thermocondensation root canal filling technique have been used to fill accessary canals or to obtain homogeneous root caral fillings. But these thermocondensation technique inevitably produce heat in the canal which can be transmitted through the dentin and cementum and consequently damage periodontal ligamental cells and osteoblasts. In this study, System $B^{TM}$(Analytic technology, WA.D.S.A.) was used to evaluate the reaction of periodontal ligament tissue to "Continous Wave condensation technique" introduced by Buchanan, and the transmitted root surface temperature was measured according to measured root thicknesses. 12 Mandibular incisors of two adult dogs were used for the experiment. 6 controls were filled by lateral condensation technique with sealer.3 specimens were apically filled by Continuous Wave technique at $200^{\circ}C$ for 5 seconds and remaining 3 specimens were additionally backfilled using System $B^{TM}$(Analytic technology, WA.D.S.A.) was used to evaluate the reaction of periodontal ligament tissue to "Continous Wave condensation technique" introduced by Buchanan, and the transmitted root surface temperature was measured according to measured root thicknesses. 12 Mandibular incisors of two adult dogs were used for the experiment. 6 controls were filled by lateral condensation technique with sealer.3 specimens were apically filled by Continuous Wave technique at $200^{\circ}C$ for 5 seconds and remaining 3 specimens were additionally backfilled using System $B^{TM}$ at $100^{\circ}C$ for 20 seconds. Six weeks later, the dogs were sacrificed and the teeth stained with Hematoxylin and Eosin for histologic examination. 6 extracted human teeth were used to measure the transmitted temperature. After cutting off the crown, the canals were prepared and divided into 3 groups with root thickness of 1.5mm, 1.0mm, 0.5mm, 2 teeth in each group. Inside each root canal, System $B^{TM}$ was heated as with the temperature for the apically condensed and the back filled group, and the transmitted heat was measured on the external surface of the root. The temperature of System $B^{TM}$ heat spreader at $200^{\circ}C$ and $100^{\circ}C$ was also measured at root temperature. It can be concluded as follows: 1. In the thin area (200-$250{\mu}m$) of the root, root resorption could be seen even with heating at $200^{\circ}C$ for 5 seconds. 2. When the spreader was heated at $200^{\circ}C$ for 5 seconds and additionally at $100^{\circ}C$ for 20 seconds for backfill, all teeth showed root resorption regardless of their root thickness. 3. The transmitted external root surface temperature was higher as the root thickness decreased and as the heating time increased. In the thermocompaction technique using System $B^{TM}$, the spreader should be heated for the minimal time and used only in the apical area. The heated spreader shouldn't inserted to the binding point of the canal and backfilling should be done with other means of minimally heated gutta percha technique.

• 대한치과보철학회지
• /
• 제45권2호
• /
• pp.216-227
• /
• 2007

Statement of problem: For the long-term success of removable partial dentures, the bonding between metal framework and denture base resin is one of the important factors. To improve bonding between those, macro-mechanical retentive form that is included metal framework design has been generally used. However it has been known that sealing at the interface between metal framework and denture base resin is very weak, because this method uses mechanical bonding. Purpose: Many studies has been made to find a simple method which induces chemical bond, now various bonding system is applied to clinic. In this experiment, shear bond strengths of heat-cured denture base resin to the surface-treated Co-Cr alloy were measured before and after thermocycling. Chemically treated groups with Alloy $Primer^{TM}$, Super-Bond $C&B^{TM}$, and tribochemically treated group with $Rocatec^{TM}$ system were compared to the beadtreated control group. The data were analyzed with two-way ANOVA. Result: 1. Shear bond strength of bead-treated group is highest, and Alloy $Primer^{TM}$ treated group, Super-Bond $C&B^{TM}$ treated group, RocatecTM system treated group were followed. Statistically significant differences were found in each treated group(p<0.05). 2. Surface treatment and thermocycling affected shear bond strength(p<0.05), however there was no interaction between two factors(p>0.05). 3. Shear bond strengths of bead-treated group and Alloy $Primer^{TM}$ treated group showed no statistically significant difference before and after thermocycling(p>0.05), and those of Super-Bond $C&B^{TM}$ treated group and $Rocatec^{TM}$ system treated group showed statistically significant difference after thermocycling(p<0.05).

• 한국전산구조공학회논문집
• /
• 제29권3호
• /
• pp.245-252
• /
• 2016

상부 탑재형 노내계측기(TM-ICI) 개발은 원자로하부헤드 대신 원자로상부헤드로 계측기를 삽입함으로써 중대사고 위험을 줄이기 위해 진행 중이다. 이 개발 과제의 일환으로, NUREG/CR-6909와 Code Case N-761의 두 방법에 따라 TM-ICI 노즐에 대한 환경피로평가가 수행되었다. TM-ICI 노즐은 level A, level B 및 시험 조건에서의 과도조건에 따른 하중을 받는데 이에 대해 피로평가를 해야 한다. 원자로냉각재환경이 고려된 TM-ICI 노즐의 누적사용계수는 1이하로 평가되었고, 이는 ASME Code 허용기준을 만족한다.

• 대한전자공학회논문지TE
• /
• 제42권4호
• /
• pp.69-76
• /
• 2005

본 논문에서는 삼중모드 공동 공진기를 이용하여 위성 탑재용 2단 6-pole 대역통과 필터를 설계 제작하였다. 대역통과 필터는 중심 주파수 14.5GHz(Ku-band)에서 대역폭 100MHz로 설계하였으며 응답은 Chebyshev 함수를 이용하였다. 공동 공진기의 공진모드는 TE113과 TM012 모드를 이용하였다. 공동 공진기간의 결합(intercavity coupling)은 Chebyshev 필터 응답을 구현하기 위하여 TE113 모드의 자계 성분만을 결합하였다. 따라서 원통형 공동 공진기내의 TE모드와 TM모드에 대한 E-,H-field 기본식으로부터 결합계수 수식을 유도하여 이를 intercavity 슬롯의 위치와 크기를 결정하는데 이용하였다. 설계 제작된 2단 6-pole 삼중모드 공동 공진기 대역통과 필터의 통과 대역폭에의 평균 삽입손실은 2.4dB이며 통과 대역의 반사손실 S11은 평균 15dB 이상으로 측정되었다. 본 논문에서 제작된 삼중모드 필터는 위성 탑재 장치내에 채널 필터 및 일반 시스템의 필터 어셈블리를 소형화시키는데 적용가능할 것으로 판단된다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.1273-1278
• /
• 2005

본 논문에서는 공동 공진기를 이용하여 위성 탑재용 2 단 6-pole 대역통과 필터를 설계 제작하였다. 대역통과 필터는 중심 주파수 14.5GHz(Ku-band)에서 대역폭 100MHz로 설계하였으며 응답은 Chebyshev 함수를 이용하였다. 공동 공진기의 공진모드는 TE113 과 TM012 모드를 이용하였다. 공동 공진기간의 결합(intercavity coupling)은 Chebyshev 필터 응답을 구현하기 위하여 TE113 모드의 자계 성분만을 결합하였다. 따라서 원통형 공동 공진기내의 TE모드와 TM모드에 대한 E-,H-field 기본식으로부터 결합계수 수식을 유도하여 이를 intercavity 슬롯의 위치와 크기를 결정하는데 이용하였다. 설계 제작된 2단 6-pole 삼중모드 공동 공진기 대역통과 필터의 통과 대역폭내의 평균 삽입손질은 2.4dB이며 통과 대역의 반사손실 S11은 평균 15dB 이상으로 측정되었다. 본 논문에서 제작된 삼중모드 필터는 위성 탑재 장치내에 채널 필터 및 일반 시스템의 필터 어셈블리를 소형화시키는데 적용가능 할 것으로 판단된다.

• International Journal of Computer Science & Network Security
• /
• 제21권1호
• /
• pp.84-96
• /
• 2021

Certainly, the success of the Unified Modeling Language (UML) as the de facto standard for modeling software systems does not imply closing the door on scientific exploration or experimentation with modeling in the field. Continuing studies in this area can produce theoretical results that strengthen UML as the leading modeling language. Recently, a new modeling technique has been proposed called thinging machine (TM) modeling. This paper utilizes TM to further understand UML, with two objectives: (a) Fine issues in UML are studied, including theoretical notions such as events, objects, actions, activities, etc. Specifically, TM can be used to solve problems related to internal cross-diagram integration. (b) TM applies a different method of conceptualization, including building a model on one-category ontology in contrast to the object-oriented paradigm. The long-term objective of this study is to explore the possibility of TM complementing certain aspects in the UML methodology to develop and design software systems. Accordingly, we alternate between UML and TM modeling. A sample UML model is redesigned in TM, and then UML diagrams are extracted from TM. The results clarify many notions in both models. Particularly, the TM behavioral specification seems to be applicable in UML.

• 한국정보통신학회논문지
• /
• 제4권5호
• /
• pp.1135-1142
• /
• 2000

본 연구에서는 <1.55um 대역의 편광비의존성을 가지는 반도체 광증폭기를 제작하기 위하여 InGaAsP/InP 이중이종접합 웨이퍼를 이용하여 정방매립형 반도체 광증폭기(SOA)를 제작하였다. 제작된 반도체 광증폭기의 특성을 측정한 결과 3㏈대역폭은 35nm이었으며, 3dB포화출력은 4dBm이었다. ISOmA의 CW구동에서 최대이득은 19.4dB이었다. 반도체 광증폭기의 ASE power를 ASE측정시스템을 이용하여 TE, TM모드에 대하여 측정한 결과 최대이득을 나타내는 영역부근에서 TE 및 TM모드의 분포가 거의 일치하였다. 따라서 본 연구에서 제작된 반도체 광증폭기는 비편광의존성 SOA임을 실험적으로 확인하였다.

• 산업기술연구
• /
• 제28권B호
• /
• pp.215-226
• /
• 2008

MIL-HDBK-217 has widely been used for electronics reliability predictions. Recently, the $217Plus^{TM}$ has been developed by DoD RIAC and may replace MIL-HDBK-217. A overview of the $217Plus^{TM}$ has been performed in this paper. We first reviewed the overall concepts and reliability prediction procedures. We then explained the component models and the system level model with process grading concepts. Bayesian approach incorporating field data into the predicted failure rate is another feature of this methodology.

• 전기학회논문지
• /
• 제57권7호
• /
• pp.1285-1289
• /
• 2008

In this paper, we design COMS system bus that the 1553 Data Bus is able to link all the units of the satellite managed by the SCU using one Prime Data Bus and on Redundant Data Bus. Also we analyze MIL-STD-1553B bus load and relevant exchange memory budgets in system bus of the COMS satellite. This data is used in the satellite mission and software design by system engineer.

• 대한전자공학회논문지TC
• /
• 제42권2호
• /
• pp.9-16
• /
• 2005

톤 방식을 사용하는 위성 거리 측정 시스템의 위성 링크 잡음에 대한 열화도를 분석하였다. 상${\cdot}$하향 링크에서 발생되는 배경 잡음에 의하여 위성 거리 측정 위상 값에 열화가 발생되며, 열화도는 거리 측정 시스템의 루프 잡음 대역폭과 전송 모드신호에 의해 영향을 받는다. 분석된 잡음의 영향은 위성 잡음 환경에서 동작하는 거리 측정 시스템에서 측정된 열화도와 비교 분석하였다. RAU 전송 모드에서 위성 링크 신호의 신호대 잡음비$(C/N_o)$가 43 dB인 경우, 거리 측정 대역폭에 따라 약 $14.4\~40.6m$ 이내의 오차가 발생되었으며, 이론값에 비해서는 약 0.3 dB의 열화도가 발생하였다. 원격 측정 신호와 동시에 전송되는 모드에서는 RAU 전송 모드와 거의 동등한 성능을 보였으며, RAU 모드와 동일한 성능을 갖기 위해서는 RAU+TM 다중전송 모드에 따른 전력 손실 값으로 약 2.3 dB 증가된 위성 링크 신호의 신호대 잡음비가 요구되었다.