• 한국응용과학기술학회지
• /
• 제26권2호
• /
• pp.213-223
• /
• 2009

Conventional additives were added to a newly synthesized base oil to create synthetic lubricants. Commercial polyol ester prepared in this laboratory were obtained as esterification of 1,1,1-trimethylol propane and respectively. This newly synthesized base oil had a variable chemical structure that could achieved the following properties; oxidation or thermal stability, low temperature fluidity, and higher flash points. When compared with commercial mineral lubricants, the synthetic lubricants show superior thermal and oxidation stability, and anti-wear properties.

• Tribology and Lubricants
• /
• 제9권2호
• /
• pp.16-21
• /
• 1993

Alkylbenzenes used as the synthetic lubricant base stocks were composed of the mixture of the various kinds of aromatic hydrocarbons. Their compositions have affected on the quality of synthetic alkylbenzene lubricants. Therefore, the rapid and accurate methods for the composit ional analysis are important. In this study, the compositions of the alkylbenzenes (Hv. LAB, FHv. LAB, Hv, BAB, DAB[HF], DAB[$AlCl_3$]) as synthetic base stocks have been investigated according to six average structural parameters(Tar, Nal, Asub, $\bar{n}$, nb, $T\alpha$) in the view of the molecular structures by $^{13}C-NMR$ spectroscopy. The experimental results of the oxidation $\varepsilon$ thermal stability tests have been related to the results of the molecular structural analysis.

• 소성∙가공
• /
• 제14권7호
• /
• pp.619-623
• /
• 2005

Lubrication and cooling characteristics are the most important factors of elevated temperature forging lubricants. Usually adopted lubricants in warm forging processes are graphite, synthetic and emulsion lubricants. Most widely and effectively applied lubricants are graphite lubricants, but these have a lot of problems like tool corrosion and dusty environment. In this research, boronite lubricant is considered, because it is able to substitute for graphite. Hot ring compression test, cooling test and mass production test are performed to check the validity of new lubrication pigment.

• Tribology and Lubricants
• /
• 제3권2호
• /
• pp.44-49
• /
• 1987

Molecular alignment has been postulated as influencing non-Newtonian behavior of liquid lubricants containing various additives. Four blended lubricants, two synthetic and two mineral were analyzed by FTIR spectroscopy. All of the lubricants exhibited polarization changes in their infrared emission spectra at 60$\circ$C under shear. For this work a special mockup journal bearing was constructed to seperate load and shear effects. At a temperature of 100$\circ$C polarization by shear was always reduced, presumably by Browninn motion. This work should be useful in pointing to the shear-sensitive factors. The presence of of a VI improving additive is manifested by the independence of the infrared emissivity with temperature at several wavelengths; a lubricant without a VI improver generally shows a decrease of emissivity at higher temperature.

• 윤활유협회보
• /
• 82호
• /
• pp.5-16
• /
• 1997

• 윤활유협회보
• /
• 81호
• /
• pp.6-19
• /
• 1997

• 윤활유협회보
• /
• 77호
• /
• pp.4-27
• /
• 1996

• 윤활유협회보
• /
• 76호
• /
• pp.6-27
• /
• 1996

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1987년도 학술발표초록집
• /
• pp.29-30
• /
• 1987

• 윤활유협회보
• /
• 75호
• /
• pp.4-20
• /
• 1996