• 제목/요약/키워드: Synthetic Seawater

검색결과 47건 처리시간 0.029초

지지막을 이용한 액막 추출기에 의한 합성해수 중의 $Sr^{2+}$ 이온 분리 (Separation of $Sr^{2+}$ Ion from Seawater by Liquid Membrane Permeator with Two Micro-Porous Films)

  • 주창식;이회근;정갑섭
    • 한국환경과학회지
    • /
    • 제9권6호
    • /
    • pp.517-522
    • /
    • 2000
  • Separation of strontium ion from synthetic seawater in the contained liquid membrane permeator with two micro-porous films was performed. The permeator consisted of a liquid membrane and two cells for aqueous solutions. The liquid membrane consisted of $D_2EHPA(di-2-ethylhexy1-phosphoric acid)$ and DCH18C6 (dicyclohexano-18-crown-6),diluted to 30 vol% with kerosine and was trapped between two micro-porous hydrophilic films. This liquid membrane separated two aqueous solutions, one of which was synthetic seawater and the other of which was the stripping solutions consisting of 1mol/L $H_2SO_4$ solution. The effects of various operating parameters on the extraction rate and equilibrium extraction ratio of strontium ion from synthetic seawater were experimentally examined. The addition of DCH18C6 to the $D_2EHPA$ solution caused synergy effect on the extraction of strontium ion. The permeator extracted strontium ion from synthetic seawater effectively with high membrane life time.

  • PDF

천연 및 인공해수를 이용하여 제작한 환경친화적인 전착코팅막의 형성 특성 (Formation Characteristics of Environment Friendly Electrodeposit Films Formed in Natural and Synthetic Seawater Conditions)

  • 이명훈;이찬식
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제28권6호
    • /
    • pp.1000-1009
    • /
    • 2004
  • The environment friendly calcareous deposit films were formed on steel plates by electrodeposition technique in natural seawater and synthetic solutions such as dissolved $\textrm{Mg}^{2+}$ and $\textrm{Ca}^{2+}$ ions at various potential conditions. The influence of potential conditions on composition ratio, structure and morphology of the electrodeposited films were investigated by scanning electron microscopy(SEM), energy dispersive spectroscopy(EDS) and X-ray diffractor (XRD). Accordingly, this study was provided a better understanding of the composition between the growth of $\textrm{Mg(OH)}_2$ and that of $\textrm{CaCO}_3$ during the formation of calcareous deposit films on steel substrate under cathodically electrodeposition in synthetic and natural seawater. The results showed that the formation of good overall calcareous deposited film in seawater can be achieved by controlling the Ca/Mg ratio according to interfacial pH with the effective use of the electro deposition technique.

해수담수화 전처리로서 DAF공정에서 고온의 해수에 대한 영향 특성 (Temperature Effect in the process of DAF as pretreatment of SWRO)

  • 박현진;독고석
    • 상하수도학회지
    • /
    • 제26권6호
    • /
    • pp.807-813
    • /
    • 2012
  • Flocculation and flotation are used as pretreatment steps prior to the reverse osmosis (RO) process. During seawater treatment, high temperature can change the water chemistry of seawater during the process of coagulation. It also affects bubble volume concentration (BVC) and bubble characteristics. Coagulants such as alum and ferric salts at $40^{\circ}C$ can also change flux rates in the seawater reverse osmosis (SWRO) process. In this study, the bubble characteristics in dissolved air flotation (DAF), used as a SWRO pretreatment process, were studied in synthetic seawater at $20^{\circ}C$ and $40^{\circ}C$. The flux of an RO membrane was monitored after dosing the synthetic seawater with coagulants at different temperatures. Results showed that BVC increases as the operating pressure increases and as the salt concentration decreases. The bubble size released at $40^{\circ}C$ is far smaller than that at $20^{\circ}C$The addition of a ferric salt is effective for turbidity removal in synthetic seawater at $20^{\circ}C$; it is more effective than alum. When synthetic seawater was dosed with a ferric salt, the RO membrane flux increased by 27 % at $40^{\circ}C$.

해수담수화용 역삼투막의 고회수율 공정에서의 투과 특성 (The Characteristics of Seawater RO Membrane for High Recovery System)

  • 김노원
    • 멤브레인
    • /
    • 제12권3호
    • /
    • pp.182-191
    • /
    • 2002
  • 복합 박막의 구조를 갖는 폴리아미드계 역삼투 분리막은 상용화되어 해수담수화 공정에 널리 적용되어져 왔다. 최근 고압·고회수율 공정은 기존의 해수 담수화 공정에 비해 에너지 비용 및 전처리의 규모의 측면에서 절감 효과를 가진다는 결과들이 발표되어왔다. 고압·고회수율 공정은 에너지 회수, 고압 펌프 설비, 그리고 고압 고염제거율의 역삼투막 개발에 의해 가능해 졌다. 본 연구에서는 기존의 해수담수화 공정에 사용되는 역삼투 분리막에 대한 고압·고회수율 공정 조건에서의 투과 성능을 조사하였다. 역삼투 분리막 평막의 평가에는 3.5%의 NaCl 수용액을 인공해수로 조제하여 실시하였으며 역삼투 분리막 모듈의 평가는 마산시 합포해변에서 자연 해수를 직접 사용하였다. 그 결과로 고압 고회수율 공정에 적합한 역삼투막은 고압에 대한 내압성을 갖는 역삼투막임을 보여준다. 고농축수에 대한 염제거율은 고압 운전에 의해 자연 향상되는 경향을 나타내었다.

해양어초사용을 위한 방부목재의 해수 용탈성 평가 (Evaluation of Leaching Stability of Preservative Treated Wood in the Seawater for the use of a Fish-breeding Ground)

  • 이명재;이동흡;손동원
    • Journal of the Korean Wood Science and Technology
    • /
    • 제33권3호통권131호
    • /
    • pp.53-63
    • /
    • 2005
  • 본 연구는 바다목장사업 소재로서 방부처리 목재의 사용 가능성에 대한 기초자료를 얻고자 실시하였다. CCA, CCFZ, ACQ 처리재 내 포함된 유해 중금속의 해수에 대한 용탈 안전성을 평가하기 위해 각각 2% 및 3% 방부제 수용액으로 처리한 목재를 증류수, 자연해수 및 인공적으로 염도를 조절한 인공해수에 41일간 폭로하여 기간 별 각 성분의 용탈량을 측정하였다. 바닷물에서 CCA 처리재의 구리 및 크롬의 용탈은 거의 일어나지 않았으며, 다소 많은 비소의 용탈이 있었으나 증류수에서의 용탈에 비해 적은 양을 나타내었다. CCFZ는 증류수에서 크롬과 아연의 용탈량이 매우 높았으나 바닷물에서는 훨씬 적은 용탈량을 나타내었다. 방부제 흡수량 및 인공해수의 염분 농도에 따른 용탈량에는 큰 차이가 없었다. ACQ 처리재는 CCA 및 CCFZ 처리재에 비해 많은 구리 용탈을 나타내었으며 용탈 매체에 따른 차이는 나타나지 않았다.

Study on Corrosion Characteristics and Stress Corrosion Cracking of the Weldment for HT-60 Steel in Synthetic Seawater

  • Na, Eui-Gyun;Koh, Seung-Ki;Oh, Seok-Hyung
    • Journal of Mechanical Science and Technology
    • /
    • 제14권2호
    • /
    • pp.152-158
    • /
    • 2000
  • The contents of this paper include the evaluation of corrosion characteristics and the behaviour of stress corrosion cracking (SCC) for the weldment and post weld heat treatment (PWHT) specimen and parent of HT -60 steel using a slow strain rate test (SSRT) in synthetic seawater. Corrosion characteristics were obtained from the polarization curves by potentiostat, and SCC phenomena were evaluated through the parameters such as reduction of area and time to failure by comparing the experimental results in corrosive environment with those obtained in air. Corrosion rate of the weldment was the fastest, followed by parent and PWHT specimen. SCC phenomena between the weldment of HT-60 steel and synthetic seawater were shown. Besides, SCC was dependent upon the pulling speed greatly. Maximum severity of SCC was obtained at a speed of $10^{-6}mm/min$, whereas SCC could not be seen almost at $10^{-4}mm/min$. The resistance to SCC for PWHT specimen was improved considerably compared that of the weldment at $10^{-6}mm/min$. In case of SCC failure, it was verified from SEM examination that brittle mode and lots of pits could be seen at the fractured region near the surface of the specimen.

  • PDF

막증류 공정에서 오염 인자가 플럭스 변화에 미치는 영향 (Effects of various foulants on flux changes in membrane distillation process)

  • 박찬수;이창규;김종오;최준석
    • 상하수도학회지
    • /
    • 제30권3호
    • /
    • pp.327-334
    • /
    • 2016
  • The effects of dissolved inorganic and organic matter in seawater and the characteristics of fouling on the membrane surface were investigated within membrane distillation (MD) process. The changes of the membrane flux of PE and PVDF hollow fiber membranes under natural and synthetic seawater were compared with given variances of temperature. The flux of both membranes under the synthetic seawater, without any organic matter, were higher than that of the natural seawater, indicating the organic fouling on the membrane surface. The surface of the membrane was analyzed using scanning electron microscope (SEM) to examine the fouling. The experiment with organics has shown the formation of thin film over the membrane surface, while the experiment with inorganics has shown only the formation of inorganic crystals. The results indicated the organic matter as the major foulants and that the organics affected the formation of the crystals. Permeate water conductivity of all conditions verified the quality of the water to be better if not similar to that of RO.

해수침투 조사자료의 통합적 해석을 위한 GIS의 적용 (Application of Geographic Information System for Synthetic Analysis of Multidisciplinary Data in Seawater Intrusion Assessment)

  • 최선영;황세호;박권규;신제현;윤왕중
    • Spatial Information Research
    • /
    • 제12권3호
    • /
    • pp.275-283
    • /
    • 2004
  • 국내 연안지역에서 광범위하게 발생하고 있는 해수침투를 정확하게 평가하고, 이에 대한 대책을 수립하기 위해서는 다양한 분야의 연구와 이들 상호간의 자료 통합과 유기적인 해석은 매우 중요하다. 현재 수리지구화학, 지구물리탐사 및 수리지질 등의 다양한 분야에서 해수침투 연구를 수행하고 있지만, 이들 자료의 공유나 체계적인 관리분야는 초보적인 수준으로 다양한 자료에 대한 검색과 관리가 어려울 뿐만 아니라, 자료를 통합하여 해석하는데 어려움이 따른다 따라서 본 연구에서 정밀조사 지역인 전남 영광군 백수읍 일대에서 획득하고 분석한 지표 및 시추공 물리탐사자료와 수리지화학자료를 데이터베이스로 구축하고, ArcView 스크립트어인 Avenue를 이용하여 데이터베이스 관리 및 시추공 3차원 가시화 인터페이스를 개발하였다. 이와 같은 지리정보시스템(GIS; Geographic Information System) 기반의 데이터베이스 구축과 사용자 인터페이스 개발로 다양한 종류의 해수침투 조사자료를 효율적으로 관리하고 통합할 수 있기 때문에 보다 정확하고 종합적인 분석이 가능할 것이다.

  • PDF

A New Synthetic Medium for Lactic Lactococci: Application to Marine lactic Acid Bacteria

  • KIM Joong K.;BAJPAI Rakesh K.
    • 한국수산과학회지
    • /
    • 제28권6호
    • /
    • pp.812-813
    • /
    • 1995
  • Lactococcal cells are nutritionally fastidious and thus, generally cultured either in milk or M17 medium (Terzaghi and Sandine, 1975). In this study, Lactococcus cremoris wild-type (KH) and its less­proteolytic mutant (KHA1) cells were grown on the M17 medium or with modified M17 medium by replicated parallel experiments. The modified M17 medium had the same composition as M17 medium, except that lactose was replaced by glucose. Analyses of culture-broth samples, in which the M17 and the modified M17 media were used, were conducted by high-performance liquid chromatography (HPLC). But, working with these media created noisy problems in analyses of samples. Therefore, a new semi-synthetic medium was developed on the basis of nutritional requirements (Morishita et al., 1981). The composition of the semi-synthetic medium determined on the basis of the nutritional requirements and the composition of milk, is presented in Table 1. The composition of M17 medium is also presented and compared in the table. L. cremoris KH and KHA1 cells were grown again on the new synthetic medium containing glucose or lactose. The broth samples were then drawn and analyzed by HPLC. Clearer separations of fermented products were achieved from the new medium than those with the M17 and the modified M17 media. In comparison with the M17 or the modified M17 media, growth on the new medium was good (Kim et al, 1993). Additional fermentations were also carried out at a controlled pH of 7.0, where enhanced growth of lactococcal cells was obtained. In the fermentations, samples were also analyzed for the concentrations of sugar and lactic acid. The results showed that the new synthetic medium was as good as or better than the M 17 and the modified M 17 media. This is because casein hydrolysate in the synthetic medium provided a ready supply of amino acids and peptides for L. cremoris KH and KHA1 cells. Lactic acid bacteria (LAB) including Lactococcal cells have been known to be an effective means of preserving foods, at the same time as giving particular tastes in fields of dairy products. LAB also have always occupied an important place in the technology of sea products, and marine LAB have known to be present in traditional fermented products (Ohhira et al, 1988). To apply the new synthetic medium to marine LAB, two different LAB were isolated from pickled anchovy and pollacks caviar and were grown on the new media in which various concentrations of NaCl $(3, 5, 7 and 10\%)$ added. They were also grown on the medium solution in natural seawater $(35\%o\;salinity)$ and on the solution of natural seawater itself, too. As seen in Fig. 1, Marine LAB were grown best on the synthetic medium solution in natural seawater and the higher concentrations of NaCl were added to the medium, the longer lag-phase of growth profile appeared. Marine LAB in natural seawater were not grown well. From these results, the synthetic medium seems good to cultivate cells which are essential to get salted fish aged. In this study, it showed that the new synthetic medium provided adequate nutrition for L. cremoris KH and KHA1 cells, which have been used as cheese starters (Stadhouders et al, 1988). Using this new medium, the acid production capability of starter cultures could be also measured quantitatively. Thus, this new medium was inferior to the M17 or the modified M17 medium in culturing the cheese starters and in measuring fermentation characteristics of the starter cells. Moreover, this new medium found to be good for selected and well-identified marine LAB which are used in rapid fermentations of low-salted fish.

  • PDF

항공 TEM 을 이용한 천해지역에서의 퇴적층 두께 및 기반암 심도 원격탐사에 관하여 (Towards remote sensing of sediment thickness and depth to bedrock in shallow seawater using airborne TEM)

  • Vrbancich, Julian;Fullagar, Peter K.
    • 지구물리와물리탐사
    • /
    • 제10권1호
    • /
    • pp.77-88
    • /
    • 2007
  • 선행된 연구에서의 성공적인 수심도 작성 예에 뒤이어, 항공전자탐사를 이용한 해저면 특성파악 가능성이 고찰되었다. 헬리콥터에 탑재된 시간영역전자탐사 (TEM) 장비에서 얻어진 자료의 1D 역산으로부터 추정된 퇴적층의 두께가 해양 탄성파 연구에 기초하여 얻어진 추정치와 비교되었다. 일반적으로, 해수의 깊이가 대략 20 m이고 퇴적층의 두께가 40 m 미만이면 퇴적층의 두께 즉 비전도성 기반암까지의 깊이는 두 경우에 있어서 타당한 범위 내에서 일치됨을 보였다. 잡음이 섞인 합성자료의 역산은 초기 모형이 실제모형과 차이가 나는 경우에도 수직 전자탐사 유일성 이론과 일치하게 역산 후 실제모형과 매우 닮은 결과를 보여주었다. 잡음이 섞인 합성자료로부터 얻어진 천해 해수 깊이에 관한 표준편차는 대략 깊이의 ${\Box}5\;%$ 정도였으며, 이는 실제자료의 역산 시 대략 ${\pm}1\;m$ 정도의 오차를 우발할 수 있다. 이에 상응하는 기반암 깊이 추정의 불확실성은 대략 ${\pm}10\;%$에 이른다. 잡음이 포함된 합성자료로부터 얻어진 해수와 퇴적층의 평균 역산 두께는 대략 1 m 정도의 정밀도를 나타냈고, 중합에 의해 정밀도가 향상되었다. 주의 깊게 보정된 항공 TEM 자료를 이용하면 퇴적층의 두께와 기반암의 지형을 조사할 수 있다는 가능성을 알 수 있었으며, 천해에서의 해저면 저항치를 알아내기 위한 방법으로서의 가능성도 보여 주었다.