• Journal of Power Electronics
• /
• 제15권6호
• /
• pp.1593-1600
• /
• 2015

This paper proposes a novel compensation algorithm of current offset error for single-phase linear compressor in home appliances. In a half-bridge inverter, current offset error may cause unbalanced DC-link voltage when the DC-link is comprised of two serially connected capacitors. To compensate the current measurement error, the synchronous reference frame transformation is used for detecting the measurement error. When an offset error occurs in the output current of the half-bridge inverter, the d-axis current has a ripple with frequency equal to the fundamental frequency. With the use of a proportional-resonant controller, the ripple component can be removed, and offset error can be compensated. The proposed compensation method can easily be implemented without much computation and additional hardware circuit. The validity of the proposed algorithm is verified through experimental results.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.231-231
• /
• 2000

It is proposed that a novel method which can compensate the time delay occurs in overall system, when voltage and current is measured, owing to LPF, hysteresis control inverter and microprocessor program computation time. The Proposed scheme estimates the time delay using the difference between Q-axis stator current command and time delayed Q-axis stator current in synchronous reference frame, and compensates the time delay of voltage and current using angular displacement of DQ transformation. The proposed scheme compensates accurately the time delay occurs in overall system. Therefore performance of vector control system is improved highly and it is verified by simulation and experiment.

• 전기학회논문지
• /
• 제65권10호
• /
• pp.1648-1654
• /
• 2016

This paper analyzes complex vector current control for the enhanced cross-coupling compensation in accordance with parameter variation in grid-connected inverter system, and verifies through simulation and experiment. Complex vector current control is performed in the synchronous reference frame through d-q transformation. It generates cross-coupling components with rotating nominal angular frequency. In general, cross-coupling elements are compensated by decoupling terms added to output of conventional decoupling PI controller. But, it is impossible to compensate them perfectly which transient response is especially deteriorated such as large overshoot and slow tracking, when variation of grid impedance or measurement error occurs. However, complex vector current control can improve stability and response characteristic of current control regardless of the situation as before. Decoupling controller and complex vector controller are represented through complex forms, and these controllers are analyzed by using frequency response in s-domain, respectively. It is verified that complex vector controller has more superior response characteristic than decoupling controller through MATALB, PSIM and experimental in 5kW grid-connected inverter when L filter parameter is varied from 1.1mH to increase double, 2.2mH.

• Journal of Power Electronics
• /
• 제17권1호
• /
• pp.262-271
• /
• 2017

This paper studies the performances of five typical Phase-locked Loops (PLLs) for distorted and unbalanced grid, which are the Decoupled Double Synchronous Reference Frame PLL (DDSRF-PLL), Double Second-Order Generalized Integrator PLL (DSOGI-PLL), Double Second-Order Generalized Integrator Frequency-Lock Loop (DSOGI-FLL), Double Inverse Park Transformation PLL (DIPT-PLL) and Complex Coefficient Filter based PLL (CCF-PLL). Firstly, the principles of each method are meticulously analyzed and their unified small-signal models are proposed to reveal their interior relations and design control parameters. Then the performances are compared by simulations and experiments to investigate their dynamic and steady-state performances under the conditions of a grid voltage with a negative sequence component, a voltage drop and a frequency step. Finally, the merits and drawbacks of each PLL are given. The compared results provide a guide for the application of current control, low voltage ride through (LVRT), and unintentional islanding detection.

• 조명전기설비학회논문지
• /
• 제19권3호
• /
• pp.66-74
• /
• 2005

최근 급속도로 발전되고 있는 산업분야에서 서보시스템은 빠른 응답특성과 고도의 정밀성이 요구되고 있다. 이러한 특성의 요구로 인하여 산업용 서보전동기 구동시스템에 고정자 혹은 회전자 자속벡터의 순시위치와 고정자 전류를 검출하여 좌표변환에 의해 고정자 전류를 여자성분과 토크성분으로 분리 제어하는 벡터제어 이론이 많이 적용되고 있다. 벡터제어에서는 좌표변환과 SVPWM 발생을 위해 많은 연산을 요구하므로 디지털 제어시스템에서 DSP에 많은 부담을 주고 있다. 그러나 직접토크제어(DTC) 알고리즘은 디지털 제어 구조로 토크와 고정자 자속 성분의 전류제어에 룩업 테이블을 사용하므로 벡터제어처럼 많은 제어기와 복잡한 연산을 필요로 하지 않고, 동적 응답특성이 전동기의 정수변화에 영향이 적으면서 직접 전동기의 토크와 고정자 자속을 독립적으로 제어할 수 있는 장점을 가진다. 따라서 본 논문에서는 표면 부착형 영구자석 동기전동기(SPMSM)를 사용하여 DTC에 의한 서보 전동기 제어와 벡터제어에 의한 서보 제어시스템 결과를 비교하여 직접토크제어 알고리즘의 산업용 서보 시스템으로의 적용 가능성을 확인하였다.