• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.11a
• /
• pp.1199-1202
• /
• 2017

IoT-Cloud 융합 가상 기계 시스템은 저성능의 사물인터넷 장비에서 고성능 클라우드 서버의 연산력을 제공받는 오프로딩 기법을 사용한다. 오프로딩 기법을 사용하는 경우 실행 대상 프로그램은 사물인터넷 장비와 클라우드 서버 사이에 일관성이 유지되어야하기 때문에 문맥 동기화가 필요하다. 기존 IoT-Cloud 융합 가상 기계의 문맥 동기화 방식은 전체 문맥 동기화를 시도하기 때문에 네트워크 오버헤드가 증가하여 비효율적이다. 네트워크 오버헤드는 오프로딩 실행 성능을 기존보다 감소시킬 수 있기 때문에 효율적인 오프로딩을 위해서는 오프로딩 실행에 필요한 문맥 정보만을 동기화하여 네트워크 오버헤드를 줄여야 한다. 본 논문에서는 효율적인 오프로딩 실행을 위해 정적 프로파일링을 통해 추출된 문맥 정보를 기반으로 오프로딩 실행에 필요한 문맥 정보만을 동기화하는 문맥 동기화기를 설계 및 구현하였다. 오프로딩 실행에 필요한 문맥 정보만 동기화가 이뤄지면 문맥 동기화 시 발생하는 네트워크 오버헤드의 크기가 줄어들기 때문에 효율적인 오프로딩 실행이 가능하다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.3
• /
• pp.14-21
• /
• 1989

In the digital transmission equipment, the input jitter tolerance is a function of input timing recovery circuit characteristics. Especially, in the asynchronous multiplexers, it is also a function of the frame format, the buffer sizes in the synchronizer and desynchronizer, the PLL transfer function, and operating range of VCO in PLL In this paper, a new algorithm for calculating the jitter tolerance of the saynchronous digital transmission equipment is presented. With the new algorithm, we analyzed how the above factors limit the jitter tolerance in the equipment. We also measured the input jitter tolerance for a 45M-140M multiplexing equipment, whose results show the same trend with calculated tolerance.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.6
• /
• pp.949-954
• /
• 2017

Multiple input, multiple output orthogonal frequency division multiplexing (MIMO OFDM) systems are the candidate for the future wireless communications. However, the main drawback of MIMO OFDM systems is their sensitivity to carrier frequency offset (CFO) similar to the single input, single output OFDM (SISO OFDM) systems. The demodulation of a signal with CFO causes large bit error rate and degrade the performance of a symbol synchronizer. It is important to estimate the frequency offset and minimize or eliminate its impact. In this paper, we propose a technique based on observation training symbols for estimating CFO by employing block-by-block estimation for SISO OFDM systems. The technique of SISO OFDM is extended to the MIMO OFDM systems. Simulation results show that the proposed techniques have a superior performance and better accuracy compared to the conventional techniques in the sense of mean square error.

• Spatial Information Research
• /
• v.19 no.4
• /
• pp.73-79
• /
• 2011

With the recent increase in demand for geo-registered imagery, Mobile Mapping Systems(MMS), which can quickly construct geographic information, has become important. The main part of MMS is the high-precision observation system, which collects geographic information at a certain speed. MMS has a complex data generation process and requires a standard-specific vehicle for its use, limiting its application range. In this paper, lightweight MMS is proposed to overcome its complexity by replacing the time synchronizer with a high-speed camera and by stabilizing motion with MEMS IMU/GPS. The proposed low-cost, portable method is expected to produce of geo-registered imagery efficiently.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.8
• /
• pp.156-164
• /
• 2014

In a delay line type of a time-to-digital converter implemented in Field Programmable Gate Array, the timing accuracy decreases for a longer carry chain. In this paper, we propose a structure that has a multi-phase clock and a state machine to check metastability; this would reduce the required length of the carry chain with the same time resolution. To reduce the errors caused by the time difference in the four delay lines associated with a four-phase clock, the proposed TDC generates a single input pulse from four phase clocks and uses a single delay line. Moreover, the state machine is designed to find the phase clock that is used to generate the single input pulse and determine the metastable state without a synchronizer. With the measurement range of 1 ms, the measured resolution was 22 ps, and the non-linearity was 25 ps.

• Journal of Life Science
• /
• v.28 no.8
• /
• pp.985-991
• /
• 2018

Biological clocks are the basis of temporal control of metabolism and behavior. These clocks are characterized by autonomous free-running oscillation and temperature compensation and are found in animals, plants, and microorganisms. To date, various biological clocks have been reported. These include clocks governing hibernation, sleep/wake, heartbeat, and courtship song. These clocks can be differentiated by the period of rhythms, for example, infradian rhythms (> 24-hr period), circadian rhythms (24-hr period), and ultradian rhythms (< 24-hr period). In yeast (Saccharomyces cerevisiae), at least five different autonomous oscillations have been reported; (1) glycolytic oscillations (T = 1~30 min), (2) cell cycle-dependent oscillations (T = 2~16 hr), (3) ultradian metabolic oscillations (T = 15~50 min), (4) yeast colony oscillations (T = a few hours), and (5) circadian oscillations (T = 24 hr). In this review, we discuss studies on oscillators, pacemakers, and synchronizers, in addition to the application of biological clocks, to demonstrate the nature of autonomous oscillations, especially ultradian metabolic oscillations of S. cerevisiae.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.145-147
• /
• 2010

This study is the visually emotional identification lighting for easy to distinguish using 3colors LED on AtoN facility in shore and harbor, which have realized a controller for certainly express the mouth of a harbor by red light and green light of both sides a harbor and for synchronization at a time of right and left or serial sequential the harbor guidance light through synchronizer or timer by GPS. There is expectation effect that is prevent a confusion about distinguish of facility by ship's operator and to beautify a night scene of harbor, which is expressed to emotional identification lighting differ from great many lighting of harbor with variable color lighting the lighthouse body and vertical layer color lighting using LED. The function of AtoN is adapted that guidance light through synchronization or serial sequential lighting and display of harbor safety message by CW lighting, and this system is the power consumption greatly reduce by candle alternated high light LED.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.3
• /
• pp.53-63
• /
• 2006

The general objective of this study was to investigate biomechanical characteristics of bowling swing using three-dimensional cinematography. This study focused specifically on movements of the upper body segments during a bowling swing. Eight elite female bowling players participated in this study. Subjects performed bowling swing and their performance was sampled at 60 frame/sec using two high-speed video cameras with a synchronizer. After digitizing images from two cameras, the two-dimensional coordinates were used to produce three-dimensional coordinates of the 12 body segments (20 joint reference makers). The obtained three-dimensional coordinates were fed to a custom-written kinematic and kinetic analyses program (LabView 6.1, National Instrument, Austin, TX, USA). The analyses determined the linear and angular kinematic variables of the body segments with which joint force and torque of the lower and upper trunks and the shoulder were estimated based on the Newton-Euler equations. It was found that during the bowling swing the peak linear velocities of the body segments were reached in sequence the trunk, the shoulder, the elbow, the wrist, and the bowl. This result indicates that linear momentum of the lower body and the trunk transmits to the arm segment during the bowling swing. The joint torques of the torso and the arm occurred almost simultaneously, indicating that bowling swing seem to be a push-like motion, rather than a proximal-distal sequence motion in which many of throwing motions are categorized. The ultimate objective of the bowling swing is to release a heavy-weight bowl with power and consistency. Therefore, the bowling swing observed in this study well agrees with that bowlers use the stepping to increase the linear velocity of the bowl, the simple pendulum system and the push-like segmental motion in the torso and the arm segment to enhance the power at the release of the bowl.

• International Journal of Fluid Machinery and Systems
• /
• v.9 no.3
• /
• pp.245-255
• /
• 2016

The alternating flow hydraulics (AFH) had demonstrated the unique features in the past. One of the most well-known inventions was the hydraulic machine-gun synchronizer, which had become the standard equipment of airplane during World War I. The studies on the AFH between 1960 and 1980 had trigged many researchers' interests and reached the summit. The disadvantages of the AFH like low efficiency and cooling difficulty had prevented the further development. Few people are engaged in studying the AFH at present. However, the unique characteristics of the AFH inspire the researchers to continuously explore the new special suitable applications. The overviews of the AFH and the new potential application in the geotechnical testing field have been discussed in this paper. First, the research results of the AFH in the past have been summarized. Then, the classifications of the AFH have been introduced in detail according to the working principle, the number of hydraulic transmission pipelines and the mode of input energy. The advantages and the disadvantages of the AFH have been discussed. A novel potential suitable application in the soil test field has been presented at last. The detailed designing ideas of a new dynamic trixial instrument have been given, which will be a more innovational and energy-saving plan according to the current studies. A series of simulation experiments have been done. The simulation results show that the proposed scheme for the new dynamic trixial instrument is feasible. The paper work will also give some inspirations in the reciprocating motion control system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.593-599
• /
• 2007

PC based DVR replaces existing analog CCTV system therefore expands the field and DVR is used for monitoring and security so it requires exact time(clock). But DVR system can't maintains exact clock causing several reasons. For providing exact time information we should use additional system. For economical and usable environment, using GPS system is most suitable suggested solution than use WAN(Wide Area Network). Therefore in this paper for analysis the result of PC based DVR's system clock using GPS system, 1) clock source receiving module that receives the clock form GPS satellite and 2) GPSW H/W units that provide clock source to PC Based DVR 3)Daemon software named PCSW which adjust PC's clock so system could reduced the clock difference with UTC clock and measured the result.