• The KIPS Transactions:PartC
• /
• v.9C no.2
• /
• pp.227-234
• /
• 2002

MPLS which integrates routing of layer 3 and switching of layer 2, enables support for fast forwarding, traffic engineering and virtual private network services. GSMP is open interface protocol between a label switch and a controller, and it provides connection, configuration, event, performance management and synchronization. In the GSMP open interface, the functions of network management can be located either in the controller or in the label switch. To simplify the label switch and enhance the efficiency of resources, we adopt the network management model, in which the SNMP agent is located in the controller and is interworked with the GSMP. We presented the interworking scenrios between the GSMP and the network management of MPLS. We implemented the controller to verify the realization of our adopted network management model, and measured the connection setup delay of the provisioned connection.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.12
• /
• pp.3652-3661
• /
• 1999

To support multimedia applications such as a multimedia communication systems and multimedia broadcasting, an operating system need to predict their timing-constraints. So, In this real-time systems, we must solve the priority inversion problem that may make the behavior of unpredictable systems and need a real-time server model that provides a better preemptability and minimizes a system overhead. In current real-time systems, the single thread server model, the worker model and the dynamic server model are being used for synchronization but they cannot propose an effective structure for managing shared resources. In this paper, the priority inheritance protocol is used to solve the priority inversion problem and the hybrid prioritized worker model is proposed, which can provide a more effective structure and a faster response time minimizing a system overhead. The hybrid prioritized worker model is to combine the static and the dynamic prioritized worker model, and have a better performance than other models in response time which is an important factor in a real-time system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.10B
• /
• pp.899-915
• /
• 2003

Delivering rich and continuous media contents robustly over a wide range of network conditions of the wired/wireless Internet is a highly challenging task. To address this challenges, the continuous media applications at the edge of network has become more and more adaptive while the best-effort Internet is slowly progressing towards improved networking services. That is, the role of network adaptive media delivery, which dynamically links the quality demand of application contents to the underlying networking services, has become more crucial. In this paper, we will first review the required network adaptation functionalities seen from the application side: congestion control / rate control, error control, and synchronization / adaptive playout. Then, we start the coverage of networking support issues that helps the realization of network adaptive media streaming - from network support and protocol support toward consolidated support via middleware. Finally, we propose a dynamic network adaptation framework that efficiently leverages its awareness of both media application (including contents) and underlying networking support.

• Journal of Positioning, Navigation, and Timing
• /
• v.12 no.3
• /
• pp.245-255
• /
• 2023

Time comparison techniques are necessary for generating and keeping Coordinated Universal Time (UTC) and distributing standard time clocks. Global Navigation Satellite System (GNSS) Common View, GNSS All-in-View, Two-Way Satellite Time and Frequency Transfer (TWSTFT), Very Long Baseline Interferometry (VLBI), optical fiber, and Network Time Protocol (NTP) based methods have been used for time comparison. In these methods, GNSS based time comparison techniques are widely used for time synchronization in critical national infrastructures and in common areas of application such as finance, military, and wireless communication. However, GNSS-based time comparison techniques are vulnerable to jamming or interference environments and it is difficult to respond to GNSS signal disconnection according to the international situation. In response, in this paper, Code-Division Multiple Access (CDMA) based All-to-All TWSTFT operation method is proposed. A software-based simulation platform also was designed for performance analysis in multi-TWSTFT signal environments. Furthermore, code and carrier measurement jitters were calculated in multi-signal environments using the designed simulation platform. By using the technique proposed in this paper, it is anticipated that the TWSTFT-based time comparison method will be used in various fields and satisfy high-performance requirements such as those of a GNSS master station and power plant network reference station.

• Journal of Satellite, Information and Communications
• /
• v.3 no.1
• /
• pp.41-47
• /
• 2008

Line-of-sight communications cannot easily support korean armed forces because of mountainous terrain. ADD(Agency for Defense Development) introduced ANASIS(Army Navy Air-force Satellite Information System) to meet the Korean warfighter's operational needs. Currently, army's military satcom terminal is designed for either fixed site or on-the-pause operation. The US army is under development of multi-band integrated on-the-move satellite terminals to let the army's communication capability to keep pace with globally deployable Joint Task Force for network-centric application. In this paper we analyzed X-band and Ka-band link and subsystem requirement. Our focus here is to describe key technical issues. Especially, On the basis of 3dB beam width of 0.9m antenna, Tracking accuracy and disturbances compensation signal processing on-the-move of Antenna Tracking system is analyzed. Also, protocol is analyzed that minimize blockage on the move due to an obstacle. when the received signal blocked, it stop to transmit burst signal and retransmit when blockage removed through received synchronization signal monitoring. Analyzed specification will be used to make prototype terminal to analyze risk for mass production

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.10
• /
• pp.1403-1406
• /
• 2005

The present study was undertaken to study the effect of thermal stress on sexual behaviour of superovulated ewes. Fourteen adult Bharat Merino ewes with an average body weight of 29.4${\pm}$2.34 kg were randomly allocated into two groups of 7 each. All the animals were grazed on natural pasture in the morning and evening hours and housed in shed during night. Animals of Group-1 were housed in shed from 10:00 to 16:00 h while the animals of Group-2 were exposed to thermal stress in a hot chamber ($40^{\circ}C$ /6 h/day). All the animals were offered drinking water once a day at 16:30 h. Meteorological observations i.e. dry bulb, wet bulb, minimum and maximum temperature were recorded daily inside the shed as well as in hot chamber throughout the experimental period. For superovulation of animals, standard protocol developed at the Institute, using FSH (Ovagen 5.4 mg in eight injections) and PMSG (200 IU) was followed. Various sexual behaviour parameters (circling, tail fanning, head turning, standing and approaching to ram) and estrus incidence (onset of estrus and estrus duration) were observed in both the groups. The different estrus symptoms were graded subjectively on arbitrary scale of 0-5 where 0 representing no sexual behaviour (0%) and 5 representing maximum intensity in sexual behaviour (100%). Estrus was detected with the help of a marked aproned ram of proven vigor at six hourly intervals. The average percent values for sexual behaviour parameters recorded in Group-1 and Group-2 animals were 53.7${\pm}$3.76 vs. 41.1${\pm}$2.18 for circling, 71.8${\pm}$5.42 vs. 49.0${\pm}$4.41 for tail fanning, 64.7${\pm}$3.30 vs. 44.5${\pm}$4.34 for head turning, 90.1${\pm}$3.16 vs. 75.8${\pm}$4.02 for standing and 63.8${\pm}$4.8 vs. 41.9${\pm}$4.58 for approaching to ram. Animals exposed to thermal stress had significantly lower values of these sexual behaviour parameters. The animals kept in shed exhibited estrus earlier (25.4${\pm}$1.12 h) and duration was higher (37.7${\pm}$1.59 h) as compared to animals exposed to thermal stress i.e. 30.6${\pm}$1.16 h and 31.7${\pm}$3.57 h, respectively. The findings of the study indicate that thermal stress reduces the intensity of sexual behaviour in ewes and may result in failure of the animal to mate and conceive.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.4
• /
• pp.628-645
• /
• 2010

To perform the engagement level simulation between the underwater vehicle model and the surface model those are constituted with various systems/ sub-systems, we implemented four different federates as a federation according to the IEEE 1516 HLA (High Level Architecture) protocol that is the international standard in the distributed simulation. Those are CFCS (Command and Fire Control System) federate, motion federate, external entities (torpedos, countermeasure and surfaceship) federate, and visualization federate that interacts with OSG (Open Scene Graph)-based visualization rendering module. In this paper, we present the detailed method about the model constitution for discrete event simulation in the distributed environment. For the sake of this purpose, we introduce the DEVS (Discrete Event System Specification)-HLA-based modeling method of the CFCS federate that reflects not only the interations between models, but also commands from user and tactics manager that is separated from the model. The CFCS federate makes decisions in various missions such as the normal diving, the barrier misision, the target motion analysis, the torpedo launch, and the torpedo evasion. In the perspective of DEVS modeling, the CFCS federate is the coupled model that has the tactical data process model, command model and fire control model as an atomic model. The message passing and time synchronization with other three federates are settled by the $m\ddot{a}k$ RTI (Runtime Infrastructure) that supports IEEE 1516. In this paper, we provides the detailed modeling method of the complicated model that has hierarchical relationship such as the CFCS system in the submarine and that satisfies both of DEVS modeling method for the discrete event simulation and HLA modeling method for the distributed simulation.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.5
• /
• pp.17-26
• /
• 2013

ISO/IEC 29157 originally developed in the Republic of Korea and is based on commercially available PicoCast v1.0. ISO/IEC JTC1 SC6 was registered by the international standard on May 2010. A single platform for a variety of applications and media formats to support development objectives were. ISO/IEC 29157 based wireless networks, ie, Pico-net to master node periodically transmit sync signal is synchronized to the number of slave nodes have the communications structure. Pico-net also supports a variety of network topologies and direct communication between nodes(single-hop communication) and QoS is guaranteed. But Pico-net network structure has the following problems. Loss of communication problems due to mobile nodes, resulting in limitations of node mobility and wireless network operation range of conventional wireless networks operating range less than 1/4 was reduced to the problem. In this paper, a possible solution to the problems mentioned is proposed, using multi-hop communication technology and sync signal transmission technology between nodes.