• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.6 no.6
• /
• pp.49-57
• /
• 1992

This paper proposes a Intel 8097 single-chip microprocessor based instantaneous voltage control scheme of inverter for UPS(Uninterruptible Power Supply). There microprocessors are used to control the output voltage and frequency of the inverter, the synchronization with by-pass, and the switching of the static switch. And the status and operating conditions of UPS systems is monitored by micro processor. The inverter output voltage is controlled instantaneously with a double regulation loop so that it has very good dynamic response for the varying loads or nonlinear loads as a rectifier. And also, the software and hardware of control system is described. From simulation and experimental results, it is shown that the proposed scheme has very good performance.

• Fire Science and Engineering
• /
• v.24 no.1
• /
• pp.24-30
• /
• 2010

An integrated type fire alarm control panel which is for the purpose of the ubiquitous environment application is reported. For the ubiquitous environments, mainly three additional functions upon its inherent capabilities are implemented. That is, wireless technology with ZigBee capability is applied for the interface of ZigBee detectors. Camera images can be displayed in the fire alarm control panel in which images are transferred via ethernet. For the time synchronization of the distributed fire alarm control panel, GPS module is introduced and implemented in the system.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.179-182
• /
• 1997

In a training simulator for power plant, operator's action in the MCR(Main Control Room) are given to plant process and computer system model as an inputs, and the same response as in real power plant is provided in real time. Inter-process communication and synchronization are especially important among various inputs. In the plant simulator, to simulate the digital control system such as FOXBORO SPEC-200 Micro control system, modification and adaptation of control card(CCC) and its continuous display station(CDS) is necessary. This paper describes the modeling and simulation of FOXBORO SPEC-200 Micro control system applied to Younggwang nuclear power plant unit #3 & 4, and its integration process to the full-scope replica type training simulator. In a simulator, display station like CDS of FOXBORO SPEC-200 Micro control system is classified as ITI(Intelligent Type Instrument), which has a micro processor inside to process information and the corresponding alphanumeric display, and the stimulation of ITI limits the important functions in a training simulator such as backtrack, replay, freeze and IC reset. Therefore, to achieve the better performance of the simulator, modification of CDS and special firmware is developed to simulate the FOXBORO SPEC-200 Micro control system. Each control function inside control card is modeled and simulated in generic approach to accept the plant data and control parameter conveniently, and debugging algorithms are applied for massive coding developed in short period.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.85-86
• /
• 2013

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1890-1891
• /
• 2011

본 논문은 변형 가능한 타원형의 포메이션을 유지하기 위한 군집 로봇의 행동 동기화 알고리즘을 제안한다. 알고리즘은 매개 변수 함수를 이용한 타원형 포메이션에서의 포텐셜 필드 생성 부분과 개별 로봇이 타원으로 이동하기 위한 인력 및 충돌 회피를 위한 척력 함수 부분으로 나누어진다. 제안한 알고리즘은 시뮬레이션을 통해 군집 로봇의 행동을 제어하는데 효과적임을 입증하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.6
• /
• pp.1289-1301
• /
• 1997

In a SDH network, one of the most important issues is the realization of network synchronization. In this paper, we presented the relationship between parameters and control algorithm of DP-PLL for design in a SDH based time, SSM processing time, PJE counter and reference switching time, and analyzed phase transients for one node and mutiple nodes through our simulation results with a standard specification. We suggested suitable design method of SDH-DP-PLL.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.05a
• /
• pp.1294-1296
• /
• 2007

The IEEE 802.11 DCF forces neighboring nodes of an active transmitter to switch into inactive state. This conservative nature brings frame latency at transmitter neighborhood. This work exploits the IEEE 802.11n Frame Aggregation scheme to allow simultaneous transmissions from nodes that are neighbors to each-other. This is accomplished by the synchronization of control and data transmissions in slots of fixed length. Proposed scheme reduces the frame latency and improves aggregated network throughput.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.11-14
• /
• 1998

This paper introuces a new efficient method of synchronization acquisition which is the most important element in DS-CDMA system using the phase offset of binary code. This approach uses the binary code function which can easily estimate the phase offset from the received spreading waveforms which respect to the receiver-stored replica of the spreading code. This paper proposes the initial acquisition model with repeat error control device that is good for perfomance. The hardware is implemented by TMS320c30

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.686-689
• /
• 1999

발전소 운전원 훈련용 시뮬레이터는 중앙제어실(MCR:Main Control Room) 운전원의 운전결과가 실시간 운영체계하에 발전소 프로세스 모델 및 컴퓨터 시스템과 통합되어 실제 발전소와 같은 반응을 운전원에게 제공하여야 한다. 따라서 시뮬레이터에는 프로세스의 동특성 이외에도 제어시스템의 모델링 및 운전원과 인터페이스되는 제어기들이 실제적으로 구성되어야하며, 이들 제어기와 컴퓨터시스템간 다양한 입력간의 통신 및 동기(Synchronization)가 중요하다. 본 논문에서는 원자력 발전소 시뮬레이터에서 쓰이는 지능형 계기(Intelligent Type Instrument)로 분류된 기기를 살펴보고 시뮬레이션을 위해 개발 구현된 방법들을 기술하고자한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.799-803
• /
• 1991

This study proposes a CIM shell that is consisted with computers connected by a LAN. Since this system excludes production hardwares, physical movements of devices are represented by computer simulation. On the other hand, softwares that dictate system operation are real, and consu- me physical time. Thus the shell becomes half-real-half-simulation that requires events synchronization mechanism. This study shows the building procedure of such shell as well as an example of application of the shell.